| Hum s.Ende the scene
Question of Carsten71:
Januar 2008
Hello,
I have the following problem with my NV GS 80:
It is very common that s.Ende a scene, so if I have to pause recording or press the device off by a loud crackling in the sound created. So I am forced to s.Ende various scenes a few milliseconds to remove. The disorder is when playing in the device, both the transferred film on the PC to listen. Is this normal or is there something wrong?
Greeting
Carsten
Reply Markus73:
Is this normal or is there something wrong?
When the tape was moved in between (out-and herspulen, Studio View), then this is for all Panasonic camcorders so, with whom I have worked so far, which will probably normal.
If I only record press pause, then next record etc, I have not noticed noise.
Regards,
Markus
Reply hmGast:
exactly ... it can / could I do for my GS500 synonymous confirm.
Since I generally only once every tape recording complete with attached cap and then leave through the top coil back, I believe that the crackling does not occur synonymous if I then briefly back and then forward again.
Regards
Herbert
Reply Carsten71:
First of all thank you for the answers.
Document times to make sure whether I might not but at the affected agencies have spooled. Today I have a few test, but the interference could not reproduce.
Greeting
Carsten
Reply kurt95:
exactly ... it can / could I do for my GS500 synonymous confirm.
Since I generally only once every tape recording complete with attached cap and then leave through the top coil back, I believe that the crackling does not occur synonymous if I then briefly back and then forward again.
Regards
Herbert
Well great camera, doubles the wear the same times so that crack-free sound gets. I must also go, ne buy Panasonic.
Reply Markus73:
Well great camera, doubles the wear the same times so that crack-free sound gets. I must also go, ne buy Panasonic.
Alternative Tip: Only just read again and understand what was written!
Regards,
Markus
Reply Maik:
Alternative Tip: Only just read again and understand what was written!
He has just read.
What Herbert says is yes s.der one or another body as synonymous
'Tip', where holes to time code on the tape should be avoided.
Better, however, while the tape in the camcorder, the finger
Of the roundworms and playback buttons and leave only when the
tape is full to view, rewind, etc.
Just as above indeed produces the double
Duration for each tape, which is the life of the head times
also halved.
M.
Reply thos-berlin:
Time code when capturing holes can arise if the tape and re-threaded Ausgefädelt (removable cartridges) or if you look at the scenes after the recording and then watch s.Recorder "too late" in the recording mode. When using the pause button should not happen.
You need the tape is not necessarily entirely vorcodieren so that a continuous time code on the tape is. It is synonymous, after recording the scene for another 10 seconds to run. Then you have enough "space" to after watching the scene again in host mode. BTW you should synonymous s.Bandanfang a few seconds without a major record content, as some programs cut while reading a "Prerol" which is a lead-time required.
Reply Markus73:
He has just read.
What Herbert says is yes s.der one or another body as synonymous
'Tip', where holes to time code on the tape should be avoided.
Already, however, it is not necessary to the problem to be avoided. Who - as you write - the inserted tape is simply at rest, neither has mentioned the sound problems have an increased wear. That said I do.
Gruß,
Markus
Reply hmGast:
Time code when capturing holes can arise if the tape and re-threaded Ausgefädelt (removable cartridges)
... precisely because I see the problem, at least for me. I do more test shots, which makes the 10-15 min. The tape is then placed in a separate Mini-DV Rewinder rewound back into the camera via firewire and used to play on the PC. The subsequent test images are then partly in connection to, sometimes the tape but synonymous in the Rewinder again completely rewound.
That is why for me the complete safety always precoding.
Regards
Herbert
| |
