| WHO CAN HELP ??????
Question of Scharfes Auge:
Dezember 2006
Hello,
canovision s.hi have an 8mm video camcorder,
now my problem.
mechanik is fully in order.
elektronik not.
it must, according to workshop the capacitors to be changed. given me the repair of the workshop is too high, I look at this way a solution.
invalitenrentner because I'm big, I can not make money with jumps. I depended very s.diesem device.
Is there a way ????????
I would be responding to a posetive look.
gruß Rüdiger
Reply PowerMac:
And what do you want now?
Should we check the electrolytic capacitors work magic?
Reply david.fejzuli:
but hello,
with the magic would not be bad.
I'm looking for someone to fix something or can change.
and who may be something to report.
gruß Rüdiger
Reply PowerMac:
There you are with its ad in his or bulky gear to local television dealers better off. Concerns the technical documentation and try it with his dear friend.
Reply nightworker:
".... I depended very s.diesem device. "
Imagine times before, this device would you fremdgehende your wife.
For absurd requests forum and is not synonymous God has no jurisdiction
Reply Maik:
Hello,
canovision s.hi have an 8mm video camcorder,
Moin.
The quiet death of electronic devices of the 80s and early 90s ...
The workshop has been right with the assumption it could be deaf capacitors
be, however, makes the problem any easier.
The electrolytic capacitors that are small components on the board, cost only a few cents,
but they are with the times' deaf '(ie they lose their electrical properties)
and thus lead to different creeping faults.
So far so good.
An Elko synonymous but is a standard component of electrical circuits.
In addition to transistors, resistors and ICs, I would say have
Capacitors a share of 20% s.einer circuit ...
Now the question is: how many electrolytic capacitors, the camera then?
20, 30, 50, 100?
You can do this by a bit, when only the electrolytic capacitors replaced,
sit on the boards with the errors have to do ...
If the Viewfinder flickers, then one does not replace the electrolytic capacitors of the drive
etcetc,
but that search is an error
s.extrem costly
b) without technical documentation and gauges difficult to make
c) time
Then there are errors that only after proper warming of the device
occur (5 min after switching, 10 minutes after turning) ...
Very hard to find,
then there are two different types of capacitors: normal print run
and SMD, the latter set in SMD soldering Lötkenntnisse with magnifying glass and fine lace,
as well as extremely quiet ahead of hands,
the camera must be totally dismantled, all (relevant) capacitors exchanged
with all the difficulties described above ...
Time: x to infinity.
If it is not easy s.technischen minor fails.
And a guarantee that the whole device after the conversion action and Rumlöterei
still does not exist anyway.
My advice: Ebay, search canovision ...
Or a freak find exactly the s.der Cam ever made
and bright eyes at the thought s.die work gets ...
For Money is not reasonable to make.
Sorry,
M.
| |
