Frage von michael_graf:
Hello,
My 2 years old SonyDCR-TRV12E shows a sudden vertical yellow-green streaks in the image recording, which distorts the picture almost entirely. What could be the problem? Is perhaps the broken CCD? Worthwhile in this case, a repair yet, because the warranty has expired?
Thank you, and Gruss,
Michael
Antwort von Markus:
Hello Michael,
You see these problems even during the recording? Or do they only become apparent when you play?
A repair is worthwhile only for devices in which the repair costs are in reasonable proportion to the purchase price. As a rule, is already associated with the estimate of a fee, but that you could clarify whether it is not only a trifle. In the consumer area, it is often better to buy a new camcorder (with two years warranty) for sale.
Antwort von michael_graf:
Hi Mark,
I see the problems already during the recording.
Friendly greeting,
Michael
Antwort von Markus:
Hello Michael,
this is a bad sign. What you going to do: repair or new purchase?
Antwort von GhostDog:
Hi Mark,
First, I will drop off the camera views, where I bought them and ask what to think about this. I'll probably buy myself a new but because I can get a better camera even for relatively little money.
Best regards,
Michael
Antwort von AMH:
Hello!
Check it with the help of your TV, if only the display is defective.
I have at home a old G3 PowerBook, which is filled with such stripes. But this can have various causes.
Gruss
Alex
Antwort von michael_graf:
Hello Everyone,
I've already made. On display are not kanns. Old MiniDVs of the camera will even play properly. The problem lies with the recording.
Gruss, Michael
Antwort von AMH:
Then it will s.den video heads or lying on the CCD.
Nevertheless, I would catch up to the dealer for a quote and look next.
Gruss
Alex
Antwort von Markus:
Old MiniDVs of the camera will even play properly. Then it will s.den video heads or lying on the CCD. That is unlikely with the video heads. Then the playback of older recordings would be synonymous not possible without error. Either it is located on the CCD or s.der subsequent signal processing. But what good is it if we suggest the possible cause. This alone is not helpful to the camcorder ...
Antwort von AMH:
Right! Since I probably skipped a bit ;-)
Gruss
Alex
Antwort von apfelkoenig:
Hello Michael,
I have exactly the same problem as you with my SonyTRV 8E. I let them look. Repair amount allegedly 400. Supposedly a "film director" should be broken. I do not trust the meat not quite going again ranlassen another expert.
What have you done in the meantime?
Gruss
Matthias
Antwort von Nightfly!:
St. Mark's voice to:
That is unlikely with the video heads. Then the playback of older recordings would be synonymous not possible without error. Either it is located on the CCD or s.der subsequent signal processing. But what good is it if we suggest the possible cause. This alone is not helpful to the camcorder ... AND that means either there is a defect due to aging, then the new purchase FAVORABLE (unfortunately, would be the more probable Sorry!).
OR it is at best a contamination of the electronics / contacts, then you could try by cancellations, or general cleaning (nor what the effect of course) the interior of the camera.
Greeting
Nightfly.
Antwort von Kiara Borini:
Had Sonynicht recently reported problems with the sensors? Maybe he's out of the batch?
http://forum.slashcam.de/probleme-with-bildausfall-beim-ccd-sensor-vt29335.html?highlight=ccd+sony
Antwort von Stefan:
No, that is not affected, according to DCR-TRV12E Sony's database of serial error http://www.css.ap.sony.com/usefulinfo/ CCD 20Imager/Camcorders.html%
Good luck
The fat Stefan
Antwort von Gast:
Hello, I have a question since I have the same thing with my sony camera ... now to me asking what is the "CCD"! can someone help me there?
Antwort von wrunge:
Hello, I have a question since I have the same thing with my sony camera ... now to me asking what is the "CCD"! can someone help me there? The image sensor. So the part that absorbs the Picture. Abbreviation for "charge-coupled device", see http://de.wikipedia.org/wiki/ CCD
Greeting
Holger
Antwort von Gast:
Hi Holger, Thanks for the quick response of Frage.Die Page of wikipedia has been very aufschlussreich.Gruß "guest"
Antwort von Gaste111:
Hello s.alle!
Although the issue is already outdated, I would not deny you that I have a similar problem with my DCR-HC30. The camera is now 3 years old and has spent the last 7 months in the cupboard. When I reactivated Now, I had s.and only a black picture on the viewfinder and to some noise. It was after several attempt to run to get the camera to the aforementioned filmstrips. Now, however, were already recognize a few contours (light dark). I got the cam then divided again, as I tend to pivot in the LCD ribbon cable have. I drew this cable then gestekct and and had noticed that the cable s.einer body was probably heated very strongly. It is clearly seen that the silicon chip has rubbed off on the cable including branded) (! I have the body then scraped clean () to see if it is seen that the cable has done, the was not so! After a few minutes ago I zusammengestekckt everything again and again turned on the camera and lo and behold, it works. Now a few days later, after it was reassembled, the same goes with the strip off again. Am I doing just s.and I leave you a few hours of running, then she has a lot of luck again with a completely normal picture. But this is not always halt. Now I have it precisely once taken apart and fix wobbled a bit s.dem cable and made me once again to the troubleshooting. I rausgefunden that creates the noise when I totter at the transition of the LCD ribbon cable. Therefore lies close to me that the cable is faulty, or perhaps synonymous) of Flachbandstecker (cold solder joint. Since morning I fly on vacation, I have unfortunately no time to tinker with next. If anyone ever replaced the ribbon cable or has a similar mistake, I would be very grateful for a small response.
Many greetings from Hamburg, Sebastian
Antwort von PeterM:
As already indicated above had Sonywith the production line of several CCD # s problems.
That was mainly of Sonyand digicam Minolta (now Sony) as synonymous Cameras
My Minolta A1 has been repaired even after three years without Rechnungsbnachweis.
We had two industry synonymous to synonymous video cameras have been repaired free of charge anstandnnslos
Synonymous if this issue applies to your camcorder you should be checking up on the website of Sony.
At least your Fehlerbeschreibzng is almost uniquely due to a CCD failure.
