Hello, ) by some (probably your own stupid Herumgeklicke, I can suddenly emit no movies / sequences more on the camera (canon xm1/sony hdr 1000). The cam can be controlled to be effective but the movie / sequence appears in the right control monitor on the Calculator (otherwise there is still a work or to see something like that too.) In Cam Monitor Unfortunately, only the blue picture. Hat jemand ne Idee? Ne simple matter of adjustment is determined. Thanks for the help.
Gruss, Holger.
Antwort von Blackeagle123:
In Premiere, you click on "Export - on tape". The camera must then be switched to record mode. You can adjust the menu for Canon, though you in AV or AV-out choose. (Whether there is an automatic feature that I just do not know!) Since You just have to look at the times AV options!
Have you selected AV-in, recognizes the camcorder in record mode, to receive a picture. Pressures for the computer to "play". The Picture, which gets the camera you will draw next to normal, by clicking on "record" press. Start With spending on the tape, I recommend a movie trailer (1 minute, 30 seconds color bars, black 20 seconds, then count down of 10, then at the small camcorders at 00:01:00:00!) So you can more easily on the camera And after spending again simply record on the PC.
Many greetings!
Antwort von Johannes:
Which program do you use? Have you ever looked if the camera still takes up the PC, so if only the display is sometimes more or less wrong?
Antwort von elephant110:
The camera must then be switched to record mode. You start with the small camcorders at 00:01:00:00!) How simple can you spend on the camera and start again afterwards just to the PC.
Hello, ok. I'll try it and see. sign me later. grad got to do. schonmal thank you. gruss.
