Frage von irgendana:
Hello,
until now I have video footage via firewire of a DVD recorder to a PC captured. Since the new DVD-recorder-generation does not have DV - Out connector, Firewire is the solution will soon become obsolete.
Can the Blackmagic Intensity Pro card as a replacement in mind to jump on the HDMI - out jack of the recorder into the PC to arrive? Does the card in Win XP without problems and can be synonymous to the Real Producer reuse?
Or would a Pinnacle box better?
Thank you very much
LG
irgendana
Antwort von WoWu:
@ Irgendana
The HDMI interface is not a substitute for a data interface.
HDMI on the way you get your signal (only) in RGB or YBR. A new encoding is then required.
Such a digital interface refers only to the transmission (TMDS), but not to the image components.
It runs you obviously synonymous filter to your picture may change.
That may be for a generation still image to be acceptable.
After the (re)-encoding, you can program your next used as usual.
Antwort von irgendana:
Thank you very much!
So far, I have with the Helix Producer via firewire rm-compressed files are created, that is with the HDMI port is not possible?
Are there in addition to the analog ports of the Pinnacle box a reasonable solution?
LG
Irgendana
Antwort von WoWu:
@ Irgendana
I now put in your application is not so deep in it and to be capable of only limited help to you. I understand this now so that you are the RN data of a working machine to a RN-stream transmit server?
That is but pure file transfer ...
In previous FW applications in the video field was only the real-time transmission via FW chosen because some protection within the TS could draw what is in your application but does not apply.
Therefore there is for you synonymous FT any other solution.
(As I said, I know about your specific application with little tap and of course a bit in the dark).
Say exactly what you want to do.
Antwort von PowerMac:
About a Mac Pro via HDMI uncompressed HD in real time to ProRes 422 to make ...
But HDMI as a replacement for firewire?
Antwort von WoWu:
Does this affect my performance?
Then it would come across something wrong ....
On SDI, HDMI, DP, DVI signals are
not coded in terms of video codecs, but only in the sense of a transmission format, ie no payload but only (or digitized RGB YRB). If it is then next in the calculator should be used, a new coding to be carried out. (Cascading of reduction algorithms).
Also, the signal to HDMI, for example, no longer the original, because of a 4:2:0 or 4:2:2, a 4:4:4 (of course just "stopped"). Furthermore, the interface in some cases to an AND formats makes 704 pixels Resolution720 ...
Who is more so as a monitor display, should already know exactly what he does.
Antwort von irgendana:
Hello,
Thanks for the answers.
The finished rm files are on the ratio quality / quantity of data useful. They will then be sent via ftp to a streaming server, which is synonymous not a problem.
With the Helix Producer is Clippings easily in real time on the PC, with a supplied editor you can edit the clips synonymous shorten in length.
There are problems here but with the aspect ratio of 16:9. As Producer, I have either Full (1440 x 1152) or Halbformat (720 x 576) are available.
What's still available? At the Pinnacle box would still VHS / S-Video Connections type. Is S-VHS on a 16:9-transfer possible?
LG
irgendana
Antwort von WoWu:
With 16:9 in the SD environment, there is only the possibility of it as a (wide), also with black bars above and below einzusoielen or anamorphic.
In both cases, probably for streaming only "Halbfomat" in question, although I'm not sure how far an RV Alert for anamorphic 16:9 support.
So You'd already done the video shows (incl. sw.Balken) time.
Now back to the original question: From where you get your signal, as it looks (or anamorphic with sw bars) and how you play it in your Helix A. (I type in times of DV player via FW?)
If you therefore not to DV anamorphic with a signal to do, but you have to do nothing .... ?
Or I understand this is wrong?
Probably, but your question is: how do I get now from the DV player without FW on my calculator ...??
Antwort von irgendana:
@ WoWu
Thank you very much. The signal comes from the computer via FW and is with black bars. This is a small, compressed Picture course even smaller. The original image is 16:9 without stripes.
"Probably, but your question is: how do I get now from the DV player without FW on my calculator ...??"
Exactly!
LG
irgendana
Antwort von MK:
"Probably, but your question is: how do I get now from the DV player without FW on my calculator ...??"
On a DVD-/-RW burn and rip s.PC again ... runs in the ideal case synonymous faster than real time, as opposed to transfer via Firewire, HDMI or analog.
Antwort von irgendana:
With FW, I have a two-minute contribution in two minutes in rm format s.PC.
When I previously broadcast games on DVD, I need a suitable program in addition to the DVD files to import, and only then can I (if ever) with the transformation begin.
Antwort von WoWu:
@ Irgendana
Such a file so you need to create or so ....
If I remember Helix includes no capture capabilities.
You must therefore ensure an appropriate file to create in order to make real next.
But that can pretty much everything, not just IR. So, MPEG1, 2,4, AVI, MOV or what always synonymous.
It requires you have a capture card, you can have with your hardware interface can absorb. This may be synonymous, if you want to use HDMI, the BM card.
Then you need but that piece of software in order to generate the files (the capture program), which of the card, receives the video stream. This may be synonymous almost any editing software.
Then is it a file, with the next helix can be processed.
I can still recall that synonymous Helix no format changes could ... which should therefore synonymous your capture program cover.
That with the 16:9 I did not quite understand .... Your camera makes for anamorphic images?
In any case, such a format change of your capture program will be discussed.
Antwort von MK:
Had no one said that there are only short snippets are ... then that is burning with the course of time.
But anyway when buying a new agenda, why must it then turn it back on consumer DVD recorder be? It is synonymous with hard disk recorder which you have direct access to the recorded material has.
Otherwise you could synonymous of a converter component or RGB (or synonymous my HDMI) to use Firewire to the data in the normal workflow of the calculator to get.
