| Accessory shoe-accessories - where can I get something?
Question of DReffects:
Juli 2007
Moin moin,
Wolfgang's great after I 7 "TFT at its XH A1've seen (* gier *) I want something synonymous - is my only problem: I find no accessories for the assembly s.zubehörschuh.
Ideally I would like a quasi-extension of the shoe - an adapter to the left where there is still a second bracket is to say, two sennheiser funksets weiterzubetreiben or provide a holder in the microphone holder.
because someone has a tip? :)
thx
Reply ruessel:
What have you already knit myself .... you take a Alurohr what is in the microphone holder of the XH A1 and mount that fits a screw with the ball for the LCD screen. Done.
Reply overdose:
because someone has a tip? :)
Pricey, but not bad ...
Reply Axel:
That was just me. The resolution of this
Reply ruessel:
the real Resolutiondes LCD is the same, here are individually FARBpixel angeben! I think this monitor is not suitable, it is only 4:3.
Reply Axel:
... is only 4:3.
Oops .. This
Reply ruessel:
Yes.
These monitors (real Resolution480x800Pixel) are all somehow equal, that they probably all come from the same panel factory in China. Should be careful with the voltage to sit on the board with 16V capacitors. These are synonymous under tension when the monitor is only s.dem Battery angeklemmt and is set to "off" means. I use 2 camera batteries in series is much more voltage at lower loads submit, here is the danger of leakage or even burst, where the capacitors.
Reply Axel:
These monitors (real Resolution480x800Pixel) are all somehow equal ...
Merci, then snap my times and the Cam go to the relevant Elektroverwertern.
Reply DReffects:
What have you already knit myself .... you take a Alurohr what is in the microphone holder of the XH A1 and mount that fits a screw with the ball for the LCD screen. Done. because my problem starts already ^ ^ I have no kugelkopf for TFT I have;) I would round off the microphone holder synonymous actually happy for the sennheiser funksets, because the fact is with the tube not be a bad idea. there somewhere as accessory shoe elements individually as I assemble it? zb on such a tube? :)
for image
how did you done since? since the monitor sits on the so shoe accessories directly. the wär synonymous for my constellation desirable because I somehow like to centrally monitor would:)
thanks for the help!
Bzlg. The monitors themselves - the VariZoom has only one x234er resolution, have a MM400 with 800x480 here and already provides the terms for my best, 'ok' from. A pity that there is no affordable monitor with YUV input is (1000 ¬ for this one
had with the 9 "geliebäugelt here - has also 800x480 and is quite favorable: http://www.carlights.de/stand-einbau-monitore/9-tft-monitor-cm09.html
what do you think? :)
Reply Axel:
Oookay, so all the LCDs in Con ... and Sat .. seen from super cheap, but it is not! As guidance okay, but colors or sharpness to judge probably not so great. In these shops synonymous hopeless to ask for a test, at least s.einem Saturday afternoon, but the DVDs do not allow input particularly "brilliant" images to expect as the label claim. Well, that probably explains the price difference to the more expensive monitors. Is it with all, except with Aldi coffee, which is really cheap and good.
Reply DReffects:
Oookay, so all the LCDs in Con ... and Sat .. seen from super cheap, but it is not! As guidance okay, but colors or sharpness to judge probably not so great. In these shops synonymous hopeless to ask for a test, at least s.einem Saturday afternoon, but the DVDs do not allow input particularly "brilliant" images to expect as the label claim. Well, that probably explains the price difference to the more expensive monitors. Is it with all, except with Aldi coffee, which is really cheap and good. may I ask where you were and where it is with you nearby car TFTs are? würd sowas synonymous gladly look at it:)
Reply ruessel:
The Still Image still shows the old stand, but now I have any of mounted ball head, so that the monitor can easily be incorporated into the working direction.
This ball is in the photo trade, plus a flash adapter disassemble and assemble including ready.
My practical experience is something so sober, which makes the entire Camera is already heavy and unwieldy, so I would not take 9 inch screen, but will remain at 7 inches.
Another sore point is that the XH A1 no sharp edges and zebra on the BNC jack ausspielt, which restricts the already quite a whole. Nevertheless, I use in studio recordings are pleased the screen, so customers can immediately discredited the picture without it being a scrum in front of the screen there, the original is too small and too Winkelanhängig. On the sharpness is dragging the whole restricted only to recommend, sorry ...... which is at 2000 Euro camera screens, but as these are synonymous not FullHD pixels.
Reply DReffects:
thanks for the info. werd mich mal s.montag on photo to our business here and ask if the have something:) is somehow standardized or simply because I say "I would like to NEN kugelkopf"? ^ ^
Reply Axel:
Well, I would say this @ Dreffects: D'Wohne in downtown Düsseldorf, ProM, MM, ConEl, satellite and FOKO all in stone throw distance. Still Image Koch is well priced as synonymous her usually range from the first address, unfortunately, without looking.
I would point s.deiner Wolfgang Council abide by the microphone holder to use. Microphone holder suitable as it is only conditionally (bad - actually no - decoupling / suspension, to a large diameter for normal directional microphones). The idea of a screw through a piece Alurohr hunting, which have then a ball joint (so'n Stuss then again, there's at FOKO), is good.
A microphone holder, I would prefer to put the accessory shoe.
Reply ruessel:
Wolfgang or moves out of its source.
http://www.fxsupport.de/18.html (ITV)
The dealer had many questions because of my blog readers contact with me and wanted this same screen rebuilt ready to offer. what has become know is I did not ....
for image
Reply Axel:
@ Wolfgang: Thank you, will be synonymous try, if I manage with the BNC.
@ Dreffects: Landshut is beautiful, especially the old town, my sister lives there. But with the great choice, I would not expect. Internet or Munich.
Reply DReffects:
Wolfgang or moves out of its source. http://www.fxsupport.de/18.html (ITV) The dealer had many questions because of my blog readers contact with me and wanted this same screen rebuilt ready to offer. what has become know is I did not ....
the sache mirko with the holder is in the tat then probably the better solution anyway if not to be used. had with a buddy anyway because we'd joked a few BIFI Rolls durchspannen for zuwischendurch hunger because of the micro-holder never used. then I would next to a nice tube only one type of Y-adapter from a hot shoe two power to my two sets of Sennheiser attach to - who knows there is NEN tipp? :)
because the monitor with battery yes but will gain some weight and so on Steadycam or handheld operation probably no longer viable (^ ^) but would be synonymous with a kind plate assembly between tripod head and camera or obstinate? Hab da mal ein grad Picture attached. So extremely brauch ichs course not - you know how this type of mounting means or where it will share? A pivoting arm would of course be at the customer delüx.
Grüßle,
Daniel
Reply Axel:
because the monitor with battery yes but will gain some weight and so on Steadycam or handheld operation probably no longer viable (^ ^) but would be synonymous with a kind plate assembly between tripod head and camera or obstinate? Hab da mal ein grad Picture attached. So extremely brauch ichs course not - you know how this type of mounting means or where it will share? A pivoting arm would of course be at the customer delüx.
This is called the support rail, I have tried to build it from an old tripod plate and axles from the building with appropriate adjustment rings. But I have a 35mm adapter, without the support of only s.Filtergewinde camera would hang. A synonymous Mattebox he needed, because the screen is sensitive to stray. You need this (yet).
The A1 as a shoulder camera, however, would be with the monitor that is not synonymous bad. Since the monitor is sitting so high, should the camera, however, not even on the shoulder is, but s.ihr opposed. Get an Aluleiste 6 cm wide, 3mm high and would require a tripod screw centered a synonymous with the hole for the Fixierstift. On the side a padded shoulder angle, under the lens at right angles a bicycle grip on the right hand. You can then right s.deine Camera with shoulder press and with the left-hand focus. Private Hobbythek ...
Reply DReffects:
muha sounds bizarre but quite interesting. I would fix the aluminum then with an old tripod plate or simply a screw, right? :)
A1 handheld is pretty lousy anyway, I find the dead weight burden the band professionally and fairly vieeeel the buckle is too far, despite the narrowest setting, therefore, of no bad idea with such a shoulder support.
gibts das synonymous ready to buy?
Reply Axel:
gibts das synonymous ready to buy?
Would not be rewarded. Cost of this construction: about 10 ¬ without additional tripod recording, with about 30 ¬. The Cinevate rail support is in any case not more expensive than a ready shoulder brace, and if you have a bicycle handle drangemodelt get, he is one. You can then namely, a holder for the TFT in this and push rods because it right place, where now the expanded display of the Canon would be. So it would be a real shoulder camera, because you have the rails on the shoulder can. The rods are handy for all sorts of synonymous Krimskrams aufzustecken and wish to move. My advice anyway: you do not purchase too much equipment at once. You will remember what you need and what is not. How much stuff do you want to drag through the area?
Reply DReffects:
hehe as little as possible of course
http://www.cvc.de/index.asp?haupt=http://www.cvc.de/cvc2000/shop/sql/asp/ArtikelDetails_SQL_2.asp?Nummer=6550&Language=D
das sieht geil aus but expensive. I can the A1 as it is currently not using handheld because of problems described. optical kunstruktion should not totally stop after DIYers tim look;)
Reply Axel:
My construct. Weight support: less than 200g. (Attachment)
I noticed, however, that we are the price of her ideas in a different league. Sennheiser Funksets? Edirol recorder cards? Rail Support? May not look like billo?
My opinion on your shoulder restraint: Looks chic from synonymous and helps ensure, for example, at a concert in the absence of a tripod quiet a long time, but it is not practical for the smallest movement, because it is not disconnected from the body. As a shoulder camera offers more control, and eventually it will have a reason that professionals never with such a dish rumstehen sees ...
Reply DReffects:
wooot not bad! I will do it to me in a quiet minute to make time:) my poor bike ^ ^
've now my ~ 3 year old car TFT monitor (MM400) and slightly edited it runs now 5 hours from any of the Canon batteries:) that's what makes her so much! Now I must only install properly solve the cable umlöten and ready:)
| |
