Frage von Zizi:
Hello people!
Have today a 43-52mm Adapter Ring of hama screwed on my HV30 and it does not get more down ..
I habs with oil, heat, violent, rubber gloves, etc. already tried.
How do you get back down because?
I've really no more nervous and my hand is swollen ...
Is there a possibility the überhaupt nich runterzu get?
have specialized as special tools?
Thanks in advance!
Antwort von sanvodan:
Oil, the poor HV30!
Antwort von Reimer Reimer:
Hi Zizi,
Violence? O that is not good.
Oil? How where Why?
Heat and rubber gloves?
Nee ...
Fortunately, the adapter ring so the advantage that one pretty good grip
find out ... with dry hands.
When heat spread easily from the materials ... Heat is not
that which you offered the adapter ring can be tested.
The lens mount on the other hand, would be delighted heat, which expands
slightly and perhaps get the adapter ring game enough ...
Take s.besten once the rubber glove and fill it a little
with ice, hit the cold pack evenly on top of the ring and socket
summarizes the Camera with your warm hand closed below the
Adapter Ring.
And then pray force ...
All the best Axel
Antwort von Zizi:
I have a few drops of sunflower oil on the ring, where ... (bad?)
Incidentally I have the camera in front in the sun which warms the adapter and rotated with his rubber glove so that I can hold off!
So I should make the ring cold and warm the camera?
Can rotate through hard deffekt what will?
Meanwhile, I have swollen hands from turning red ...
I hope there are no bad signs for the camera? ;-)
Antwort von sanvodan:
Now take the thing and walk into the photo dealers. The have hundreds of these Scheißdingern off and know how much violence is needed.
Of course you have the Cam purchased via the Internet. Will the dealer look. Tip about this: you put in front of the tapes a few questions in the shopping basket, the more times you need.
Antwort von sanvodan:
I have a few drops of sunflower oil on the ring, where ... (bad?) You want the part because fry? LOL
Incidentally I have the camera in front in the sun which warms the adapter Two possibilities exist:
The adapter is screwed
into it (as usual) has to get cold, not heat!
The adapter is screwed
on (rather unusual): the heat must be getting, not cold!
Antwort von Zizi:
yes I will do .. 've just ring and the cool thing is still not starting!
I never really backs .. my hands look as if I had the whole day coal geschaufelt!
werds before I leave now instead of a professional deal with a disposal specialists must visit!
Antwort von sanvodan:
I've always been a sort of pincer made with great sensitivity and rotated.
Antwort von Reimer Reimer:
Hi Zizi,
as strong as your hands?
And you have always rotated the correct direction?
(I know people who are still confused ...)
Go into a big photo shop, say that you have the gift Camera
have won, and now you the embarrassment of what it is ... maybe
enough already one of the stronger hands.
Another experiment with the cold and heat: Stopper times in the Camera
a couple of warm socks or the like, only the adapter ring remains free.
Then into the freezer durchkühlen leave, (Camera is naturally in the cold
there off). Remove. Lens mount heating, there
cold hands, and then rotate vigorously.
(There's naturally no guarantee for these tips, but I would be
make.)
All the best Axel
Antwort von Zizi:
Well I'm no Hulk but powerful enough for lenses unscrew hab ich!
I'm not the only synonymous of the samples would have!
It seems like draufgeschweißt ... what really makes the photo dealer `?
Has a Mister Universe as angestelten or because there are machines to help him `? otherwise the synonymous since not much moving.
Antwort von Reimer Reimer:
Hi Zizi,
Take another look upward, I did my part
added: Keyword freezer.
You've obviously right, which often happens. When I get mother -
Me, I always prefixed jam jars, they do not aufbekom -
men, although a forceps opening jam jars are used, which
indeed provides a good leverage. So far, I have all the glasses with the
aufbekommen bare hands.
Perhaps you have a yes jam jars opening pliers ...
All the best Axel
Antwort von Zizi:
because I've already thought synonymous .. even wanted to buy an extra drive but where? (ikea)
Well in a marmalade jar helps so often been a knock back s.der or cold water .. that falls in the Cam schonmal away.
I've already considered the real camera by turning the crackdown has hurt away.
So my hand is really in the ass .. I do not believe that under "normal" turn it down yet.
What is the photo dealer do?
gibts da special equipment for this?
Antwort von sanvodan:
For filter which s.Lens "firmly bitten" have there special filter pliers. The problem is mean that if you tried your hand with the filter abzudrehen is the only force on 2 jobs and distributed from the round filter will be a little oval will appreciably. The more force deployed the more deformed it to the Oval, so much does not always help a lot ;-)
Since it is an adapter ring, you can act, perhaps the ring (with the help of a 2nd person) with 2 pipe tongs s.dem over the edge and try to use the camera to rotate. So you prevent the forces which the ring to the Oval squeeze.
LG,
Daniel
Antwort von mcbird:
That part is correct "filter clamp" and looks like ...
http://www.amazon.de/Hama-Filterklemme-f% C3% BCr-Filters-46/dp/B00006IVMT/ref = sr_1_1? ie = UTF8 & s = ce-de & qid = 1210448664 & sr = 8-1
LG,
Daniel
Antwort von Reimer Reimer:
There are synonymous Allzwecköffner.
But my mother has a practical Schraubdeckelzange the round
accesses, (unfortunately, my mother turns Schmacke in love with the wrong
Direction).
With these words, they can be easily ergugeln.
All the best Axel
Antwort von ef.multimedia:
You have the adapter probably slanted draufgeschraubt. Since you can rotate as much as you want, only thing that could possibly happen schrottige Schraubfassung s.Lens. Prefer to go to the photo dealer. If the camera is broken they must pay.
Antwort von mcbird:
There are synonymous Allzwecköffner.
But my mother has a practical Schraubdeckelzange the round
accesses, (unfortunately, my mother turns Schmacke in love with the wrong
Opening).
With these words, they can be easily ergugeln.
All the best Axel Caution! The Schraubdeckelzangen access only S.2 bodies and distribute the power as the filter is not terminal, which is only around the filter "turns" and thus the strength and evenly distributed.
LG,
Daniel
Antwort von sanvodan:
..
Since it is an adapter ring, you can act, perhaps the ring (with the help of a 2nd person) with 2 pipe tongs s.dem over the edge and try to use the camera to rotate. So you prevent the forces which the ring to the Oval squeeze.
LG,
Daniel Stop tube with pliers or similar. I have an HV30 and synonymous a 52 => 43 of Soligor adapter. Until now, I have no problems with it.
I did so but times s.einem flash 580 EX on the small tripod fixed sat. The thing was so bomb finds that he is nothing left off. Only an acquaintance, the thing with a special tool. As had already Blitzfuß scratches of my experiments with the pipe wrench. Let s.besten the service ran, with above-mentioned special tools.
Antwort von mcbird:
.. Stop tube with pliers or similar. I have an HV30 and synonymous a 52 => 43 of Soligor adapter. Until now, I have no problems with it. The pipe wrench should not be the ring but the ring only s.Rand, ie transverse to draw circle, so that no forces on the ring shape effect.
That the 9-12 ¬ adapter is getting a scratch you can stop in to buy.
LG,
Daniel
Antwort von Zizi:
.. oK 'll wait until Monday!
Dan gehts s.zu a dealer.
White a ZBS. NEN good in Vienna of what I can do?
Still have no plan where I go.
Antwort von derchiller:
Sobotka.at
Eusere Mariahilferstr.
Antwort von Reimer Reimer:
Monday -
Tuesday would have more chance of success ...
All the best Axel
Antwort von Zizi:
not quite understand ..
Why Tuesday?
Antwort von Reimer Reimer:
Now I know not how it is in Vienna, but Monday could be the
Shop closed.
All the best Axel
Antwort von powermac_CLONE:
Saw
Antwort von Erich:
Hello!
There is a simple and reliable method of sessile filter back safely to be solved:
Filter with one, preferably elastic, laces once entwine, just with two fingers and take off.
The force is distributed over the whole ring.
With me so far has always helped.
A clean shoelaces belongs in any camera bag.
Good luck!
Erich
Antwort von Reimer Reimer:
Yes, this could work. This is the same principle as the
Allzwecköffnern, with a handle and a rubber band
exist. In the case where it is recommended that it arg fixed lids
with a jerk to try.
All the best Axel
Antwort von Zizi:
That with the laces, I do not quite understand ...
I should wrap around the ring pull and rotate Stram?
So I habs with a thick rubber band probiert .. but probably better off, but has used synonymous nix.
Thanks again s.alle I give such good tips!
You are really great .. but unfortunately has not used, but will probably have to wait till tuesday!
Antwort von Erich:
Hello!
With the rubber band is probably not. The force is to stretch the rubber used, not to solve.
Senkel external to the filter adapter. The two fingers fix Senkel s.der the right place, provide the necessary voltage for the adhesion. One must draw very close s.Filters.
It is simple.
Greetings!
Erich
Antwort von Reimer Reimer:
Hi Zizi,
it has a happy ending, where?
All the best Axel
Antwort von Zizi:
yes .. The Photo Shop swobotka or whatever his name is synonymous not brought him down!
well now I have it with a pliers brought down ;-)!
However, the adapter is now in the ass.
But you learn it .. never turn up again ..
