Infoseite // Apple and Panasonic NV-GS60



Frage von Orsen:


Hello,
I have a few days before the "Panasonic NV-GS60" bought and now wishes to help with the videos of "i movie hd" to play on the mac. but unfortunately my macbook recognize the Panasonic NV-GS60 does not. I saw it on firewire cable and USB cable probiert but unfortunately without success.
I hope one of you can help me with this problem.
gruß Orsen

Space


Antwort von urban-orange:

iMovie recognizes everything! That you can calmly think. Of course, only if your Firewire and Cam in VTR / VCR mode .. If you're not have built-in iSight (the things I go to the cookie, and you can not switch off, you feel like BigBrother, my tip: patch it!), But you need to select the firewire Cam.
If this fails, I would firstly another firewire cable to try (may be broken). Worse would be this.

Space


Antwort von orsen:

thank you for your tip.
klapt but unfortunately it still does not and the cable and the firewire s.mac are orderly.
maybe someone still has a hint for me?

Space


Antwort von Markus:

Hello Orsen,

there are only three possible causes, it could s.denen (two of them had "guest" as already mentioned):

1. The Firewire cable is defective or has a poor or no contact. Try a different times, possibly a value.

2. The connector of your DV camcorder is broken, eg due to an electrostatic discharge. Whether this is true, you can find out by typing your camcorder times s.einen other computer connects.

3. The Firewire interface s.Mac is defective. You can test this by typing times another camcorder or other firewire device connected s.Deinen computer.

Space


Antwort von PowerMac:

Already a different program (Quicktime, Avid Free DV, etc.) tried?

Space


Antwort von Orsen:

hallo leute,
the panasonic has been synonymous of a Windows machine can not erkannt.also it just be that the machine has broken. s.kabel because it can not synonymous, since I use the cable with another camera successfully used.
is quite annoying, since it is a new camera is / was.
This defect is now a covered warranty or am I to blame?

I thank you for your reply

mfg
orsen

Space


Antwort von Bernd E.:

"Orsen" wrote: ... this is now a defective warranty covered or am I to blame?
What you will read:
www.mpec-gmbh.de/hd/_detailpage/zubehoer/kameras/2026/Kramer_PT_1FW.html,
could it be that the Manufacturer of your own fault originates. How exactly the Panasonic handles, I do not know.

Gruß Bernd E.

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash