Frage von hanshopfen:
Hello! \u003cbr /\u003e\u003cbr /\u003e I would like at a concert of a band set up two cameras and static wear over mixed live with a PowerPoint on a screen. Last year I solved it as follows: \u003cbr /\u003e\u003cbr /\u003e 3 cameras were focused on certain registers and by remote control adjusted (eg, for zoom). Of the cameras I went with regular RCA audio cables to a video mixer (Panasonic WJ-AVE5). Synonymous went relatively well, because all the cameras were only about 10 meters away from the video mixer. Additionally was a laptop with a PowerPoint presentation was used. I connected the laptop via S-Video video mixer a.Fully engage in and change the camera always off or relocated. Unfortunately, in the PowerPoint total quality loss. From the video mixer then went on an XLR microphone cable with XLR adapters ofRCA zumBeamer. And by the way I still have to play with the band, and this year I want to simplify it a bit in the future. \u003cbr /\u003e\u003cbr /\u003e Here's what I imagine: \u003cbr /\u003e\u003cbr /\u003e 2 cameras are behind the audience to about 3 meters high light stand. A camera is focused on the entire chapel, and a second camera has a fixed set zoom. This camera is synonymous to the left and right by remote control to be moved. Of these two cameras, I want this year with about 50-80 meters \u003ca href=\/> How do I get the PowerPoint but additionally without much quality loss denBeamer? \u003cbr /\u003e\u003cbr /\u003e My solution: \u003cbr /\u003e\u003cbr /\u003e Directly with the video and VGA in denBeamer mixer via RG59 cable from the video mixer synonymous in denBeamer and then switch a.Beamer between the input signals. This will however depend more derBeamer newly arriving because yes 2 different sized input signals. Moreover, the message is always shown on input. \u003cbr /\u003e\u003cbr /\u003e I thought synonymous nor the fact that you maybe the video mixer a.Laptop connects here and then switch between PowerPoint and video input. \u003cbr /\u003e\u003cbr /\u003e My solution paths are awkward to me personally but (as always with remote control must be switched) and do not act very professionally, if ever see the message of the current input and
 |
Antwort von carstenkurz:
For little money is not so easy to solve clean. What's going on, if necessary, depends on the specific use of synonymous circuits between live and Power Point. \u003cbr /\u003e\u003cbr /\u003e\u003cbr /\u003e If the mixer individually owned? \u003cbr /\u003e\u003cbr /\u003e\u003cbr /\u003e What are these cameras for, and what einBeamer for? \u003cbr /\u003e\u003cbr /\u003e\u003cbr /\u003e - Carsten
Antwort von hanshopfen:
\u003chtml\u003e Hello, \u003cbr /\u003e\u003cbr /\u003e Blender's own property. \u003cbr /\u003e\u003cbr /\u003e I use the camera again of a friend (a Canon) and I'll buy myself a camera now. Most likely dieCanonLegria RF M41 or a Panasonic in this price range. \u003cbr /\u003e Last year, I used two old Sony cameras (DCR-TVR330E) and dieCanonvom friend. \u003cbr /\u003e\u003cbr /\u003e Unfortunately, I do not know exactly which video projector, it is because it is mounted in the auditorium. But I know that there is quite a big of Sanyo. Has understood all the connection possibilities. Looks like the
Antwort von carstenkurz:
If operationally a clean separation between live image and PowerPoint is possible (eg in the slideshow pause), then I would connect the computer separately a.denBeamer. Most of the better beamer allow it to turn off the status of the source of alternating overlays - you get to check out the exact type designation of the beamer and on this basis once the manual that you find all the net for download. \u003cbr /\u003e\u003cbr /\u003e\u003cbr /\u003e If it still will go over the mixer: \u003cbr /\u003e The quality of the S-a.Fully engage Videoausgaenge most notebooks is not great. \u003cbr /\u003e But you can certainly improve when the S-video output as secondaries (2) define and monitor output for PAL operates with a custom resolution, ideally, you put the PowerPoint presentation then synonymous already adapted to a
Antwort von Eastside:
You try here an analog signal Fbas with a much lower resolution from the laptop to send out a.denBeamer. This is Mork. \u003cbr /\u003e\u003cbr /\u003e This may look bad. \u003cbr /\u003e\u003cbr /\u003e Analog Fbas has only ne resolution of ca.720x576 pixels. \u003cbr /\u003e\u003cbr /\u003e The cable has to do not so much. About RG59 you can synonymous SDI or HD-SDI with the carry over is worlds better.
Antwort von Eastside:
Carsten has described it great.
