Infoseite // Beginners looking for help - Dubbing of JVC camcorder to PC / DVD Recorder



Frage von stoye46:


Hi All,

I'm new here and synonymous in the field of "Camcorderie.
In the help I find some partial answers to my questions, but my questions relate specifically to synonymous my hardware.

I have a JVC GZ-HD10E, a DVD recorder Mustek R580M and a laptop with Firewire and USB 1.1 ports.

Now I have got it right (even through the AV output, and I think this is similar) s.Camcorders recordings on the DVD recorder to dub and burn it to DVD. However, the quality is not very good.

Now to my question: How do I get the shots (in higher quality, digitally?) On the DVD recorder or on the pc then burn to DVD?
What cable should I use?
The camcorder has a component and a USB output.
The DVD recorder has iLink is still labeled with an input which.

I thank you in advance for your help.

VG
stoye46

Space


Antwort von tommyb:

The iLink input is a Firewire input. If your camera has a firewire output, you can connect to it. From there, the camera must be in the player mode and s.DVD recorder, the REC button is pressed.

Alternatively - wenns it should not be digital - would recommend S-Video. This provides better quality than the standard composite (RCA signal over;) yellow times.

Space


Antwort von stoye46:

Hello,

Thank you first time for the answer.

My camera has an output of either with FireWire, iLink or with with S-Video is known.

My camera has a USB - AV and Komponentausgang.
Are there any adapter cable to the recording in better quality than about AV on the DVD recorder or a PC get?

Thanks and VG

Space


Antwort von JMS Productions:

Sagmal, your camcorder is but according to https: / / www.samstores.com/_images/products/JVC-hg10.jpg
Space


Antwort von fourCCrider:

I'd the videos via usb - usb 2 but it will be absolutely necessary - on the computer play (; any capture program is attributed jvc still have it, I hope) and then prepare for the dvd-recorder.
Your computer has a PCMCIA slot? dafür gibts usb-2-plug-in cards - perhaps this connection is fast enough.
database according to your camcorder has belong here except composite, component video and even an HDMI output usb ... would be its use but the investment in a hdmi card for einenpc (; is the cheapest I think the intensity of pro blackmagic design at ca ® 200) inevitable. but be warned - check first if the map with the handle of the video format camcorders can - that is not secure.
lg, 4cc

Space


Antwort von Bernd E.:

"JMS Productions wrote: ... is your camcorder ... an HD camcorder. If no digital output, then I know not synonymous. That can not be fast ...
That at least one digital output, namely USB is available, the author has indeed told himself. So is everything all right.

"JMS Productions wrote: ... there would still have an output somewhere with "DV" or "i-link does not work" ...
With AVCHD camcorders, USB is the standard transmission. Because we need not look far for a Firewire connector, because it - except of two or three exceptions - is there anyway for Camera None of this kind. And those exceptions are Firewire synonymous just because they can spend an additional HDV-compatible format.

Space


Antwort von JMS Productions:

"Bernd E." wrote:
That at least one digital output, namely USB is available, the author has indeed told himself. So is everything all right.


Yes, I did indeed synonymous written: "... you could use the USB output for transferring to the PC. He is after all synonymous digital."

"Bernd E." wrote: With AVCHD camcorders, USB is the standard transmission.

I did not know that there is an AVCHD model is ...

Space


Antwort von stoye46:

Hi All,

yes, he has an HDMI output synonymous, sorry, I had embezzled ".
However, I have the card too expensive in this price range.

I have connected it via USB before, but I have only USB 1.1.
Supplied with a CD with ArcSoft videoImpressionen2 the program was included, which I have installed synonymous.
If I want to access the program on the camera, always comes the message "Can not connect to video device".

On the camera display stand with USB connection 3 points for Choice:
Reflect on PC
Save to PC
Create Disc
But no preference what I choose, whether the program Videoimpressionen can then access the camera, nor any done something else.

Could the reason be that I only have USB 1.1?

Thanks and VG

Space


Antwort von stoye46:

Hi All,

I now manage it.
With the program "CyberLink PowerDirector" I can access my camera via USB.

So now all chic :-)

VG

Space



Space



Antworten zu ähnlichen Fragen //


JVC Professional Introduces GY-HD camcorder HM750E
JVC synonymous faster signal processor for consumer camcorder
PC recognizes your camcorder (not, jvc gy-DV300)
And a pocket HD camcorder: Picsio of JVC GC-FM1
Camcorder is not recognized by the Calculator (JVC GR-DF470)
HELP, problems setting up my camcorder JVC GR-D245 with WinXP
Problem with the JVC camcorder GR D239E
Camcorder JVC GR-DVX10 playback problems
JVC camcorder under XP? Help!
user manual for JVC DR-D23E camcorder
JVC GR-D20e camcorder shows only black
I am looking for a simple tool for creating DVD ...




slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash