Frage von Sahnebär:
Hello,
I have a Samsung VPD20 as the bottom of the picture.! I've been working since ~ 3 years with the camera.
- Now my problem: The LCD monitor shows the Picture is green, when I play a video s.Television synonymous. If the lens is now broken, because I had accidentally before about 2 months, the camera kept in bright light.
-I need the camera because it is strictly a celebration that will indeed be documented. What should I do?
- The warranty has already expired. And I must say that the camera in time is synonymous already been repaired twice, (anything with the drive was not OK)
Picture 1Picture 2
Antwort von Markus:
Hello,
I do not think that the optics is damaged. Anyway, I've never seen such a thing leads to a green picture. - Rather, the electronic signal processing could be the reason.
Possibly synonymous but the camcorder has a night vision mode, and is still powered on?
Antwort von Sahnebär:
-no, that forbearance - mode is not turned on.
Internal Signal Processing and as I bekomm repaired again?
(Reset button where are you? 8-))
-Do I have to surely bring to service it?
Antwort von Erich:
Hello!
Infrared images look so similar synonymous. Perhaps a "Nightshot option" or the like is enabled.
Is it possible to reset the camera to the "factory setting"?
In tube cameras were extremely bright light (camera held in the sun) damage to the video tube) will burn (. Modern CCD are as robust.
Good luck!
Erich
Antwort von Markus:
If it is because ...
Internal Signal Processing and as I bekomm repaired again? ... then I would ...
... which surely bring to the service ... Before that, with the reset, try - if the camcorder so provides a function.
Antwort von Sahnebär:
the only problem is the camera does not have a reset button or something similar, and I say again, the night mode (Nightshot, Infrarrotdingsbums) is not turned on.
The most obvious would be the signal processing as already stated, was but I'm not sure. Schlieslich I need to know if I send it for repair and Money berrappen needs.
Antwort von Markus:
... but I'm not sure. Schlieslich I need to know if I send it for repair and Money berrappen needs. How do you want out? Video technology to study and then traverse itself? Or bring the unit to a specialist, can be measured and possibly pay a few dollars for a quote? The latter is charged to a repair, incidentally, that is, you dont pay estimate
and repair, but only for the repair.
Antwort von Erich:
Hello!
The camera has a "Night Capture (night shots)"
http://av.samsung.de/article.asp?artid=A4278827-0421-4E21-B423-16A4EE0DA882&show=feats
Scroll down on the page.
The example image fits very well.
Perhaps even the "Easy-recording mode".
Generally, the reading of the manual is often of advantage.
Greetings!
Erich
Antwort von r.p.television:
Sounds like an internal signal processing!
Sometimes such image errors due to loose cable connectors are caused in the case.
In my professional camera SONY DSR-300 of lößt are always triggered by vibrations Steckverbindug one of the chips, which crashed synonymous single colors or the whole picture. Predominantly, the picture turns green.
After the warranty is expired anyway:
Attempts to unscrew the case (for small consumer devices is, unfortunately, is often more difficult than for the professional parts) and for finding a possible loose connection.
Otherwise you will have no other choice as a service. But that costs $ 200 or more quickly.
Liebe Grüße, Mike
Antwort von Markus:
In my professional camera SONY DSR-300 of lößt are always triggered by vibrations Steckverbindug one of the chips ... Hi Mike,
Why then fix the connector is not concerned with a drop of sealing-wax? Then, the uncertainty would end.
Antwort von Sahnebär:
Ok, we are now the tragedy to an end, but I am grateful for the many possible solutions of you.
But this is not the end, I'll bring the camera to service on Tuesday or Wednesday. In addition, I'll tell you, of course, where the error was and how much did it cost Euronen. I wish I had not such a Beginners Camera but even something better, but who "no money" spends!
So in subsequent Treads then just the "repair"
Antwort von Markus:
I wish I had not such a Beginners Camera but even something better, but who "no money" spends! Do you think about a new camcorder for, rather than to repair the defective too?
So in subsequent Treads then just the "repair" Poste it yet in this thread, then one sees the connection synonymous. ;-)
Antwort von Sahnebär:
RP television? you had for your problem can not open a new Tread. ____________________________________________________________
But before that, I'll e-mail request s.Samsung.
Antwort von Markus:
RP television? you had for your problem can not open a new Tread. I found the comments of Mike not so inappropriate. Ultimately it was indeed an explanation, which could possibly be broken in your camcorder. ;-)
Antwort von randoni:
.. wish
rptelevision even support. loose connectors or cable eg partial fracture can lead to such phenomena. that would be a similar inexpensive repair ...
:-)
good luck
Antwort von Sahnebär:
So until tomorrow gehts mal s.zum Service
Antwort von Sahnebär:
What surprised me:
You buy something such a camcorder (300-400 euros)
Built in Japan was indeed the (low-wage country)
And if he ever is broken, I want to pay 100 euros?
For what am I a number?
Antwort von nico:
For what am I a number? You ask the best time at Samsung
Antwort von Sahnebär:
So,
now I have the camera erstmal delivered to the service.
It takes so now its time.
What is new is the warranty for the Samsung verlagt a fixed fee in the event:
150 euro before it goes to the cost estimate. Well, it would not be so many petty cases or Samsung
Better Consumer Cameras build
It would certainly give it hardly synonymous.
Antwort von Markus:
yes ... the built in Japan was (low-wage country) Japan, a low-wage country? Then there could be many, but not even afford a roof over their heads. Or all live in the company? 5 days annual leave could be a sign ... ;-)
You buy something such a camcorder (300-400 euros)
And if he ever is broken, I want to pay 100 euros? In Billigcamcordern true in the case of a repair often relative to the purchase price is not. The next time you purchase a decent camcorder for around ¬ 2,000. If a repair will cost 100 ¬ then it is absolutely okay. ;-)
Antwort von Sahnebär:
Well I will now synonymous not upset about the camera.
Until now it has always (done for my needs) good shots.
In any case, it is still in service, and something new as soon as I know, I post it here. Until then
zum Bild
Antwort von MalteLoh:
Hello,
I have with my VP-D20 now the same problem ...
It shows in turn usually not only a strong an.Dann Picture Picture spoiled the whole time or just a black picture, run down where sometimes isolated white stripes.
Then when times comes a picture, it is strong greenish / gold and I have synonymous feel that the quality of some declines.
Occasionally there is synonymous but before that he s.funktioniert from power and has a good picture. But this is the exception and also the picture is then often bad again during the recording.
I now gucke times what is reported here however, screw the camcorder times on tomorrow and get me, if nothing helps to establish a cost estimate or maybe get myself a new / used.
Mfg. Malte L.
Antwort von MalteLoh:
oh, sorry, not at all noticed that the Therad is already so old.
Antwort von Sahnebär:
So
The repair has cost about 180 euros
The lens was not damaged but the internal signal processing
closer you can find out if you send me an email (via the forum, for example)
So everything back intact and ready to start ;-)
Antwort von Markus:
... if you send me an email (via the forum, for example) Here is a challenge for you: Take time contact with someone via PM here on the forum ... someone who has his email address has not specified! ;-)
But regardless of the time: Why do you not post in the forum? Is it so secret?
Antwort von r.p. television:
I shall have a right to say that it sounds like an internal signal processing ....
Probably the technician has only a time or a ribbon cable plugged back into the motherboard (VI-Board).
On the bill, although it is often something else, but the fact is that the greatest and most difficult work is to the tiny body of the consumer camcorder that show (is) often with twisted, half-elastic body parts.
Antwort von thallo:
Hello,
synonymous would like to know what it was. Did the Cam with the same problem here before me. It is already disassembled.
Cables are all properly connected.
Thanks schonmal for an answer
