| Educational rotate Beginners need your help ???????
Question of birdies:
März 2007
Hello
My name is Thomas'm 29 years old and had a couple of times since beginner questions.
I would like an educational twist, but unfortunately have no idea of shooting, cutting, pressing DVD or burn can.
I can not now be the biggest s.die quality requirements of the film. (Where the most educational as I know) it should be synonymous but not quite look after amatör.
Since I am now in the forum have had some well-I still have a few questions on various topics and I hope you can help me a bit.
For the Camera: I would be interested in what camera (camcorder) is suitable for some good movies zb. in a workshop to rotate.
I am now less the model but rather whether there was a zb. Camcorder with hard drive, a direct to DVD burning, etc. should be. Vorallem what format it must be able to order the DVD then edit it (cut) to the whole and then print on DVD for you.
How is it then abschliesend s.wenn we finished the movie hatt cut and pressed it to DVD or copy wants.
Which format should the film have?
What is the difference between pressed or copy?
My budget is about EUR 2000 for the equipment, computer ca 2,4 Ghz and 1000 MB Ram with Win XP is available.
Please do not throw technical terms with death, as I said I'm Beginners.
Thank you in advance for your help,
Greetings Thomas
Reply Pianist:
I would like an educational twist, but unfortunately have no idea of shooting, cutting, pressing DVD or burn can.
I can not now be the biggest s.die quality requirements of the film. (Where the most educational as I know) it should be synonymous but not quite look after amatör.
At least in "amatör" just went with me down the blind. I answer as follows:
Hello, I'm Matthias, 34 years old. I would like to see the likes rausnehmen appendicitis because of the ever so tweaks. From surgery, I have no idea, but it does not matter. The majority of operations, of which I have heard, were vermurkst anyway. 2.000 EUR Mir are available, do I get there a suitable operating table for?
And now once more seriously: It could be that you find someone who you like for 2,000 EUR film makes a reasonable, if the time spent within three days of holding. Anything else would be nonsense.
Matthias
Reply shizosen:
Thank you for your answer helps me a lot next.
Reply Pianist:
Thank you for your answer helps me a lot next.
Please be happy. If you have someone from the middle segment will find quality, it might be synonymous, that the person is a whole week to take time. There should be enough to get out what I know so the issue has not.
Matthias
Reply shizosen:
It is really nice people here as you receive. I think I very politely asked a few questions, this is a forum, or as synonymous? If you have fallen from the sky perfectly're then my respect for you all, I'm not sooooo Klug synonymous times and must be "stupid" questions.
Reply AndyZZ:
Well, I can understand it somehow Pianist:
You want to teach other people something, but seem unable to be synonymous only halfway placing of commas and the correct spelling or to master but you're so careless and comfortable, that you be no preference as to whether your text correctly and legible. Both are not good conditions for teaching.
Your text makes the impression that you just wanted to quickly earn a few Euros want. Your educational needs are not perfect, because it is the other so are not synonymous. Also not a good attitude. Thus, you will then have little success synonymous.
Otherwise: Read! Your questions are all answered in the forum.
No DVD camcorder, miniDV is only acceptable for subsequent work. A video program for ¬ 100 usually extends from and provides all important options for DV editing and DVD authoring.
Reply shizosen:
If you like, I do it for you. It depends on where you live. Please give me your coordinates ... (I mean not address and latitude and longitude)
Reply Pianist:
It is really nice people here as you receive. I think I very politely asked a few questions, this is a forum, or as synonymous? If you have fallen from the sky perfectly're then my respect for you all, I'm not sooooo Klug synonymous times and must be "stupid" questions.
Was my reply with something wrong? I have you totally value-free should be noted that self-making in the absence of any previous experience does not work, but that it is better if you have the money available to give someone who knows so and will do that for you. In my view this is the only tip that you really helps.
Matthias
Reply shizosen:
Hi Thomas,
I versuch's times (only) objective:
- As I said before, if you want to edit, is MiniDV tape angesagt
- If you are filming indoors like, the camcorder should be as sensitive to light. The effect, however, clear from the price.
In general, here is a wide-synonymous intent necessary and should be taken into account in the calculation are
- If it's done, a tripod use (in telephoto shots a must). Velbon offers s.rd. 90 Euro useful
- For editing there is a software package such as UleadsMediaStudio (the version 7 is currently in pearl.de for approx. 30 Eur squandered, including photo editing tool), with which you capture (ie, the cattle Deo from camcorder to PC drag ) cut for DVD encoding, 'author' and can burn (in the press can work worth only s.höheren conditions)
Where at first.
Gruss
ph
Reply Norge:
Hello Thomas,
everything my colleagues have written has its reason. One, they have all but forgotten. To make a film habwegs ansehbaren to cut you need practice, practice and practice again. How quickly times the Cam in hand and a bit of filming, then s.den calculator and with iregndeinem Program schnellmal together and cut fertich Istesem. So I think that you do you a bit naive before. Most of you here have responded to film, edit their videos and burn DVD's certainly not just since yesterday and if I see I am now over four years where I deal with DV editing is still not out of the amateur status issued.
I wish you for your project every success but I believe you will experience abdominal landing.
Many greetings!
Norge
Reply nexus1980:
Hallo Norge,
Thanks for your answer.
It may well be that I bit the project considered to be naive, but since I have no experience, I see it a lot easier than it really is. That is why I am here in the forum to hear different opinions.
Of course, it is synonymous a good idea to hire someone, I only have until now not thought about, because I think it was too expensive.
What annoys me is just when some people think you should be on a rumhacken immediately because a couple of commas s.der not correct or some spelling errors in the contribution. I think everyone has his strengths and weaknesses and understands how I see myself every synonymous.
Reply Norge:
Hello Thomas,
times as you like for an approximate number to enter. For 10 minutes of film, you need to get at least 1 hour and good raw material, depending on the skill of the cutter 2 to xx hours cut + Tonzeit. That works but only if you are already a clear idea of what to do afterwards is to come out.
Many greetings!
Norge
Reply nexus1980:
Hello Thomas,
now seems to confirm that you are a fairly sophisticated Project've made - film thematically and technically. With your already quite ordinary budget, I would s.Deiner place as follows:
- A powerful camcorder with accessories such as tripod and wide intent to obtain (eg test C't or Stiftung Warentest http://www.camcorder-test.com/ or advisors)
- A (semi-) professional editing software designed (one entry on the botch-freeware, I would save me)
- To conceive klitzekleine projects and practice (with varying camera angles, lighting conditions, focal length ...)
- Ansehbare videos that intersect with music and commentary, author and burn.
If you do that - at least for a few months ago - dominated, a script for a larger project and try to make this schedule to realize.
Good luck
Gruss
ph
Reply Andreas_Kiel (n.angem.):
Moin,
You say "for example in a workshop": what kind of teaching should be? Woodworking? Cars? Electronics? That would be an essential prerequisite for tips!
Examples anyone?
In an electronics shop are you without extreme closeups probably not enough. So: good performance of the camera in the macro area.
In woodworking, the camera staubempfindlich, at least they must be very well packed. Macro is rather schnurz, but you need a good wide angle, which is not too much recorded.
A good imaging performance synonymous in bad light (by the more light you necessarily improve test) gives the example SonyVX-2000 (it still fits used in the budget) or the successor model synonymous VX-2100 (well above the new limit).
What you mainly need a certain basic knowledge about the topic that you beackerst! You need at least a good trainer, which you like the film thematically and prepares you during the filming s.die hand.
As an editing program for something I would not go above 80 euros, Effects play absolutely no role. Take for example, Pinnacle Studio (version you get 9:43 on ebay sometimes for even single-digit euro amount), because you can synonymous "Picture in Picture" work (inset picture shows the overview, big picture details, which I for some purposes, such as Instructional just for very useful ).
You'll still synonymous many (photos, drawings, diagrams) or synonymous times must show an animation.
Tripod is an absolute constraint. If you are with the camera in a car must creep: as synonymous is a stable unverwackelbare edition absolutely "must"!
soundtrack: You'll barely O-Sound can need (workshops are sometimes very, very loud. So you must afterwards a spokesman for the text. Since you need a good Micro for voice recordings and someone who with a pleasant voice the text to match the recordings on tape talking about. This is harder than it reads: the scene in time length must be synonymous to the spoken text fit (ie you need a lot more material than later in the finished film to be seen), the text must be technically suitable.
You need patience, a lot: and what are those who say "learn once with a camcorder presentable deal", let das
Once you have the hardware: try once a 5-minute wrinkles on napkins or the forms of an ashtray from plasticine than teaching such a way that the audience at the latest after the second show has savvy. Something simply stop what you own as a one-man show can realize. With text! And then do you here from time to time ...
So, that was everything to me in a nutshell einfiel. If I'll even be so smart that I know everything, then do I get a teaching "as one turns Instructional" :-))))
BG
Andreas
Reply PowerMac:
Not a bad teaching of people who have knowledge unpädagogisch "mediate" want. Apart from the technical, lacking basics such as teaching methodology, techniques, etc. and cinematic and editorial know-how. This is about a professional and educational for people who will watch him. It can be so much wrong! Release the experts. And by that I mean not just any master.
| |
