Frage von juemue:
Hello,
I own a 35 watt video light for Sony-standard-6-Volt Batteries
(Still image from Battery Type:
Antwort von Stefan:
No wonder ... 35W s.6V is fierce.
You could imagine a old Battery designed and slaughter. Or to see whether there is a pallet with adapters for power supply of the camera there.
Thus you have the right base. There you can go on the cable (coiled cable?) Akkugurt to solder on, affix and a relief.
At slaughter (Dremel?) On the inner life care. When you lead a sealed, leak-proof type, otherwise you stand as soon bauchfrei ;-)
Good luck
The thick Stefan
Antwort von juemue:
hallo stefan,
I have an old NiCd Battery, which is no longer funzt eh. You mean, then, for example, the Battery aufsägen and s.die inside of the contacts to solder the cables on it? Have no idea just how the inner workings of such Batteries looks to me that not since the opening, for example acid entgegenspritzt ...
What do you mean actually with "relief"? (I'm not a technician ...)
Antwort von robbie:
Hi!
there remain synonymous larger 6V Batteries ... I can remember that in this example, blinking baulaternen on the road are inside ;)...
or you look at conrad, because they certainly have a large selection s.6V batteries.
Of those schal you then a few parallel, so you get more power (not voltage!)
a longer cable, maybe even 4-pin xlr - plugs, and ready ..
as a tip, if you really xlr 4-pole, then take the pole 2 and 3, and not 1 and 4 .. if you times a 12V system with this plug hast;) ..
schöne grüße!
robbie
Antwort von Stefan:
The Battery are several small, sealed batteries housed. You may disconnect at the bottom are not cut so deeply that they Batteries damaged. So careful and more of a hand saw with an electric saw.
Through a relief when a train s.Kabel the force transmitted to the casing and not soldered to the wires so that the solder joint is not abreisst. Is it possible to make different kinds.
For example, if you have the floor as a small box with a little edge saw off the cable soldered to the rest of the cable in the box in loops embarrassed and then - after checking the function - mechanically stable and protected from moisture with 2K-Epoxy or hot glue vergiesst.
Good luck
The thick Stefan
