Frage von bene_2006:
A question relating to S-Video send out from the SonyEX1.
The camera has various exits to spend even video signals. In my case, an S-video signal in SD on a plasma screen to be displayed.
Now the camera even an AV-out and the supplied breakout cable is synonymous represents those commonly two stereo RCA (white and red) and a composite RCA (yellow) are available. According to the manual can about this AV output S-video are synonymous ausgegben. Now my question is: Can be remodeled, the mitgliegerte AV cable via Y-cable of RCA to S-Video and this is one of the audio cable is used for chrominance and luminance? The manual is not enthehmen that. Or is there a pre-assembled cable with S-video jack?
As an alternative solution: The s.der camera mounted SDI connector can probably synonymous S-Video output only here I bemoetige to my understanding of the signal of a converter umswitched BNC to S-Video. Or is there a corresponding cable solution.
Thank you.
Antwort von deti:
Now the camera even an AV-out and the supplied breakout cable is synonymous represents those commonly two stereo RCA (white and red) and a composite RCA (yellow) are available. According to the manual can about this AV output S-video are synonymous ausgegben. For Y / C or S-video you need the cable VMC-15FS, which is NOT included.
Deti
Antwort von frm:
SDi and S Video are but two worlds? Or, I understand now what wrong.
Antwort von deti:
Well the thread starter has done a little confused. He said one alternative would convert the SDI signal and resulting Y / C in SD-making quality. That would, of course, an (expensive) alternative. Much cheaper is to use the above cable adapter for the A / V interface.
Deti
