I want me a calculator assembly which is HD compatible. Sliced be with CS 3rd As a system I thought s.win xp pro, because I still have this. Please _not_ mac Discussion!
Hard disks are probably 3 x 250 or synonymous with 16mb cache 320GB. Two are considered raid 0 is used for media files on it to save the current. Otherwise, the project data on external disks. And one for system
Do you think the components fit together? more than ¬ 800 I will not spend. There are also likely for 2 22er Syncmaster Consumer and my tube through which Canopus ADVC 100 is connected.
Best ever thanks for the answer!
Antwort von joachino:
The fact that nowadays everything is OnBoard and only 2 PCI slots disturbs me Gewaltig
Antwort von joachino:
what hast thou synonymous constructive to say? What would be the better alternative?
Please only the contributions of nuzen are synonymous.
Antwort von joachino:
Am I am a dealer mainboard? I'm of the opinion 2 PCI Deckplätze would be too little. From you comes so garnicht
Antwort von Evi:
Have you checked the graphics card is compatible with CS3?
4GB is useless, then 1GB should be always with each cycle of W-XP to be blocked, it costs only time. Buy prefer 2x1 plus 2x0, 5GB, that is 3.0 GB in total.
Antwort von joachino:
Less than 500 GB SATAII should now hardly what construction, perhaps at the price / GB ratio even 750 GB drives.
The disk with the operating system you can throw icybox drives - to be synonymous, where appropriate, to switch to Vista to be able, if so far. Ideal are always 2 operating systems on separate disks - for later times.
Raid 0 is only necessary or useful when you need very fast systems. I would rather go on Raid 5.
And the external disks, I would synonymous in a bundle icybox housing - because it saves the cable clutter. Between the two icyboxes a flat lying cooler purely throw, and well-ists.
Oh yes, if the switch to Vista is a real possibility, would be 4 GB, not bad times - usually 3 GB installed symmetrically. But really hurt my tuts are not synonymous, if 4 are.
If the cut immediately be fully HD capable - then still a rather Blackmagic Intensity (a) provide. For CS3 durhcaus an ideal edition Map - CS3 with graphics cards is very bad in the HD preview, and the intensity has a mistaken output quality in full HD. Attention, the input can not be any PC monitor (50i or 60i).
Antwort von joachino:
Thanks for the answers! So in the JSA, I am still not 100% sure. Compatible with CS3, I have not yet examined. Since last until another card with HDMI was on the list. But I do the next two years not a full HD enabled devices, I have deleted and with the two times DVI wär am satisfied. The Intensity sounds not bad, but then goes beyond the budget.
Covered the Raid 0 straight section of HD at present, because I work with large data.
3 GB of RAM to reduce synonymous makes perfectly sensible. Knew but not too much memory is a problem, but the 512mb is not used simply "ignore" are and are not a barrier!
with the hard times do I have to see. 640GB (2x 320) would be really rich to me, because I always max. Will be cut short.
Did someone else a good tip for a GK up to 100 ¬? as I said, and 2x dvi 512mb of me.
Antwort von Frank B.:
"Anonymous" wrote:
Covered the Raid 0 straight section of HD at present, because I work with large data.
640GB (2x 320) would be really rich to me, because I always max. Will be cut short.
Want to work as uncompressed? In the popular HD formats are the data (rates) is not greater than with DV, HDV to AVCHD in the same and even smaller.
Frank
Antwort von joachino:
Attention, CS3 can not AVCHD without tricks - because only then go on about DVC PRO HD, and since then the files are considerably larger compared with the original.
And remember: you never have too much space, sowas gibts gar nicht! :)
Antwort von Frank B. nicht eingelogt:
"Anonymous" wrote:
Attention, CS3 can not AVCHD without tricks - because only then go on about DVC PRO HD, and since then the files are considerably larger compared with the original.
And remember: you never have too much space, sowas gibts gar nicht! :)
Good, I'm an amateur of Cutter expected, as price target 800 euros. Here would be the ideal zZ HDV format. PS.: It is difficult, among the many "guests" get to find. Who has written what now?
Frank
Antwort von Threatstarter:
naja, so ichhabe hd not yet cut, and thought that since the data are somewhat larger. I'll probably beginning with the JVC GY HD100 cut first and "only" 720p.
Otherwise, come next to the other courses semi JVC HD cameras in asking what it is the way in the rental there.
I Will not synonymous specify particular format, because as I said in the regular camera rental.
with the CS3 and the formats, I will probably again need to employ more accurate if I read it here!
What say ye to the graphics card, or because what can you recommend?
best ever, but thanks for the reply!
Antwort von Threadstarter:
To update a short time as the computer probably will be bought next week: Intel Core 2 Quad Q6600 BOX 95W G0 (4x2400Mhz) S775 2x4MB Stepping G0-189 ¬
MB ASUS P5E sound FW Glan SATA DDR2 PCI-EX (X38) 169.90 ¬
2 x SATA 320GB 7200 16MB SATAII Samsung HD321KJ ¬ 117.80
SATA 250GB 7200 16MB SATAII 7200rpm Samsung HD252KJ ¬ 45.90
DVD-Br LG GSA-H55L + -20x/DL10x/RAM12x IDE LS black bulk 29,90 ¬
Sapphire ATI HD3650 512MB TV 2xDVI Retail ¬ 83.90
CPU Cooler Arctic Cooling Freezer 7 Pro (775) 17.90 ¬
PSU is one of the three: Enermax PRO82 + 425Watt 1x120mm fan be quiet! Straight Power E5-450Watt ATX2.2 Enermax ELT400AWT Liberty 400W with 120mm fan
what do you think? the 400W has the advantage that it "Intelligent Cable Management" has. So do not use cables are disconnected and do not interfere in the housing. which has to be quiet 50Watt more. Remember however that 400 range would be synonymous. The PRO82 as a medium-ding.
Is it what, if 2 GB of memory running at 1066MHz and 1GB on 800? Someone sees a problem with the graphics card in conjunction with Adobe?
Is there still something to be suspended? Assume that soon a SONY HRV A1 angeschaft (in company) with the, I will then turn largely synonymous. Should it not be a problem with the components and CS 3, or?
Antwort von O`Shannon:
"Thread Starter" wrote:
Someone sees a problem with the graphics card in conjunction with Adobe?
On the Adobe Page is a list of graphics cards with the CS3 certification. That you should stop and really synonymous use of those. Whether your on the list, I do not know.
Antwort von Threatstarter:
So the recommended cards are too expensive! Also, I have read elsewhere, which makes it about 2 screens and 5 Effects that have the necessary graphics card to render. I would confuse or something? On the list are about 12 cards all up cost 300 ¬.
I would be only interested in whether someone with a Radeon 3650 has a negative experience, or even more positive. Synonymous or other cards of the series.
PSU is one of the three: Enermax PRO82 + 425Watt 1x120mm fan be quiet! Straight Power E5-450Watt ATX2.2 Enermax ELT400AWT Liberty 400W with 120mm fan
what do you think? the 400W has the advantage that it "Intelligent Cable Management" has. So do not use cables are disconnected and do not interfere in the housing. which has to be quiet 50Watt more. Remember however that 400 range would be synonymous. The PRO82 as a medium-ding.
Is it what, if 2 GB of memory running at 1066MHz and 1GB on 800? Someone sees a problem with the graphics card in conjunction with Adobe?
You can use the RAM to run different frequencies. The 800 is set as a benchmark and look at the brakes from 1066. If you do not manage the Kingstonriegel to over clock the 1066 bring you nothing. When the power supply would I have a 400Watt or 450er not even see. With the mini hard drive you will not be happy in the long term, so you'll buy more later and eats the electricity, especially when turning, even though the plates today, all delays will be up but you need the power. I would not look at 650 watts. You will begin synonymous sometime the CPU to overclock, get the ASUS boards are very suitable and the Q6600 is so much s.aber the required power from the power supply. Take what prefer bigger. Antech has good 850Watt parts. As cooling fans and I would take the greatest of fits into the budget. Not only because of the overclocking, but simply because it is quiet running :-)
Axel, San Jose
Antwort von Threatstarter:
Danke schon mal for responding. I was about to ask googlewith employs power supply and there were just some of the Q6600 at 3GHz with 400-500 watt run. I would rather have a good quality 450watt power supply with than one with 600 and to voltage fluctuations or so. When power supply, I have to actually set about 70 ¬. What would you recommend here because of:
wants to buy things locally and not by post so it is destined to the retailer. and if I buy everything dorz, I get a little discount safely.
With the RAM I have seen. Why is there no 512er with 1066MHz? Should I prefer 4x 1GB @ 1066MHz or anything on 800?
Antwort von darg:
There are of Kingston and Corsair 2x512MB with a set but I have here in the U.S. only found. Unfortunately, the small modules no longer produced but I think tigerdirect.com synonymous supplies to Europe :-) Or check newegg.com times.
With the power I would not really save money. My Antech has cost about $ 120. The voltage fluctuations are more likely to be of no small power and lack of quality. Since you have a graphic card with a little more thump need is here synonymous asked the power supply, especially in terms of times and lines. The graphics card will certainly not only via the PCIe bus. Nichtbenoetigte lines, you can remove are synonymous an advantage because it has a little more space in the cabinet. What do you for a housing? Lueftungsschlitz The more the better. Have a Cooler Master, its drudgery and just back from perforated sheet exists. Big fan make the room quieter. Pay attention to good Festplattenkuehlung. The 7200er are quite warm, especially when six installed in the housing :-) Ever thought about RAID?
Axel, San Jose
Still remember what you can, of course, the 1066er RAM run at 800 but the pearls cast before swine. Your Board may vorallem 1066 and the CPU may be synonymous. Then dear and only 2GB but 1066th Running extremely synonymous.
Again what: your shop in the link has 2x512 as 1066 for 89 Euros!
Antwort von Threatstarter:
thank you, I see now synonymous with 2 x 512th But for the price I could synonymous 4 x 1024 Or will it be a whole again slowed, if not all of win xp is used?
$ 120 would be ok so at the current price ;-) But as I said, if possible would like to buy everything together. According to this Page http://www.computerbase.de/forum/showthread.php?t=215681, a good 500Watt gets rich. But look, if I do not vll something more for a 550-600 will output. This first and only 2GB of RAM to buy more RAM later.
A really good graphics card I need is not necessarily for editing. This is rather in the gamers so that everything revolves around the graphics card.
I will install a total of 3 plates. As it already stands above. 250er for a system and two 320 as a raid 0 So 640 for online media files. offline files come on outside. Think that is synonymous enough!
Gosh, the sale in the UK actually have the little 320er? Over here at Frys and Consorten catch the regular sales only at 500Gig, which is currently the standard plates. With the memory I would lay on me. 4GB will not be used and perform well in some systems to slow down. Something seems to prevent XP he just hide and ignore. Synonymous Remember that your GraKaSpeicher miteinberechnet be in the entire memory. So if you have 4GB onboard, plus 512MB on the GraKa you have a total of 4.5GB, but only 3.5 GB can be used truly of a 32Bitsystem. You have then is a whole gig even more for it, but power moves and still takes time .....
Do not forget Plattenkuehler involved with in the major shopping (the juice out again synonymous). Had times of Seagate Software, the temperatures were read out and it was a jump of approximately 25 to 30 degrees after several hours of work between cooled and uncooled and out on the same plates and the non-structural alterations.
Axel, San Jose
Antwort von Threadstarter:
So, that is, if people still read and facing the same issue is a current standing. I have ordered the following: Intel Core 2 Quad Q6600 BOX 95W G0 (4x2400Mhz) S775 2x4MB G0-Stepping
MB ASUS P5E sound FW Glan SATA DDR2 PCI-EX (X38)
2x SATA 500GB 7200 16MB Samsung HD501LJ
SATA 250GB 7200 16MB SATAII 7200rpm Samsung HD252KJ
DVD-Br LG GSA-H55L + -20x/DL10x/RAM12x IDE LS black bulk
ATI HD2600 Pro 512MB Sapphire TV DVI Lite-Retail
CPU Cooler Arctic Cooling Freezer 7 Pro (775) "
Miditower Cooler Master Elite RC-330 Black
PSU Cooler Master M520 Real Power Pro 520 Watt Modular
2x fan 120x120x25
Keyboard Labtec Ultra Flat Wireless Desktop USB optical
TFT 22 "Samsung 223BW Wide / 5ms / 3000:1 / DVI / black / HDCP
Costs are around ¬ 1070 so I think the next 3 years well equipped! On occasion, there is a second monitor to do so. Keyboard and mouse are fairly cheap, but I will mainly operate anyway with my WACOM pad and shortcuts for even a cheap enough keyboard!
On the weekend everything is built together. The two 500s in RAID 0 and the CPU is at 4x 3.0 Ghz clocked.
Thanks again for answers.
Antwort von darg:
Well then a lot of fun but not forgotten by the temperature CoreTemp read out. The other board manufacturers of tools and associated read only the case temperature but not the core temperature !!!!!
