Frage von Patrol:
Hello
As requested I have in the archive rumgestöbert if anyone had the same error as I do, nothing the same, so I hope someone wirlich me from getting rid of this saublöden can (-;
PC: Pentium 4 3GHz Hyper. with 3GB of RAM.
Matrox RT.X100 with Premiere 6.5
Errors since broken my Asus motherboard for a MSI has been replaced.
- Premiere 6.5 was always the hang-up.
- Premiere 6.5 uninstalled and reinstalled, still same error.
- Hmm .... thought maybe it is synonymous s.Matrox.
- Matrox X. Tools software uninstalled.
- Matrox X. Tools software reinstallation fehlegeschlagen ..... Error display = Setup can not continue because your computer has at least 512MB of RAM for use with the Matrox RT.X system is needed. Increase the RAM on your computer before you run Setup again.
Why the error? I have 3GB of RAM!
In order to complete: Under the device manager there are 3 Matrox dots, 2 of them with yellow Ausrufezeigen!
- Matrox RT.X100 Flex3D Accelerator (yellow)
- Matrox Video Bus (yellow)
- Matrox DV / MPEG Codec Driver (iO)
To PLEASE HELP!
Gruss
Roberto
Antwort von Container:
how much RAM is under computer properties (right click on My Computer-> Properties) are displayed?
Antwort von Patrol:
3GB will be displayed!
Antwort von Andreas_Kiel:
Obviously, the Matrox software of any other information given as you write yes Dir synonymous:
Errors since broken my Asus motherboard for a MSI has been replaced. I assume, since you s.den motherboard swaps do, you have + the idea of any existing controls in the BIOS for memory synonymous correctly.
Since you'll most likely a defective motherboard against another defective motherboard have exchanged. Another possibility, probably not as you have in transforming the board / memory chip (statically charged?) Damaged.
BG
Andreas
Antwort von Container:
Matrox put your time into a slot on the Mobo unshareed and install new.
Antwort von Patrol:
Sorry, wrong wording, I have given the Board of an IT firm replaced. If the new board to be broken, why is then displayed under 3GB RAM?
Ne time, another question could be due to the problems because I am under Device Manager uninstall the HW is not it?
Antwort von Patrol:
Hello Guest
Hmm ... So drive down box, so I s.masse sure that I get no static electricity, matrox card out, everything should work, but what or where should I push the thing purely "unshareed slot of the Mobo?! I understand what you unshareed with Mobo and do, but no idea where this slot on my MSI board is!
Antwort von Andreas_Kiel:
... I got in the BIOS once 64MByte displayed (ists so long ago), although only 32 were installed. Windows reported times 32, times 16, depending on the sun position and the toads Garzustand eyes.
Diagnosis: memory stones in the bucket, probably droop. Hence my supposition.
BG
Andreas
Antwort von Markus:
See here:
"
Matroxeffekte can not activate "
RT.X100 Xtrem Pro Analog input (Posted 22.11.06 at 18:12 from the clock)
... is always the same cause.
Antwort von Container:
Hello Andres_Kiel
What opportunities are there for the defects in memory to check? Software tool or something?
or should I look at the box shutting down, I just save time and just put a stop to it and then try the same with the next? How could I possibly irruieren but what is broken! or?
Hi Markus
Hmm ... This IT company, told me no problem, we look at it, then told me the board is defective, we could replace it! However, had I not pointed out that it is a different board is! I thought I have, hopefully, comes the good!
Among the kompatieblen Mobo for RT.X100 no MSI drin! Shit!
Antwort von Eva Maier:
As far as my contacts with MSI boards are concerned I have unfortunately synonymous only problems with it, are apparently not for what umbedingt Unlike Office applications, you will still be in Siemensstadt Hauf PC.
Antwort von Patrol:
Achh neeeee ...... scheisse!
My last hope is that a memory could be faulty!
Hmm ... I will look at the box shutting down and only one or 512MB of it can, then test and initiated the next, sometimes it might look if a stop is broken!
Please, pushes me the thumbs! In 15min. do I sign up again!
For those who contribute have written, heartfelt thanks for the time
You've made!
Gruss Patrol
Antwort von Patrol:
Sooo, what has taken longer than I thought, Janu after countless tests, I had to find the bar 3 +4 per 512MB is the cause of my problem.
Before I use my box for this IT company brought, the RAM correctly. When I PC Fritz brought my chest, I told him, I would not fool him, but I have heard that if someone in the PC fummelt without s.masse tuned to be in significant hardware damage could come. He said only, ne ne, soo it's not bad, Janu, now we have the mustard! What a shit!
Let's see whether he's replaced the RAM! To be continued! (-;
+ What it has in any case, I get the Inst of Matrox.XTolls no more error message!
Thanks for the tips s.alle
Gruss
Patrol
Antwort von Andreas_Kiel:
He said only, ne ne, soo bad this is not Classic last words of a electrician.
Good luck with your exchange: you really ought to (!) To replace the chips (or the Board, if it is in the bucket), but proves times who has the vergeigt.
Hopefully, it is only the memory ...
BG,
Andreas
(sorry for the late reply)
Antwort von Markus:
... this IT company, told me no problem ... The catch is that while IT companies have knowledge of computers (should) co-operation with the video but some very different requirements. There is usually some s.Zusatzwissen needed to build functioning systems. Not for nothing, there are specialist dealers, the computer for video editing together.
