Frage von snegowik:
Hello!
The MiniKasette, not DVD, camcorder of my W95D SAMSUNG is randvollgefilmt. I would therefore now the content on a VHS cassette of your choice. I have already unsuccessfully tried the following:
1.Camcorders s.den video - and audio - In input on the TV connected.
2.Ich can the contents of the tape on the television play.
4.Leere videotapes is inserted.
I 3.Obwohl with my VCR recording source AV has set, it is NOT on the VHS dub.
I ask for urgent help! Thank you! ulli@inbox.ru
Antwort von Markus73:
I 3.Obwohl with my VCR recording source AV has set, it is NOT on the VHS dub. Probably because of "AV" is usually the signal is recorded via the scart socket is clean. Maybe you can to your TV so that the signal via Scart output again?
Or maybe you have the camera connected directly s.den VCR.
Regards,
Markus
Antwort von thos-berlin:
Or maybe you have the camera connected directly s.den VCR. Greetings, Markus That will probably de only way. There is virtually no television, a Ausgng have.
So the s.den Camera VCR and connect s.Television the input in such a manner that the signal from the video recorder is displayed (only for control).
If the VCR just an AV or Scart connection, the picture s.Television control over the antenna cable. VCR "send" the picture is usually Knal 36th
Regardless of which is expected in the Überspieleung on a VHS Quallität not the better. My suggestion would be more for the camera a new blank tape available to be ... (The VHS copy of any use to Browsing)
Antwort von snegowik:
I 3.Obwohl with my VCR recording source AV has set, it is NOT on the VHS dub.
Probably because of "AV" is usually the signal is recorded via the scart socket is clean. Maybe you can to your TV so that the signal via Scart output again?
Or maybe you have the camera connected directly s.den VCR.
Regards,
Markus Marcus, thank you! And how you have to make the television so that the signal via scart again there? No clue!
Antwort von snegowik:
I 3.Obwohl with my VCR recording source AV has set, it is NOT on the VHS dub.
Probably because of "AV" is usually the signal is recorded via the scart socket is clean. Maybe you can to your TV so that the signal via Scart output again?
Or maybe you have the camera connected directly s.den VCR.
Regards,
Markus I have tried the Camera synonymous directly s.meinen Video Player DVP 3350V/01, kobinierter with VHS player, nothing happened.
Antwort von Markus73:
Marcus, thank you! And how you have to make the television so that the signal via scart again there? No clue! That you know much better than I, because only you know what you have for a television and searched the manual about this. As I said, this feature is rather exotic. I think my old (good) Sony Television was that the average unit rather not ...
Regards,
Markus
Antwort von Meggs:
I 3.Obwohl with my VCR recording source AV has set, it is NOT on the VHS dub. You have your camcorder of course synonymous s.AV input on the VCR connected, no s.AV input of the TV.
Antwort von snegowik:
I 3.Obwohl with my VCR recording source AV has set, it is NOT on the VHS dub.
You have your camcorder of course synonymous s.AV input on the VCR connected, no s.AV input of the TV. I have the cable from the back of the camcorder s.der Video Players tried everywhere adapter, I get no picture on the fernseher.Was must be made on the connector on the back of the player are written? I am a total layman.
Antwort von Meggs:
What must be made on the connector on the back of the player are written? I am a total layman. for example, AV-in. It must be synonymous not necessarily a socket on the back of the VCR that is sometimes synonymous front. This can vary but depending on the device. Hast thou no instruction manual for your VCR?
So you synonymous a Picture on the Fenseher get the video of course synonymous s.den Television connected. VCR output>> Input TV.
Antwort von thos-berlin:
You do not have nothing on the VCR or the existing connections written. This makes it difficult to give concrete help. Maybe help you with the following suggestions.
Variant 1: The VCR has a number of AV and / or Scart Connections
Television via the VCR scart s.den connected so that the signal from the recorder to the television can view it.
Well, at least one other port free.
On this connector to connect the camera now. At the port should have a name, eg AV2. With the remote control of the video exactly as the program selected.
If there is no videotape in the recorder is playing, the picture should now set the channel / input on the television to see, so in our case wünmschenswertertweise the Picture of the Camera.
Option 2: The VCR has only one (Scart) input
The antenna signal is usually determined by the Viderecorder "looped through" to the television, so you both with the Fenseher as synonymous with the VCR can record TV programs. Specifically, this means that the antenna connector of the TV with the recorder's antenna output (RF out) and is connected to the antenna input of the recorder (RF-In) with the antenna (-nalnlage or cable). In this way the video plays "his program" - what he synonymous on the scart output to Television directs - as analog "channels" in the antenna signal. Usually happens on the 36th channel If a program button on the television on that channel is set, the video picture should also be seen (possibly seek tuning).
The camera then s.den single input of the recorder.
Problems to scart connections:
If you have a device that does not have scart connector (eg RCA Connections) with a SCART connection, then an adapter is required.
The Scart connector can be transferred bidirectionally, that is, in both directions. Therefore, there is the adapter in three copies (input, output, both). If one with an adapter for an input signal an output tap, nor does it wish to, as vice versa. The adapter is a bit better for both directions (have a switch or six RCA Connections)
If you are with the scart plug a television show in the picture, you can at the same times with synonymous in the recorder Scrateingang go.
If one of the participating units an S-video signal processing, it may be in the wrong attitude to make black-and-coming. That would be the next site. First Picture on skin get ...
Antwort von snegowik:
You do not have nothing on the VCR or the existing connections written. This makes it difficult to give concrete help. Maybe help you with the following suggestions.
Variant 1: The VCR has a number of AV and / or Scart Connections
Television via the VCR scart s.den connected so that the signal from the recorder to the television can view it.
Well, at least one other port free.
On this connector to connect the camera now. At the port should have a name, eg AV2. With the remote control of the video exactly as the program selected.
If there is no videotape in the recorder is playing, the picture should now set the channel / input on the television to see, so in our case wünmschenswertertweise the Picture of the Camera.
Option 2: The VCR has only one (Scart) input
The antenna signal is usually determined by the Viderecorder "looped through" to the television, so you both with the Fenseher as synonymous with the VCR can record TV programs. Specifically, this means that the antenna connector of the TV with the recorder's antenna output (RF out) and is connected to the antenna input of the recorder (RF-In) with the antenna (-nalnlage or cable). In this way the video plays "his program" - what he synonymous on the scart output to Television directs - as analog "channels" in the antenna signal. Usually happens on the 36th channel If a program button on the television on that channel is set, the video picture should also be seen (possibly seek tuning).
The camera then s.den single input of the recorder.
Problems to scart connections:
If you have a device that does not have scart connector (eg RCA Connections) with a SCART connection, then an adapter is required.
The Scart connector can be transferred bidirectionally, that is, in both directions. Therefore, there is the adapter in three copies (input, output, both). If one with an adapter for an input signal an output tap, nor does it wish to, as vice versa. The adapter is a bit better for both directions (have a switch or six RCA Connections)
If you are with the scart plug a television show in the picture, you can at the same times with synonymous in the recorder Scrateingang go.
If one of the participating units an S-video signal processing, it may be in the wrong attitude to make black-and-coming. That would be the next site. First Picture on skin get ... First of all thank you for your efforts! Well, I declare it quite slow and understandable.
Television 1.Mein has two scart connectors EX1 and Ex2.
2.Mein video player has a Scartanschkuss Euro AV2 Decoder to connect with a pay TV decoder or another VCR and a further connector Euro Scart AV1 AUDIO / VIDEO (VCR OUT A-+ / DVD-OUT.
3.An the front of the player are the video jacks IN jack (marked yellow), and two audio jacks IN (LCR) jacks, one of two white gekennzeicnet ist.Alle information from the manual.
My camcorder cable to connect s.den player has two banana plug, of which the yellow and the other white.
On the back of the player are located is 9 jacks:
VIDEO / AUDIO OUT (Left / Right) (DVD / VCR OUT); COMPONENT / PROGRESSIVE SCAN VIDEO OUT (YP Pr), AUDIO OUT (Left / Right) (DVD OUT ONLY)
These are the wichtigsten.Wo I have now my two Bananstecker cable from my camcorder s.den player connected so that the recording on VHS works? I must say that I do not live in Germany and therefore the channel 36 is not acceptable .
Antwort von thos-berlin:
As your VCR has multiple connections, we need the variation of the "Channel 36" is not next track (incidentally, the channel would be set ...)
Connect the VCR with scart to s.den Television. VCR AV1 s.EX1 of Euro TV (EX2 is synonymous, is synonymous no preference.)
Television on EX1 (or EX2) command.
Check Absielen by a tape or a TV Choice (s.Recorder) whether the connection works. The television should be the Picture of the video show.
If yes, then go next. The "banana plug" should be the usual RCA Male to. In general, the yellow Male Video and the white (and if any of the red) for audio.
Now the camera with the RCA plugs s.den recorder. This connection s.der Front advantage. Yellow times the Camera in the yellow socket, stepped into the white jack white, red remains free.
Your VCR is stereo, mono only your camcorder.
Thus, the sound of the camera but only on the left / white channel. Maybe you besogst electronics retailers nor a Y-cable with one RCA coupler and two plugs. Then you can give the White Male in the coupling of the adapter plug and the times in both the white and red jack s.Recorder.
But this is only one secondary. We care only once around the s.sich recordings.
Switch the Camera an AND let there either walk or take tape (if any) the lens cap. The camera returns now a Picture. (Is it in the camera viewfinder control).
Now s.Videorecorder (!) As a "program" the video input of the front page (possibly in the recorder running Videokassete stop).
On the television should be the Picture of the camera to be seen. If yes, Dun can now simply a blank in the Video recorder and the recording button ...
PS Just for safety's sake: The sound should certainly be synonymous to hear ;-)
Antwort von snegowik:
As your VCR has multiple connections, we need the variation of the "Channel 36" is not next track (incidentally, the channel would be set ...)
Connect the VCR with scart to s.den Television. VCR AV1 s.EX1 of Euro TV (EX2 is synonymous, is synonymous no preference.)
Television on EX1 (or EX2) command.
Check Absielen by a tape or a TV Choice (s.Recorder) whether the connection works. The television should be the Picture of the video show.
If yes, then go next. The "banana plug" should be the usual RCA Male to. In general, the yellow Male Video and the white (and if any of the red) for audio.
Now the camera with the RCA plugs s.den recorder. This connection s.der Front advantage. Yellow times the Camera in the yellow socket, stepped into the white jack white, red remains free.
Your VCR is stereo, mono only your camcorder.
Thus, the sound of the camera but only on the left / white channel. Maybe you besogst electronics retailers nor a Y-cable with one RCA coupler and two plugs. Then you can give the White Male in the coupling of the adapter plug and the times in both the white and red jack s.Recorder.
But this is only one secondary. We care only once around the s.sich recordings.
Switch the Camera an AND let there either walk or take tape (if any) the lens cap. The camera returns now a Picture. (Is it in the camera viewfinder control).
Now s.Videorecorder (!) As a "program" the video input of the front page (possibly in the recorder running Videokassete stop).
On the television should be the Picture of the camera to be seen. If yes, Dun can now simply a blank in the Video recorder and the recording button ...
PS Just for safety's sake: The sound should certainly be synonymous to hear ;-) Have I done so, as you described hast.Auf EX1 can I get the image of the Video on the television, but the Picture of the camera have only nicht.Ich Picture and sound of the camera on the television, when I turn the television to AV RESTRICT, but since working on the Video Studio do not.
Antwort von thos-berlin:
3.An the front of the player are the video jacks IN jack (marked yellow), and two audio jacks IN (LCR) jacks, one of two white gekennzeicnet is I had understood that the VCR has this connector. Therefore:
Now the camera with the RCA plugs s.den recorder Do you have the Camera really s.den AV port on the recorder (!!!!!) connected?
Just as you write it, you have the camera connected s.den Television ...
The camera belongs s.den recorder!
Antwort von snegowik:
3.An the front of the player are the video jacks IN jack (marked yellow), and two audio jacks IN (LCR) jacks, one of two white gekennzeicnet is
I had understood that the VCR has this connector. Therefore:
Now the camera with the RCA plugs s.den recorder
Do you have the Camera really s.den AV port on the recorder (!!!!!) connected?
Just as you write it, you have the camera connected s.den Television ...
The camera belongs s.den recorder! Sorry if I write to you so late, but I was at work as you write hast.Also I have tried all the jacks s.Viodeoplayer with the yellow and white Male kamerakabels.Ich I get nowhere I Picture.Wenn a TV set to AV RESTRICT and then the cable s.der Page of the TV picture and I Sound.ich knows that the cable I s.den recorder must be synonymous, I have done on the front page, as you've written etc.aber vain without Resultat.Ich previously had an older video player, but only for VHS, I have no kombinierter.Dort even on normal AV of the Video Camera to record können.Deshalb, I do not understand why this is this player can not geht.Du me yes times your e mail, then we could better entertain, I want meinen.Meine email is ulli@inbox.ru.Ich myself live in Estland.Vorher I lived in Berlin.
So, I wait for your post s.meine E Mail.Vorab again many thanks for your valuable help!
Gruss
Ulli
F
Antwort von thos-berlin:
From the Manual for DVP3350/02 (I hope it fits)
If right of the SCART or RCA jack
should be repeated the INPUT button
press until the desired connection is displayed.
AV 1 for recording of the EURO AV1 SCART socket
on the back of the device.
AV 2 for recording of the EURO AV2
AV 3 for recording of the VIDEO IN connectors and
AUDIO IN (Left & Right) on the front of the
Device. So in your case, AV 3rd
Have you already tried?
Antwort von WideScreen:
3.An the front of the player are the video jacks IN jack (marked yellow), and two audio jacks IN (LCR) jacks, one of two white gekennzeicnet is So with a player you can take nothing .....
Antwort von snegowik:
From the Manual for DVP3350/02 (I hope it fits)
If right of the SCART or RCA jack
should be repeated the INPUT button
press until the desired connection is displayed.
AV 1 for recording of the EURO AV1 SCART socket
on the back of the device.
AV 2 for recording of the EURO AV2
AV 3 for recording of the VIDEO IN connectors and
AUDIO IN (Left & Right) on the front of the
Device.
So in your case, AV 3rd
Have you already tried? Thanks, I'll try it now, then I write you the result!
Antwort von snegowik:
[quote = "thos-berlin"] From the manual about DVP3350/02 (I hope it fits)
If right of the SCART or RCA jack
should be repeated the INPUT button
press until the desired connection is displayed.
AV 1 for recording of the EURO AV1 SCART socket
on the back of the device.
AV 2 for recording of the EURO AV2
AV 3 for recording of the VIDEO IN connectors and
AUDIO IN (Left & Right) on the front of the
Device. So in your case, AV 3rd
Thanks for your help and your good advice! You've really helped! With your variant "If the right of SCART or RCA jack
should be repeated the INPUT button
press until the desired connection is displayed. "it now works! Again many thanks for your valuable help!
Antwort von thos-berlin:
Prima, a lot of fun while dubbing.
Antwort von snegowik:
Prima, a lot of fun while dubbing. Thanks again and good luck!
