Frage von andy123:
Dear All,
we will make several trips in the foreseeable future. With these I would like to attach a Cam s.PKW (; from the sunroof out) (in the surroundings, towns, roads film) to
(; Shots only to the front) in the same direction. The cam should therefore synonymous with speeds up to 80km / h (; maximum) to the recorded later handsome reproduce. Sounded interesting to me, for example, the JVC GZ-HD30, as it can HD, as synonymous in a more moderate price setting is located (; just around 500 ¬) and a correspondingly large hard drive provides. As the journeys could take many hours, I would like the Cam synonymous with (the electrical system, connect via 12V cigarette lighter).
Would the JVC GZ-HD30 suitable for such recordings, that is the chip can accommodate something like this handsome / play?
Are there any adapter board for connection of Cams (; except 220V/12V-Spannungswandler) to realize my purpose?
When Cam is not capable of what alternatives do you suggest? So what do I need for a cam according to pay attention?
Wide Anglewäre for narrow streets synonymous certainly interesting, but can be in my price range probably not realize more, right?
I thank you in advance!
Andy
Antwort von Markus_Krippner:
No matter what camera you take .... I would definitely recommend you to protect the lens in any way (; Clear filter or the like before).
A friend of me has something similar done on 16mm, and this is quite expensive ne (; Zeiss) Lens ruined.
markus ... :-)
Antwort von andy123:
No matter what camera you take .... I would definitely recommend you to protect the lens in any way (; Clear filter or the like before).
A friend of me has something similar done on 16mm, and this is quite expensive ne (; Zeiss) Lens ruined.
markus ... :-) Hi Mark,
Thanks for the tip!
/ Andy
Antwort von mov:
Eighth good on a (; optical) image stabilization. Hard disks do not like vibration, I do not know if the plates in camcorders have protection circuits, which (at more vibration off the plate, frame drops)?
I feed my HV20 via voltage controller with 12V from my rig. There are (; example of Conrad) kits that convert an input voltage to a certain, adjustable output voltage.
