Frage von ewu:
404ERR
Antwort von Jan:
The topic was here a few weeks ago and think I was clear - perhaps you will find the search with the thread - or SR 1 TV output problem ...
For my feeling was the SR 1 material on the synonymous component cable pretty well and in about the same. The digital HDMI brings a little more sharpness and better motion resolution, who own the Sony Surround Sound wants to hear, but must use HDMI, Kompier only in stereo.
VG
Jan
Antwort von ewu:
Hi Jan,
maybe I'm too stupid to look for it, but I find nothing about the problem.
That interested me, however, burning, why the HDMI output with poorer quality. If you know the thread where it was resolved, then call me the title where I can read about it.
Have the problem that I know about the RGB / DVI TV, I get a perfect picture quality 1080i, but have no way to transfer audio. Television has a digital Toneingang but no digital output SR1.
Thanks uwe
Antwort von alvaro:
Hello!
Did my SonyHC3 the same problem!
Perhaps one has a tip?
mfG
alvaro
Antwort von Jan:
I must find the thread now did not quickly found, it was possibly synonymous to the HC 3, the similarities aufweisst. They had the same problem.
VG
Jan
Antwort von Ethan:
hmm,
can the problem with the HC3 not confirm.
gruß cj
Antwort von Jan:
I've synonymous full Resolutionper HDMI, have no idea what you adjusted is. Possible interpretations of the material Television wrong? Because of the thread I'm looking again.
VG
Jan
Antwort von Jan:
Here it is:
HC 3 Page about the middle of the second gehts los - reason - the love television ....
VG
Jan
Antwort von ewu:
Thank you for searching, but so far I can not with the thread start. I think the problem is still not resolved.
The input s.meinem LCD DVI is the same for which I use both outputs SR1, once RGB, as is the Resolution1080i and the HDMI output of your camcorder 576i. To my knowledge, I can not adjust s.der SR1 what Resolutionbei affect both outputs.
Now I would be interested in burning where the problem lies, s.Television definitely not. Sonyhabe From the information I receive, I should but my SR1 bring to a repair service. Can it really be that the HDMI port has a starting problem?
My connection cable HDMI / DVI is s.DVi Stecher 19 +1, which is now the difference with the DVI cable with 24 +1?
VG Uwe
Antwort von Jan:
I am amazed but very experienced filmmakers like Peter Bruno, a picture in full resolution provider. I must admit I have a Philips LCD synonymous Television had the main test. Philips is in a little over ¬ 1000 LCD a top class company.
Very bomb-proof but it seems not to be the fault of television never has:
Antwort von firlefanz:
yes maybe times when media markt / saturn ect.
s.einen full hd tv hängenund check.
gruß cj
Antwort von ewu:
Good then I will still synonymous something to try.
Sign me next week.
The new HDR-SR1, I have already tested, it still does not.
VG Uwe
Antwort von Jan:
So today I did look at the SR 1 in the shop checked (This shows the Television):
Sharp LC 37 RA 1 E - 1080 / 50i
Phillips TV 32 9551 - 1080i - Very Good Picture
SonyKDL AE 40 W 2000 - 1080i (Full HD Television)
Panasonic Plasma TH 65 PX 600 - Pana comes in "widescreen", I could not rausbekommen exactly what that means (my TV colleagues knew it not exactly), I assume 1080i - the picture was like a bomb 65 "(165 cm) 10,000 ¬ - Even better was the SonyHDR FX 7 (20x optical) with the part that I was a cable which is 30 m away was to see Farbkontakte (sharp!)
It must therefore lie either s.TV or s.der firmware for Sony / an older model.
VG
Jan
Antwort von ewu:
Have as yet another suspect, suspect the cable is the problem.
The cable with which I RGB signals has s.Kontakten
s.DVi port 24 +5 and the HDMI cable which I used
has 18 +1 s.DVi connection. Now, I have ordered a new cable
with HDMI / DVI 24 +5 but.
Hope it goes, otherwise I will not even next.
VG Uwe.
Antwort von Jan:
A combi-cable, then perhaps?
Yes HDMI cables are not cheap, NEN 20 is already expensive.
VG
Jan
Antwort von Kabel:
Hi Jan,
You've probably with an HDMI / HDMI tested?
My television has a DVI input, which I hope with the
24 +5 times the problem can be resolved.
mfg Uwe
Antwort von Jan:
Yes it must probably be due. I have a 25 ¬ HDMI to HDMI cable is used. But I am unfortunately not the cable TV Freak, but I could imagine. Actually, here's a couple of television experts who should know.
If the television is not the newest, but can s.ihm are synonymous.
VG
Jan
Antwort von ewu:
Still have not found the appropriate adapter to the
HDMI output of the SR1 to DVI input of the LCD
Picture in the 1080i Resolutionzu transferred.
It is a disaster for what it is all cable and adapter there and what
Prices given for responding.
Bin next to the search and give no more until I get a restless
Solution found.
VG Uwe
Antwort von ewu:
Hello,
the situation is now so that there is no way
the SR1 on the HDMI output s.einem Television with the
older DVI input to operate.
So the only alternative that component cable to use.
And I've convinced that the quality of
Transmission through the YUV little of HDMI is after.
VG Uwe
Antwort von Jan:
The components connect with the SR 1 is really quite close to HDMI. really amazing. Failure to use an HDMI cable is unfortunately synonymous to a waiver of the 5.1 sound, but you can endure ....
VG
Jan
Antwort von ewu:
A specialist in market Maxi told me that
at the Japanese no HDMI transmission, which
would be all about components, is the right way?
You know you yet, or?
To reinforce his statement, he showed me a 37 "LCD
with a film of hard drive, transferred with a component cable,
the brilliance of this play is hard to describe, simply
gigantic.
Antwort von Jan:
In Japan, I know less of me ....
My television is so lala knowledge - so what you hear.
But a camera with built-in HDMI Male to work in the home country of the company - can not believe ...
Via HDMI I have a little more sharpness seen, especially in movement, but was minimal.
VG
Jan
