Hey! I've been looking for months for a solution to miene problem Now I have finally decided me posen time heir to the forum after looking for here, unfortunately, synonymous gebrahct nix: (
So:
Windows XP, Neuster grains of nvideo (GeForce FX 5200), TVTool available, and one of Grundig Television Sedance.
I've already tried everything, but nothing happens, no Picture! None at all! : (
What do you use a scart adapter? namely, the gibts in different versions for input and output (it is synonymous) what to switch. Maybe you have the wrong one.
Antwort von steveb:
You sure as an S-video (synonymous schonmal as S-VHS plug to be named), use it, must be synonymous, that your Television synonymous an S-video input s.Scart-times is available. For most of them recognize that one can choose to activate the settings menus of the TV or s-video. Look in the instructions if he s-video support.
Antwort von Markus:
Hello,
do you mean with "Television is always blue!" that no matter Picture or Picture that shows only the blue color component? - For the latter, I would have spontaneously no explanation, especially since the Stillimage with the port reveals s.Computer not really anything.
PS: How about with Flash rather than with long exposure time and shake? Macro do not forget your attitude!
Antwort von medi999:
Thank you for your responses! :)
"Volker" wrote:
What do you use a scart adapter? namely, the gibts in different versions for input and output (it is synonymous) what to switch. Maybe you have the wrong one.
Here I'm fly about 2 times. Aberweder with the one nor the other with what works ... At the 2nd Female stands on the thing "input engraved. zum Bild
steveb "wrote:
You sure as an S-video (synonymous schonmal as S-VHS plug to be named), use it, must be synonymous, that your Television synonymous an S-video input s.Scart-times is available. For most of them recognize that one can choose to activate the settings menus of the TV or s-video. Look in the instructions if he s-video support.
So, my television supports it. Here are the dates:) zum Bild
"Mark" wrote:
Hello,
do you mean with "Television is always blue!" that no matter Picture or Picture that shows only the blue color component? - For the latter, I would have spontaneously no explanation, especially since the Stillimage with the port reveals s.Computer not really anything.
There is no Picture. From and to distort the picture, but it still remains only a deep blue: (
So for s.Television the scart adapter with the imprint would be "input" has the right times. How does it look with your graphics settings. Normally, as synonymous of the S-video output to be activated, or as a 2nd Monitor the TV output, or something like that (I'm not Gforce, the menus do not know why that is) but in principle similar for most cards.
Antwort von prem:
"Volker" wrote:
So for s.Television the scart adapter with the imprint would be "input" has the right times. How does it look with your graphics settings. Normally, as synonymous of the S-video output to be activated, or as a 2nd Monitor the TV output, or something like that (I'm not Gforce, the menus do not know why that is) but in principle similar for most cards.
The Television stands here as the 2nd Monitor.
However, I can not select a connection type ... Could it be that the television is not recognized? : (
If no picture is that it may be synonymous as has already mentioned the television is not recognized by the drivers of the graphics card because the impedance change by using hinhaut s.TV out not quite. (The TV Manufacturer disbezügliche the NORM not quite) einhällt For Nvidia cards like yours there is something about this in the driver menu, select "Force TV detection of hidden device" (force TV detection at the bottom):
Antwort von Markus:
"Volker" wrote:
So for s.Television the scart adapter with the imprint would be "input" has the right times.
I have to disagree. In one Scart input, go into AV signals, but they come out of only one output. - The tricky though is the fact that some of Manufacturers, the term does not refer as usual to the scart side but on the RCA website. Thus it will be difficult to buy the correct adapter. My advice to take: The best a switchable scart-RCA adapter, because with one of the two switch positions in any case, one has the right connection. ;-)
If no picture is that it may be synonymous as has already mentioned the television is not recognized by the drivers of the graphics card because the impedance change by using hinhaut s.TV out not quite. (The TV Manufacturer disbezügliche the NORM not quite) einhällt For Nvidia cards like yours there is something about this in the driver menu, select "Force TV detection of hidden device" (force TV detection at the bottom): siehe
The two monitors (Angeklick the TV device) zum Bild
"Mark" wrote:
I have to disagree. In one Scart input, go into AV signals, but they come out of only one output. - The tricky though is the fact that some of Manufacturers, the term does not refer as usual to the scart side but on the RCA website. Thus it will be difficult to buy the correct adapter. My advice to take: The best a switchable scart-RCA adapter, because with one of the two switch positions in any case, one has the right connection. ;-)
I have here two Capacitor. Once the output and an input. Only with the two non funkioerniert: ((
Antwort von DjDino (Toth Dominik):
"medi999" wrote:
Hey! Windows XP, Neuster grains of nvideo (GeForce FX 5200), TVTool available, and one of Grundig Television Sedance. [/ b]
I've heard that TVTool can cause problems because it pretty deep in the registry rumpfuscht TV-out settings, which may be with the drivers the card is not always a good bear with, it can be synonymous by normal driver menu nothing s.TV-out -- funktionieren.TV activation tool must synonymous to the TV chip support on the card: # http://tvtool.info/go.htm?http://tvtool.info/german/faq_hardware_d.htm hardware3 - as in "What TV Of TVTool chips are supported? "You can schaun times whether the case has ist.Hier synonymous but someone is having problems with TVTool and a FX5200: http://tvtool.info/forum/viewtopic.php?t=1273&sid=f9908a4442d15b7c78064707bc20f61a -- apparently incompatible.
As a solution to uninstall TVTool Registry simply botch the TV Tool and then the video card driver (Forceware) via System Preferences-> Software also uninstall (PC rebooting) and then install the card ... so that their default settings are reset. May well be the hinhaut happen with you again.
On your screens I noticed anything unusual / wrong. The S-video cable on your Picture synonymous seems in order. However, I can see that you have a composite (CVBS) to S-Video adapter use before it goes in to the scart, but it should be no problem to stop is only slightly worse quality than a pure S-Video.
Antwort von DjDino (Toth Dominik):
One thing occurs to me still: The Composite> SVideo adapter, it can not be the automatic disbezügliche the driver setting funktioniert.Schau times under nView Display Settings-> Mausrechtsklick auf den TV-Screen->TV-Format wählen->ganz unten im Menü auf "erweitert"-> Video Ausgangsformat.Dort manual einstellen : see If this were not true, there are no synonymous Picture.
The link helps ensure synonymous: http://www.computerbase.de/forum/showthread.php?t=213195
Antwort von medi999:
sry: (
I've done everything as it was in the manual. Got it now synonymous stand on mixed output, but still blue window viewing.
However, any signal must arrive s.fernseher, because the blue building the entire time-out and her twitching ...
Antwort von DjDino (Toth Dominik):
Genuine persistent problem ;-)
Have you already uninstalled the synonymous TVTool and reinstalled the video card driver? (because of above erwehnten TVTool registry problem) Is the video card driver is an official or beta? On this occasion, you can prepare that same time synonymous to a current-official aktuallisieren to exclude bugs due to bad / old drivers.
Antwort von DjDino:
Is something else occurred to me what is synonymous here:
http://www.herja.de/tut/tvfern.htm
Quote: "If your graphics card does not have a conventional video - or S-video output features, but via a non-standard port, it can be a special ATI or Nvidia solution. In this case, you need only the special adapter connect the with the graphics card or the computer was delivered. "
When are you accidentally use the wrong adapter (of) another card, although the mechanical fit but the pinout is different because it can be synonymous - also> no picture.
But if it is a normal 4-pin S-video output that is (looks to me) rather forget the posting again because they are the same in all of the pinout.
Antwort von Monsta:
"DjDino ()" wrote:
Genuine persistent problem ;-)
Have you already uninstalled the synonymous TVTool and reinstalled the video card driver? (because of above erwehnten TVTool registry problem) Is the video card driver is an official or beta? On this occasion, you can prepare that same time synonymous to a current-official aktuallisieren to exclude bugs due to bad / old drivers.
TV Tool desinstalliert I had, then downloaded the nvidia drivers installed, and restarted. So it is not well
The adapter needs to pass because of was this nvida / or AOpen, with the included graphics card: S
Antwort von DjDino:
What is going on with you there ... maybe the cable is simply broken? Television or not in order, try it once at a different time and take a different cable.
