Frage von Abu:
Hello, I take into consideration the XH-A1 with the new XH-A1s is ersetzen.Grund to ensure that the camera is running in capture and the 3-pin FireWire port, the XH-A1 is prone to damage. The XH-A1s has a 6-pin FireWire port should not quickly produce "wobbler". "Can anyone tell me whether the XH-A1s synonymous in combination with Canon Console can be used? On the Web site of Canon there is nothing to me, and even the dealer could give no information about this.
Thank you in advance, Abu
Antwort von nicecam:
According
slashCAM testing the XH-A1 S (This same test in "colored" synonymous with
Schielerudi) should be "tolerated Console" synonymous with the XH-A1 S. But I have no further information at the moment to do so.
But tell me, thou wilt surely seriously not only because of change because of the potentially lower susceptibility to faults of his successor??
In addition, I recommend you a Capture-Cam, for example, HV -20/30/40. So I'm going synonymous to synonymous, as well many others.
In fact, the Firewire port found on Canon models is probably particularly sensitive or expensive to repair than Sony for example - at least says ruessel.
On my HV-20 of the Firewire port was once synonymous already broken) (out of warranty. That is why my XH-A1 will be spared.
See synonymous here:
http://forum.slashcam.de/viewtopic.php?p=387664 # 387,664 http://forum.slashcam.de/xh-a1-erkennt-firewire-nicht-mehr-vt77571.html?highlight = I see my HV-20 does not
bitch as capture. By that I mean rather a camera that can be broken but the drive still synonymous.
That would be an option for you synonymous.
Antwort von Abu:
Capture bitch? Geiles word :-))
But a bitch can indeed be synonymous nor a lover. Seriously, I have made myself with the XH-A1 and am already familiarized synonymous very happy with it. But clearly, at the moment, I belong to the category "ambitious Beginners". The Firewire interface with the XH-A1 is a real nuisance. Especially when combined with Console. Premiere CS4 there seems to be even less sensitive. After a year of the 3-pin bushing is already so worn out that the connection to the camera constantly stops. Reasonable work is no longer possible. This problem is known. Therefore, we have installed one 6-pin synonymous with the S-box. For me an absolute sales argument in a camera with which I am satisfied and in which I am incorporated. When Console funz would not, however, it would be a big disadvantage. White balance presets etc. .. I can not control, through Premiere
