Frage von Supe:
Hello!
I always draw on in HD, but most need as a goal-DV quality (standard television) and would therefore in APPro2 synonymous IR cut, do so only Downgesampleten the stream from the camera (XH-A1) from the tape.
What are the correct settings or what you choose? Is that capturing then synonymous with APPro2 then possible or it is in principle of the Camera difficult. Until now I always Ahbe HDVSplit in akteullen version related.
Thank you for enlightenment!
Supe
Antwort von Supe:
Wolfgang wrote me the following, which I do not deprive other seekers will:
In the camera menu (player mode), "Signal Setup" the point "HD Down conv" on a turn, have come to the film as an ordinary HDV DV signal from the Firewire ....... Regard! Only the menu and then select the camera with the calculator link! Otherwise, the point is not available .... And just as it's synonymous. Thank you, Wolfgang.
Supe
Antwort von BananaDragon:
I work with FCE. When I record in HD and then down as described above, the sample picture after Capuren (Simple configuration DV PAL) very stretched out. And the quality is worse than normal DV.
What am I doing wrong?
Antwort von PowerMac:
Simple configuration PAL DV 16:9.
Antwort von BananaDragon:
Perhaps I am mistaken, but I think that's for me to garnicht choice ... but it has actually. Mh, I am unfortunately not at home so I can only see after tomorrow.
Thank you, Patrick.
Antwort von BananaDragon:
Again after I've seen. Gives me no configuration PAL DV 16:9. Did the whole in 25F mode. If I capture in HDV, I have the attitude HDV Apple Intermediate Codec 720p30 choose, right? (If not Interlaced Capture).
Well, my problem with with runterkonvertieren there is still
Antwort von PowerMac:
Do you have FCE or Final Cut Pro? Which version?
So 720p30 is wrong. And the Apple Intermediate Codec synonymous. There are HDV 720/25p. This is the right to Capturn. To Calculate your sequence down an anamorphic PAL sequence throw (DV or better ProRes 422).
Antwort von BananaDragon:
I have FCE HD (3.5)
Somehow, there are all these settings, you call me I can not. Is it because I have FCE?
