I've been here a little bit in the forum rumgesehen, but nothing regarding my problem, which is foglendes: I have recently produced a Dazzle DVD recorder brought to our old VHS recordings digitizer. For brief info:
I'm in the technical language not so knowledgeable, so now I just bechreibe what exactly is transferred from the computer to the video device. So: Start of our PC's stop this Dazzle, s.dem then a RCA cable (2 times for left and right audio) and an S-video cable is connected, via go into a scart times, then in our VCR's and in the AV1 connection. The Scart connector is set to "Out" asked.
Now the problem is that we have a video synonymous and an audio signal on the PC, but only the video s / w is. Furthermore, says the program "Pinnacle Studio 10" that it receives no signal, although a bit on the screen is visible. What may be the reason? What can I do?
I would be very grateful to you for any help.
/ peek20a
Antwort von Eva Maier:
If you are synonymous yellow (composite) connector, you take the.
(E
Antwort von fleischregen:
I have unfortunately not. Should I then a RCA cable with 3 connectors pick? So say: One, s.dem a red, a white and a yellow is Male. Sorry for this baby language, but I know it does not stop improving.
Antwort von Eva Maier:
At the plug color is not to fail, an RCA must halt its
/ E
Antwort von fleischregen:
Could the problem perhaps related to the fact that our equipment does not have actual video S-video input or output has and we have a scart plug go?
Antwort von Markus:
When the pins are scart to composite (yellow RCA connector) and S-video evidence twice. Includes a Y / C cable s.einen RCA scart adapter, then, the brightness information continues to composite connection, but the color is meanwhile another way.
If the recorder is not to S-Video switch, then the color will remain unused and the picture appears black and white.