Frage von alpenmolch:
Tach together ....
At the HMC 151 owners or knowing: If you have ever updated to the latest firmware?
`I stand there a bit on the tube ....
The way I see it there are 2 options.
Once a
"manual" FW update with the latest firmware file, which I of the PANA-pass broadcast page
(http://eww.pass.panasonic.co.jp/p2ui/guest/TopLogin.do)
can download. This installed until a special Pana-Drivers for Business communication with the connection via USB and HMC151 ... modes `s settings s.der Cam me so far clear.
The other solution would be an
"online" way out "of the SW-P2 logger, this then provides a web cam link between PANA and pass on the broadcast side USB connection ....
I see that correct? Logged and recorded on PANA-pass broadcast side, I am.
greetz
ecki
Antwort von deti:
Firmware updates you have to import from Panasonic always "manual". The P2 status logger is only to the current state of the camera to forward (FW version, operating hours and error conditions) at regular intervals s.Panasonic. From this data, Panasonic decide whether a prolonged up to 5 years warranty is effective or not.
Deti
Antwort von alpenmolch:
Deti @
Thanxx ...
greetz
ecki
Antwort von Jörg:
Logged and recorded on PANA-pass broadcast side, I am. Then you load down the file, and install the update.
If it is just about 1.21, I am still not clear what causes this update, which functions are affected.
The misty Ausagen on U.S. sites are more wishful thinking, information was not synonymous of "high" position.
Antwort von Bernd E.:
HMC 151st ... .. Who has ever been to the latest firmware updated? ... Does someone ever been anybody know what this update changes? Panasonic itself does not make any useful statements (which are top of that to believe sometimes difficult) and the HMC151 owners who have already performed the update are synonymous is divided on whether and how the new firmware effects.
Antwort von alpenmolch:
... Tjaaa, I'm thinking hard on synonymous.
"Never change a running system" ...
Some report that after the firmware update the Class 10 - detect SD Memory Card's. Others have the same FW with no problems. I myself have not tried "10" because I have so far with "6" null problemo had ,'...
greetz
ecki
Antwort von Jörg:
So you have the first firmware version on the cam, this was not supporting Class 10
The update to the next version is officially no longer s.Netz mM after, when it comes to use of the class 10 is optional, an update
zalso Wingender.
Because I can see no downside to this is in terms of "the
running system "nothing in the way.
