Infoseite // Battery Adapters large LED area light?



Frage von CedricRotherwood:


Here, perhaps, something for hobbyists of you (BdKid and co :-)

I have the following area light http://www.foto-walser.biz/shop/Artikel/3638/422/Flaechenleuchte_walimex_pro_LED_500_Flaechenleuchte.htm

I would be happy with this take to the beach at night, where an area of 5 x 5meter illuminate to some extent (please nora bats ala: does not work, so too little power)

Unfortunately I can not say anything about Wallimex the current (very poor in my opinion)
My current auditor is unfortunately broken (also quite pathetic :-)

2 questions:
1: Do you think that I with a thick SonyAku (BPU 60) can supply enough juice for 2 hours of light? If not ... there are alternatives?

2: what I need for an adapter - 220 volts times the Battery. Because what you have to tinker or there to buy?

Thank you very much

Cedric

Space


Antwort von domain:

If it is the little white lights you can relate to 220V synonymous directly from the car battery. The power consumption will amount to little more than 30 watts. 150 W but should be sufficient in all cases:
http://www.idealo.at/preisvergleich/OffersOfProduct/686072_-39752-kfz-dc-ac-inverter-schuko-150-w-hama.html

Space


Antwort von CedricRotherwood:

Well .. the car I did not know with s.Strand ...
The structure is supposed to look out as follows:
Aku
Adapter?
Cable
Lamp

;-)

Space


Antwort von domain:

In the case down to the Battery the remaining car leave :-)
Would a gel motorcycle battery, since it can not leaking.

Space


Antwort von tommyb:

Take the lamp on and check to see if the 220V supply is not in a simple power supply passes (most likely yes, electronics from China is usually very simple set up).

When actually inserted inside a power supply, then you have to measure how much comes out of there. Interesting is the tension. If it is 12V, then that is ever good. Maybe on the power supply is so synonymous got some. Possibly. which is synonymous to the polarity.

You have to tinker just a little now, but the effort is not particularly high. Buy you a V-Mount plate of eBay and they build to the housing. The cable you move to the inside.

The effort is expected for experienced hands up to be one hour, but is synonymous highly dependent of the internal structure of the lamp. If you're planning noah of soldering, then do not touch it or let someone do it.



SUPER DUPER alternative:
Dir of Purchase buy a 12V> 220V power converters from the car range. Craft a V-Mount plate tuned feddich. But noGarantie to function as manage most favorable voltage converter not really a sine (although usually is no preference, but still).

edit: Now I see it. The super-duper-alternative one has been proposed. But the V-Mount plate solution is not. Ha!

Space


Antwort von Bernd E.:

"Cedric red wood" wrote: I have ... ... ... walimex_pro_LED_500 Fluorescent Light ...
Short Question: How satisfied are you with the part, especially as color temperature, reproduction of skin tones and terms of processing? I'm on the search for such a light, but since I have so far only halogen and HMI experience, not really convinced.

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash