Frage von maverick:
Hi! I've even no cam yet, but playing a little with the possibilities of video editing (and synonymous with the idea to me someday too care;)
at the moment I've a few examples of HDV from the inet loaded, and would like to see what a little bit so that everything goes ... very important for me is deinterlace, because I later synonymous for PC wants to cut.
I've now www.100fps.com this tutorial to deinterlace found that for normal DV .. thought is unfortunately used in VirtualDub, and since the problems to begin:
VirtualDub can not read mpg's, and breaks with an error.
with google I found a modified VirtualDub, which is synonymous mpeg2 plays, but unfortunately not what I need if I have a HDV file, is any indication that the profile of the file to a transport stream and adapts it to hire not be decoded correctly ..
and actually, I see all files with just a green building, with a few blocks: (
the search here in the forum seems not so much to bring to daylight, I think, at least no contributions to the subject .. either I'm just too stupid for this, or the only one that wants to try?
So if there is any way, with vdub HDV editing, or perhaps synonymous better off, these super-deinterlacing method with freeware to try, I would be delighted if you would tell me about it!
thx in advance
julian
Antwort von der_kleine_techniker:
Garnicht.
Look, if you get the Ct 26-2006. Since there is an article for HD editing.
Antwort von Quadruplex:
VirtualDub can not read mpg's, and breaks with an error.
Antwort von maverick:
Garnicht.
Look, if you get the Ct 26-2006. Since there is an article for HD editing. that would of course be very bad ...
Using VirtualDubMod - which makes the HD MPEGs without murmuring on. Unfortunately no, I'm just in so much as with the vdub for mpeg2 .. either green or blocks it opens nix. neither. mpg yet. m2t
Antwort von Quadruplex:
Unfortunately no, I'm just in so much as with the vdub for mpeg2 .. either green or blocks it opens nix. neither. mpg yet. m2t For me funzt's ... Are the videos with the usual suspects (VLC, Media Player) to play for?
Antwort von maverick:
yes, actually! with wmp with restrictions (no sound) but I think this has nothing to do with it ..?
Incidentally, there are the files and fxsupport of a Japanese page on the HV10 was tested.
Antwort von Gast 0815:
Do you have a link to such a file?
Actually, this should be something with the Mpeg2-capable versions of Vdub go smoothly. But if you have more than just movies (hard) want to cut, do you long for is not a commercial program around, with Vbdub much you can really make things synonymous, with those editing programs can not cope, but films so completely to work on long but plenty uncomfortable. Also look in this context, synonymous quiet times, the trial versions of different editing programs, which are all temporal or functional restrictions, but for a first impression of their capabilities (synonymous in terms of deinterlacing) well enough.
In the open source / freeware sector would still Avisynth with its numerous filters (synonymous very good for deinterlacing) in question. But because of the complicated scripting to handle than a Vdub and may FrameMaker Server synonymous of other programs. The server Avisynth.org of the moment still seems to be down, but there are as synonymous here: http://www.free-codecs.com/download/AviSynth.htm
A brief overview of the capabilities of the program are as: http://www.zisoft.de/video/CaptureGuide/AviSynth.html
Greetings from Marburg
Antwort von maverick:
Hi!
So I had of them downloaded here:
http://fxsupport.de/11.html (Of course, the HC3)
and then here: http://videosan.web.fc2.com/HV10docs/index.html
(canon HV10) .. hab synonymous in the renamed mpg, well above the results ..
yes I will if I hab erstmal ne cam and was so synonymous usable've filmed, Premiere Elements, or buy it, but until then I will stop just as I look forward to at least free with a bit of what rumschrauben can be up to the cam .. it takes really not for a little while! elements can also not so good so you can deinterlace, otherwise there would not be so synonymous nor plugins of which cost more than the part itself. or?;)
AviSynth with me then I think a little too hard, I get when I hear skriperstellung already not a good feeling ..
well if you have the files in vdub but go, so it is perhaps s.mir, mal sehn ..
Antwort von Gast 0815:
I just had one of the files downloaded, but it's mpeg4 encoding, ie Vdub (including the mpeg2 versions) this format may be only a detour on the Avisynth script read.
Alternatively, you may at times MPEGSreamclip (http://www.mpeg-streamclip.com/home-frame.html) into AVI format and convert it into Vdub capture.
Greetings from Marburg
Antwort von Gast 0815:
Sorry, just because I've prescribed, the file is an mpeg2 transport stream ..., but nothing changes s.den other statements.
Greetings from Marburg
Antwort von Gwendolyn:
hi, I have now again a few hours spent with the persuasive, your program that I absolutely want to install quicktime, then I have it with another converster tried to, while there has been done, but then missing the codec AviSynth again .. I I think for the first GEBS and do after the holidays next .. but am a bit frustrated that it is so complicated with all the conversions;)
but thanks for the effortless, at least now I know not how it goes;)
Antwort von Gast 0815:
If it's just about the reading goes, this is relatively simple:
First you install the FFDshowfilter (http://sourceforge.net/project/showfiles.php?group_id=173941) as a decoder for the video portion;
then for the Audiotei nor the AC3 filter (http://sourceforge.net/project/showfiles.php?group_id=66022&package_id=63808).
Another You still need Avisynth.
Now you create with the editor (not with Word, etc.) a new file with only one line:
DirectShow source ( "C: \ PfadzurDatei \ beispiel.m2t")
Drive, File and path to the file name you replaced according to your circumstances, but the quotation marks are retained. Then you save the file with the extension. Avs (or rename the file to then).
In Vdub you now open this AVS file just like a normal movie, that's all .. (trau Dich, looks harder than it is!)
Greetings from Marburg
Antwort von Gwendolyn:
with the capture even geklappt hats, even without the filter installed (which had probably been there ..?).. works but now the whole deinterlacing sache nich. if I save uncompressed War I only a black file, and compressed vdub denied the service, then it will start to render nichmal quite complicated .. the whole .. I know whether this nichmal deinterlacer in the tutorial at all for HDV is ..
Antwort von Gast 0815:
As for what you want to save your movie? Uncompressed you can in any case for longer movies on unsustainable, because the file is too large.
Otherwise, describe me, what you exactly with the film employed in Vdub searched.
Generally, the video-editing like this (absolute short form with no audio):
Film capture, video -> full processing mode, movie cut, video -> Filters (desired filter with "add" to select), Video -> Compression Codec want (for the 1.Durchlauf) to select and adjust, save with F7 ( in more than one pass in the box "Do not run ..." box). For 2-pass encoding codec then again and again saved. If the computer is not in use eg over night with F4 encoding run.
Greetings from Marburg
Antwort von Bernieman:
hi, to the shortcuts I've done the same way. even without compression, there is obviously a giant. avi escaped, and as I said it was black. and then tried with divx, but since I do not kontte click on save, or if I've done, was any error message that the codec does not cope with the input or so .. now I've unfortunately not recorded ..
Antwort von Bernieman:
404ERR
Antwort von Archimedes:
As far as I have understood you, you can keep the movie in VirtualDub consider. Can you synonymous gradually move through the video (of frame to frame)?
Why do you want to deinterlace at all? Be aware that the deinterlacer is always with a - more or less important - the loss observed. Deinterlace is a science in itself and will be used carefully.
If it absolutely must, then I would AviSynth with it - either with LeakKernelDeint (order = 0, threshold = 6) or with TDeint (). Both deinterlacing methods provide nearly the same results, with LeakKernelDeint () represents the faster variant. Even better was the MvBob with (). SelectEven (), but the deinterlacing takes a "half eternity". Hence my recommendation s.dieser body: LeakKernelDeint (order = 0, threshold = 6).
Otherwise, I would say that an interlaced video, if possible synonymous interlaced encoded. This is synonymous halt of the options from the respective encoder. The x264 encoder support, for example, no interlacing, Nero Recode 2 but it is.
Antwort von Bernieman:
archimedes hi, please do not kill me here with grasped;)
I want to deinterlace, because on the pc sees things simply not good appearance. this chamber design nervt halt huge! if I vlc with "bob" one telle, it looks even better. but I would like the method "bob + weave" a try, because in the tutorial up there as the best description of what you can do so. maybe I'm like this then synonymous disappointed and will leave it entirely, who knows ..
if you are already grasped with AviSynth of only thee schemeißt so, can you tell me synonymous, as I made this for my answer then file a script do?
that it would take half an eternity to me is no preference, I've only a few seconds material. earlier, the encoding, what went wrong, 40 minutes for 500 frames time .. so I have enough time ..
Antwort von Archimedes:
if you are already grasped with AviSynth of only thee schemeißt so, can you tell me synonymous, as I made this for my answer then file a script do? A simple example could for example look like this:
DirectShow source ( "video.m2t", fps = 25)
LeakKernelDeint (order = 1, threshold = 6)
As far as I know, the Halbbildreihenfolge in HDV videos "Top Field First" (order = 1). It is recommended that synonymous take a look at the documentation to throw.
Antwort von go4java:
hi, if I run this script with vdub now wants to open, it says "I do not know what * file name * is" and breaks off ..
Antwort von Archimedes:
LeakKernelDeint () must of course be installed (the file must be LeakKernelDeint.dll into the AviSynth plugin directory to be copied). The file "video.m2t" have you adapted to your needs?
http://forum.doom9.org/showthread.php?s=&threadid=81322
Antwort von go4java:
this is very embarrassing to me now, but I find no plugin folder in AviSynth .. hab times a "plugin" and a "plugins" folder and creates the strong link of your unpacked but that changes nothing. the filename of course I've adapted
Antwort von Archimedes:
AviSynth Which version did you install?
http://sourceforge.net/projects/avisynth2/
The subdirectory is called in the AviSynth way, "plugins". You install a plugin into a different directory, you must notify the AviSynth (in script). If the file "LeakKernelDeint.dll" in the subdirectory "plugins" and you have at least version 2.5 installed on your system?
Antwort von wolferl69:
I've pulled the latest version, and synonymous NEN folders "plugins" referred to both nix has brought ...
Antwort von Archimedes:
I have the above example, the file name without quotes hingeschrieben (but have now corrected). Filename must naturally be in quotes. This is synonymous to the reason for your error message have been.
Antwort von wolferl69:
yes, much better ..
now he says "script error: there is no function named" LeakedKernelDeint ""
in which folder should be because the AviSynth plugins folder for purely ...?
Antwort von Archimedes:
The sub-folder is located in the AviSynth directory.
Example: C: \ Programs \ AviSynth 2.5 \ plugins
There must be synonymous, the File LeakKernelDeint.dll "position.
Antwort von Gast 0815:
Normally you should be in the folder of the Avisynth plugin folder eg the following folder structure:
C: \ Programs \ Avisynth 2.5 \ plugins
If your plugin s.einer elsewhere, enter the absolute path to see eg:
LoadPlugin ( "D: \ path to file \ Plugin.dll")
Paths in quotation marks should always be set, otherwise apply the old DOS limitations.
Only after loading the plugin, you can use synonymous ...
To deinterlacer in Avisynth, you can choose several plugins available, that is often used and usually provide useful results, read in any case, the first enclosed Docs / txts (synonymous to Avisynthanleitung is quite useful!).
Even the codec problem in Vdub: with that resolution coming Divx / Xvid not cope, do you want to use it only remains Resize (I personally think in this case is not reasonable); remain x264, which is feasible but not in the Avicontainer squeeze, but what else Vdub yes, there is not sufficient; also must Vdub man with an older version of x264 to use because the vfw version that works under Vdub no longer maintained. So I would with the AVS script rather with MeGUI (http://x264.nl/) in order to continue working as an encoding with Vdub.
Greetings from Marburg
Antwort von wolferl69:
funny, my folder structure is actually the way you did it is called ... ok, so ... MeGUI werd erstmal with me then employ, thx ...
Antwort von wolferl69:
Now, I hate my new program found: MeGUI: (
not only that there is already open in the crash, wants to update, but it does not, and is synonymous crashing his own trail indicating wrong (there are at least to 15), and somehow totally incomprehensible, no, it has given me in the last 20 minutes synonymous, most error messages in my life brings. it seems simply not to know what I want. and I know not what it wants. I think the part overwhelmed me ..
Antwort von Gast 0815:
Well, quite simply, the part will certainly not synonymous, I tasted some s.Zeit until it ran ...
Otherwise look StaxRip times (http://x264.nl/), but the PRG does not avs script s.and can only some internal Avisynthfunktionen, maybe you like the yes synonymous.
In addition, you could have with the CLI version of x264 encoding, but is synonymous cumbersome to use manual to see Selurs: http://www.flaskmpeg.info/board/thread.php?threadid=5571
You can watch synonymous times MPEG Streamclip. Would the easiest tool for cutting and coding according to mp4 (without Avisynth, apple codecs). How much you like the Deinterlace function when encoding goes, you should decide for itself. Read the tool times hhttp: / / forum.gleitz.info / showthread.php? E4f9d17b05a3d7259bb17a0226811665 s = & t = 27727:
is synonymous to find the link to download.
Greetings from Marburg
Antwort von Bamboo:
without AviSynth, that sounds good;) werds times I read through tomorrow, thx ..
Antwort von Bamboo:
Now yes, I've decided that I have at the moment is too much frickelei. would not have thought of everything so that it will be cumbersome, and now I have so much synonymous frust experiencing the pleasure that I passed. I will probably need to arrange a camcorder capable of a progressive, and then stop recording for pc in P drehn. thank you for your effort, at least what I've learned about video codecs;)
julian
Antwort von der_kleine_techniker:
I just do not understand why you were not my tip from the beginning of the thread and you've used one of the HDV-enabled purchasing programs have worried.
Then everything would be done.
Antwort von Bamboo:
yes, true is synonymous then a possibility. but everything after the series. how was the book yet, where the young had only ne horn to her and then a moped got?;)
