Frage von johannes79:
Hi,
First, I must say it is my first cam, so I'm bloody Beginners. Now for my (my) problem (problems);
So I capture with HDVSplit, recording format is HDV, connected via Firewire. Now, however, the Cam HDVSplit or not as I want and while breaking HDVSplit the Capture s.with of message;
INFO: No more data is received from Camcoder. Capture stopped.
End of capturing
I do not know what it is. Hope someone here can help me.
Now to my second problem.
When I (once) had managed to capture a part of me and then on the pc that was I had to find that I violent movements in Schlieren (queer) saw. It was only when I've moved the Cam (not necessarily quickly tend to be cautious), if I had kept it quiet was the Picture 1a.
Perhaps the simple solution to the problems, I zermartere me but since a few days' head and google me somehow synonymous can not really help.
I thank you in advance in advance:)
mfg
Hannes
Antwort von darg:
The question is, how did you aufgnommen of the tape where you want to capture? Do you have something with the cam rotated, rewound, and viewed it then next filmed without the "End Search" to make? Then you have no continuous timecode on the tape. Each interruption shall HDVSplitt than the end of the tape. For HDV and especially in the HV10/20/30Modellen is the ectremwichtig either never recorded on the cam to stop or end to Search.
It may be synonymous, that HDVSplitt aborted before it even starts because the tape was rewound something next, where the time code has not yet begun.
HDVSplitt looks like an easy thing but the software has really bad hook insich. I like it synonymous, but because it can not use Sony Vegas and man must know what we make.
In summary: Tape record and always consistently not rewind it and watch without Teilscenen End Search afterwards. Preview eleminieren, which eats at the calculator and can lead synonymous.
Greeting
Axel, San Jose
Antwort von wolfgang:
I like it synonymous, but because it can not use Sony Vegas and man must know what we make.
There is now a patch that fixes this problem.
http://www.videotreffpunkt.com/thread.php?postid=114709 # post114709
Antwort von johannes79:
So should I use the link now? * I am a little confused * I have not rewound, it is still not: (
Antwort von wolfgang:
Nee, who was thought Axel.
You should be relevant to our times reveal things - which device is actually, you have even a different PC Firewire-Kabel/einen other attempts? Ever thought other than just trying Programs HDVSplit?
Antwort von johannes79:
It is a HV30 with a FireWire connection, have already tried several cables, always the same problem.
Antwort von wolfgang:
And what an OS is your PC? XP? Vista? What Service Packages?
Antwort von johannes79:
Xp pro, Service Pack 2
Antwort von wolfgang:
And you'll find the camcorder after reinitialized
in HDV mode in the device management as a / v tape device or not?
Antwort von johannes79:
no unfortunately not, I hear the "sound" when on / abstöpseln but find him nowhere, he is not synonymous of zb. Ulead VideoStudio found / addressed /
Antwort von wolfgang:
You'll find this in Device Manager, and under "Audio - Video - and game controller" is "AV / C tape device" if an HDV camcorder via firewire s.System has been connected, and if it is recognized correctly.
The ping would be an indication that this is probably ok - but look is better!
If you find the entry, you know that it does not s.Camcorders, cable or PC is - but then it's probably a software problem. Do you find the item not to be the error in the field of camcorders, cable or PC to search.
Antwort von Musashi:
Hi,
times I had a similar problem with the recognition of my HV20 in HDV mode. In DV mode, the HV20 in "My Computer" listed, but as soon as I on the HDV mode switching the display disappeared and the synonymous editing program (Pinnacle Studio 11 Ultimate) could not find a camcorder, though the "ping" when a - and Ausstöpseln could hear. I know the solution is not
quite accurate but it was, at least in my particular case, s.der sequence of connection or the program opening.
At best, you are trying times following variants:
1. Initial editing program open, then connect camera, then turn on Cam (Play mode).
2. First Camera connected and switched on, then open.
3. Computer, connect camera, calculator again to boot.
To always be in control of the workplace to see whether at least the camera was recognized by the calculator.
Bei mir hat's helped.
Antwort von wolfgang:
Note however, that the application as HDV devices varies, to register as a DV device.
Antwort von darg:
2. First Camera connected and switched on, then open.
3. Computer, connect camera, calculator again to boot.
2 and 3 should be vielversprechendsden. The point is that the application for the Cam before opening the software to be made. The software looks at the start always in the equipment list to see who or what is connected.
Gruss
Axel, San Jose
Antwort von johannes79:
* To be happy,
I thank you for the detailed help and can cheerfully say: I've done it. The first problem (of Cam will capture tools are not detected) was s.der Firewire card. Since I am something as obvious problem with the simplest way of examining what I saw a new purchase. Behold it was.
Now came still add that I shoot in HDV with the problems had since none of the tested Capture Tools Cam found. Stubborn as I am now, I could not leave the room. I would have the simple way I can go and buy a different cam with some good friends is super knowledgeable. I wanted to, but not.
So I went with the problem on the track and found that if I am in DV movies, the Cam synonymous detected. For me, the way, Cam under "imaging devices" in Device Manager (even with nearly full term "Canon DV camcorder)
Now remained only one problem. The poor image quality did not call me and I am a thread of synonymous "Martin Steinmann" (you probably will not say) of this good man has, as far as I can see now, Canon drew attention to the HV 30 required a firmware update because the Picture erolgreichem after capturing of looks like a webcam with 640x480 resolution, very grainy and certainly not reflect what the HV 30 it really has.
So what did I do? Exactly. Cam connected via USB, MINI SD formats, update on the card played, connected, updated.
My joy must synonymous cry the neighbors heard. After 2 weeks intensive efforts, toss the manual, browse in several different forums and almost nervous breakdowns my wife (and me) I finally managed.
The picture is top class.
I do not know if I use the link here so may post, but I think it is all good and so I wear it mal ein.
1.0.0.0 firmware to the latest 1.0.1.0
http://www.canon.de/Support/Consumer_Products/products/camcorders/Digital/HDV_series/HV30.aspx?faqtcmuri=tcm:83-538497&page=1&type=faq
You've helped me very still and it has shown me again the man with stamina very often comes to your destination:)
mfg
Hannes (which is now extensively his new favorite toy tests)
