Frage von Amatör:
Moin moin at Slashcam,
I voted with an FX-1 two bands played. One could easily capture, while others could only consistently blue Picture to see it via firewire were synonymous offered no data, however, the date and time of recording correctly displayed.
First I thought that a cleaning cartridge may be why, unfortunately, no. Then I have the tape once completely through, so to see whether there is somewhere to read data - synonymous: no! A test with a fast-forward then has shown that there is data on the tape are - what it looks like the whole recording ... there is probably a maintenance of the Cam is due, is more important to me but as I now tape could capture, or can test whether the recording itself is 100%? And who else had this problem? What wars?
Thank you, the Amato
PS: Somebody here in the Nuremberg area in which I could capture the tape? ;-)
PPS: Sorry wg. the umlaut, hab hier ein engl. Key board
Antwort von tommyb:
Do you have both recorded tapes with HDV? Or is a computer? You have the camera capturing the switch. Pay attention.
Antwort von Amatör:
Hi, are both HDV everything s.einem evening, right after each other, without intervening Rumstellerei.
Antwort von WideScreen:
Know when new Z7 I had the problem synonymous times. When you fast forward the picture was there, but is not in play. Battery s.and again took off since shooting. Or I've a DV tape is inserted in between. The error I have never really found. Not very encouraging. The tapes in the M15 or M25 recorder ran flawlessly .....
Antwort von volki:
what exactly is the problem, I can not tell you synonymous, but ...............
Sonyrät, not in vain, at work, where a network is available, the camera ALWAYS with external power supply and not on the Battery. But yes it has extra part in a power
Antwort von Jogi:
what exactly is the problem, I can not tell you synonymous, but ...............
Sonyrät, not in vain, at work, where a network is available, the camera ALWAYS with external power supply and not on the Battery. But yes it has extra part in a power At the Battery it can probably not have located. If the battery power decreases as the corresponding functions are no longer guaranteed auto switches from the CAM. Previously, each synonymous Cam indicates the battery capacity is insufficient / is.
Antwort von volki:
what exactly is the problem, I can not tell you synonymous, but ...............
Sonyrät, not in vain, at work, where a network is available, the camera ALWAYS with external power supply and not on the Battery. But yes it has extra part in a power
At the Battery it can probably not have located. If the battery power decreases as the corresponding functions are no longer guaranteed auto switches from the CAM. Previously, each synonymous Cam indicates the battery capacity is insufficient / is. Anyone who thinks everything is blessed and try it out.
I did not say that the cause would be, but power supply is ALWAYS better
Antwort von Amatör:
Aloha, so the Battery (not very small, the larger) was fully loaded and had lots of time - the old is not synonymous and will be treated decently.
Had power supply have been possible, I would have done. I would then probably synonymous to the same notebook captured and ultimately about the problem did not occurred ;-)
Battery down, another thing ... I've tried everything ... nada .... is for me the only question is whether the Cam now needs to be serviced first and then the tape, I can draw down (or try)? Weiss someone how long a service takes?
Danke & Gruß
Antwort von Frank B.:
Before the Camera for maintenance givest, but first try out whether more synonymous tapes not be played. Take a look at a new tape on! What happens then? What is played?
If a tape can be played, but not the other and then the first can be played, then either what with the recording on the tape is not damaged or folded it agrees with what is not his mechanics. If a camera malfunction has occurred, a new tape should not synonymous and can be played back.
Something called a process of elimination. To hate any errors very often come to the track. So, try a bit around!
Frank
Antwort von Frank B.:
Nochwas. Synonymous times I would check all the settings and reset times maybe.
Frank
Antwort von Amatör:
Hello and thank you for your suggestions ... Reset, other tapes, etc. I had been through everything and everything was ok ... to earlier: a 3 months old Sony Premium partout he does not accept immediately after insertion of the phrase "re-insert cassette" and the flashing message "C: 31:22" (which probably is an error code which I unfortunately no find info). It is now clear to me that it is not s.dieser a tape may be. Prompt Cam makes the same at the original "problem child" - I put off Battery NEN other, he is not ... and then yet again and then not, the error is very vague and not isolate. At least, I can not clear line in the presence detect.
After much inside and out and make do and he has the problem cartridge adopted. Then I've done what I really wanted to avoid: a few seconds on the tape recorded re-recorded and lo and behold, those few seconds, I can capture - before and then again only a blue screen ... until next time, because then I could just recorded synonymous not see ...
To that extent I do now believe that the Cam urgently needs therapy ... where you let your Cams wait? Do you have a good address for me?
Still I am looking for an opportunity of this tape to capture. Therefore, once again an appeal s.alle here with HDV capabilities in space Nuremberg: to whom I could go 60 minutes down this draw?
Gruß, the Amatör
Antwort von Frank B.:
So as you describe it now you need really a quirk of the expected. Will you just go to someone who is filming synonymous in HDV (for you hope you have not recorded in LP) to time to try whether the tape can play. If not, Camera and Tape to service with the request that the tape to save.
Speaking of Long Play, You have not accidentally included in LP? because it could be caused by a problem with the track position to come to the problem.
Did the error message again just gegooglet. That way, you can make synonymous times;)
Here is an interesting result:
http://www.slashcam.de/info/Fehlercode-C31-22-defektes-tape--248232.html
Defective tape also. And of course the behavior of the camera is very cryptic.
Frank
Antwort von Frank B.:
And once again remember what. Sorry!
I had with my old VX 1000 big problems with Sony tapes. Since I have only good use Panasonic tapes, there are no problems anymore. Even my FX 1 I feed only with bands of type Panasonic AY-DVM60YE. Have never had problems with it.
Frank
Antwort von Jogi:
So as you describe it now you need really a quirk of the expected. Will you just go to someone who is filming synonymous in HDV (for you hope you have not recorded in LP) to time to try whether the tape can play. If not, Camera and Tape to service with the request that the tape to save.
Speaking of Long Play, You have not accidentally included in LP? because it could be caused by a problem with the track position to come to the problem.
Did the error message again just gegooglet. That way, you can make synonymous times;)
Here is an interesting result:
http://www.slashcam.de/info/Fehlercode-C31-22-defektes-tape--248232.html
Defective tape also. And of course the behavior of the camera is very cryptic.
Frank Long Play is HDV or the FX1 is not possible!
Antwort von Amatör:
Halli hallo, erstmal best thanks for your efforts. I am now in detail with the C :31:22-set problem and tried everything possible ... the error is completely arbitrary and not understandable, whether expensive or cheap tapes, old or new, totally cold. Of the many problems cited with this band purely mechanical role is not "broken", but something does not nunmal more. On the head, the tapes of Cam s.besten, horizontal is hardly what to do. Thus, I now synonymous the do-it-yourself search - because it is probably nix ourselves (at least as Amatör ;-).
Still do I search for a way to capture the tape, as some here with me are already impatiently ... and I would like to know whether what I can see fast-forward, really is a complete recording ...
Greeting
Antwort von Jogi:
The tape seems no longer the correct contact in the head recording / play connection. If you have to fast forward (better tape-head contact), but images can see the suspect does something recorded on tape is. It remains only with the second cam to learn.
Antwort von WeiZen:
Antwort von Frank B.:
Long Play is HDV or the FX1 is not possible! Sure, logo. I had a small mistake. Bin of my old VX 1000 is assumed. But no preference for any Camera - Long Play is always bad.
Fortunately, it has the FX 1 never erst
The faulty camera probably has a problem with the Bandzug. I would really be a workshop. It could be that a thorough cleaning of the drive wheels incl enough, but even that should Amatör in the hands of a professional type.
I would again strongly warn away places and tape marks in mixed mode to use.
Frank
Antwort von Frank B.:
Long Play is HDV or the FX1 is not possible! Sure, logo. I had a small mistake. Bin of my old VX 1000 is assumed. But no preference for any Camera - Long Play is always bad.
Fortunately, it has the FX 1 never erst
The faulty camera probably has a problem with the Bandzug. I would really be a workshop. It could be that a thorough cleaning of the drive wheels incl enough, but even that should Amatör in the hands of a professional type.
I would again strongly warn away places and tape marks in mixed mode to use.
Frank
Antwort von Amatör:
Halli hallo, for you for more information: I had a chance to tape the HV20 in a test and unfortunately the same result. Thus, the C :31:22-error of the FX-1 has apparently not with the "defective" tape alone to do so. The HV20 takes the tape and shows always a picture, unless you can simply run on Play. Then it shows only blue synonymous Picture, in contrast to the FX-1 reads the HV20 but not during the time code. Also it shows the entire recording, if I run backwards tape. It has no sound, but it would be an option, the image material to get, unfortunately is in the reverse-play mode drastically reduced the quality and the ge-te-capture material is only good for mice cinema ....
What `s looks, the whole recording without any recognizable image, or other errors affect the ways ... someone knows how to via Firewire synonymous in reverse or fast-forward full image gets displayed? It seems to me as if the cam via firewire only in standard-play the whole data ....
Who has ne ideas for me?
Danke & Gruß
