1) To create a continuous time code aud to produce the tape, is often recommended that the black tape, ie, with lens cap attached to discs. It takes me about 1hr. Is it synonymous effective, shorter methods? 2) I've read that the tape before the start of the recordings at least 20 seconds will play black. Why?
Antwort von thos-berlin:
To 1) No.. That is not a tape recording is always done in the original time, synonymous only if one wishes black.
Since this is a oblique track record that would result in faster speed, the angle between band edge and track data is no longer correct. You should only use the video head swiveled make.
to 2) I think there are USDI following two reasons:
- 1 Is the band at the beginning of more frequent use of mechanical load and thus the danger of tape errors and associated recording and playback errors larger. This should, however, only with frequent use of the same band felt. In addition, threading through the belt especially from the Video directly s.Beginn band Bandzug still not optimal can be.
- 2 Some NLE editing systems need a Preroll (forward) to give them the input tape drive can accurately points. If for example a Nachdigitalisieren based on actual time code is needed and the desired band is located directly s.Anfang, then there is no usable Preroll for the area in front of the band office. The system can not run and thus is not directly synonymous of capture there.
