DCR-HV40e: Battery quickly, Memory Stick LED blinks!
Frage von Gast-Sony:
Hello community forums,
I hope to help here: I've been a long time (6 months) my camcorder is not used anymore. After charging the batteries is that a few days later, completely empty, even though only about 6 minutes were filmed! I notice now that's off, the LED on the memory sticks every few seconds short flashes! That was not so, I think. In the manual, this is not described. Accordingly, the LED lights only when the stick is being accessed.
The charging display goes between synonymous always times out!
In the manual I read that after about 3 months the battery is discharged. Is this the blinking LED Memory Stick have something to do (not documented).
I have the entire way, synonymous with a spare battery tested, which is weeks after the shop outside of the camcorder was still full. Battery discharged only synonymous with the device off noticeably within a few hours.
Thanks for your hints and experiences, Marco
Antwort von Gast-Sony:
Oops, sorry a typing error in the model name. The correct title is, of course, DCR-HC40e.
Antwort von homer1234:
Hello!
I have exactly the same problem with my DCR-HC40E. A request from the Sony support has unfortunately synonymous not revealed with the request submitted by the unit (course fee). Do you have a problem with your camcorder already deneme can fix?
Regards Holger
Antwort von prem:
Hello,
I have been a few days this problem exactly synonymous.
Moreover, the works synonymous iLink connection to the PC (WinXP SP2) no longer works.
Are there solutions?
Thank you and greetings
M. Drews
Antwort von homer1234:
Hello,
So the iLink connection for my camcorder still works. Actually, the power adapter inserted in your camcorder is fully operational.
Would be nice if someone with a solution of the problem here could post how to fix the error.
Regards Holger
Antwort von Markus:
"Drews M." wrote:
Moreover, the works synonymous iLink connection to the PC (WinXP SP2) no longer works.
Test times another DV camcorder s.Deinem Calculator. The same then synonymous again with a different (possibly higher) firewire cable. This cable allows you and your camcorder as a cause and exclude you turn your computer ...
Continued:
Antwort von poluroud20:
Hello,
I have the camcorder s.einem other tested Calculator - synonymous there was no contact established.
With the same cable and camcorder Andrees everything went smoothly. Therefore, it seems indeed to lie s.Camcorders.
Now the question is whether you need anything special settings (except the activation of the DV in / out)?
Thanks and greetings
M. Drews
Antwort von Markus:
"Drews M." wrote:
Now the question is whether you need anything special settings (except the activation of the DV in / out)?
I am at least unknown. - But where / how you have the DV-output interface? Is not always active?
Antwort von spinakis:
Hello,
You can use the output in the menu to enable or disable. The point can be found under "General Settings", etc.
Greeting M. Drews
Antwort von Bernd E.:
"Mark" wrote:
But where / how you have the DV-output interface? Is not always active?
Had I actually thought synonymous, at any rate, I know it is no different.
"Anonymous" wrote:
You can use the output in the menu to enable or disable.
Amazing. That the USB streaming output or a possibly existing analogue-digital converter and one-off can be quite normal, but the ordinary DV output? That would surprise me very much ...
Gruß Bernd E.
Antwort von gab:
Hello, nobody has a clue what it is with the flashing LED Memory Stick is all about? For me the same problem, only that the battery can recharge garnicht more (I have tried 3 batteries). The CHG LED is not lit, and the Batt Info does not synonymous. The cord, it is not, the Cam s.Netzkabel is fully functional. I have the DCR-HC40.
