Logo Logo
/// 
Hilfe !! Meine XL1s wird nicht erkannt !!

Help! My XL1s is not recognized!



Frage von matthew:
August 2005

Hi Folks,

My XL1s is not recognized via firewire s.PC ... there is nothing, nothing at the calculator, it does not appear synonymous Ballootip window, and in Device Manager synonymous nothing is displayed!

Lie at the interface itself can not do it yet, because my old D8 camcorder is synonymous recognized ..

Is the cam broken?

I must say that it had only been 2 months, she was needed, the owner seemed (I was there personally to be) very good care deal with that part, because they were usually synonymous not see any signs of use and so on.
Had contacted him shortly before, he could not help me, unfortunately, synonymous, why and why .. used because it s.einen beginning of Mni-DV recorder to warm up in the PC has.

And at first I could not remember when I had the camcorder connected PC s.den times already .. :-(

what to do?

matthew



Antwort von Miki:

Hello
Thou shalt watch whether the time is to be unlocked, not every camcorder is enabled in many cases you need to send to unlock
MFG



Antwort von GhostDog:

And where should I look for commands that?

stands next to the jack s.camcorder "in dv / dv out

player mode in the bottom right is always - no preference whether the cable is off or not - "DV-IN"

I knew in my d8 only if the cable into the jack was ..








Antwort von matthew:

Oopsie .. was not connected ... Of course, I was just ..



Antwort von Markus:

Hi Matthew,

Firewire will be enabled not only before a camcorder is recognized by the calculator. This is done only for devices that only have a DV output, should have input but synonymous with a DV ... ;-)

Look, if you come here the cause of the failure on the track:




Antwort von matthew:

I know ... I have not said yes synonymous ... although it works only synonymous net .. :-(



Antwort von Miki:

Thou shalt times synonymous s.den cable may think is not right
But what you should do, I do not know with what program you are working but who are you s.besten is programmed deinstalieres and then install the first to the Drivers and then the software
And connect all the first, the Canon XL1S
I myself have had this problem and with me, it has funktionieret



Antwort von matthew:

ahja because I just read there that maybe a loose connection of the cable can be ...

can / should this be because if my d8 camcorders so synonymous funzt?

Moreover, I have had with the same time, a cable already connected xl1 (without s) ... synonymous with no probs ..



Antwort von Miki:

instalieren then re-do the time
MFG



Antwort von matthew:

hm all right ... Parallel to the hats, not folded synonymous - there where I did the synonymous d8 camcorders never connected - but naja ..



Antwort von Miki:

Erlich to say I wanted you to be happy to help but I know it when the error is not synonymous
I did not proof it op so edwas in book else is, I'm going to look



Antwort von matthew:

yes, I know ... thank you that you want to help me ... I really appreciate to ...
I will now time to buy a new cable tomorrow, and maybe leave time to check whether the dv jack funzt .... if needed I shall have to send the camcorder to repair ..








Antwort von Miki:

I can tell you a tel number of benefit as a camcorder can give you time to ask what can be there



Antwort von matthew:

that would be class if you could give me the ...

but may do that "dv in" always dortstehen .... is that normal?



Antwort von Miki:

here
Dortmund 0231-528241
Cologne -0221-814437
Euskirchen 02251-860357
05232-990322 Detmold in Detmold, I have my camera synonymous reperatur had to call at the time,
MFG



Antwort von matthew:

lol ... not just my corner (bavarian forest) .. but okay ... dankeschön.

I might mention who recommended me? ;-)



Antwort von Miki:

thou shalt no, not me kene only the roars from Detmold, however, is no preference only time you ask what this could be who you want to bring your camcorder into reperatur then I find you a repair shop
register
until tomorrow



Antwort von matthew:

ok many thanks!



Antwort von matthew:

ahja, by the way I wanted to say that I understand the firewire interface using my Audigy2 ... that should do nothing but that no IRQ conflicts, etc. There ...



Antwort von Markus:

Hi Matthew,

You have (only a trial basis, no experience value) nor other Firewire interfaces s.Calculator, s.The You could connect the camcorder?

Attempts synonymous following times (if possible, that is suitable Firewire cable) to hand: Combine both your camcorder via Firewire and record a scene from one device to another. If this works, is not the Firewire port on the XL1s be defective.



Antwort von matthew:

so ... so that with the cables and the short circuit of the two cams I've already tried, of course, synonymous Funzt net .. :-(

@ Miki:
RECOMMENDED've spoken with your service people who knew me, but not synonymous help so right.

In the afternoon I was then directly with a (professional) Camcorders workshop. I have checked then the cam, and that confirmed to me that, but in fact the chip responsible for DV in / out was probably shot because of a static charge ...

So for me not sure ... synonymous now I know why the owner of the XL1 synonymous Setter had an external .. , - /

The technician said that was acting sowas) fairly often (but not limited to Canon, but unfortunately ists at Canon so that repairs can only carry out Canon ... and mentioned as an estimate of £ 300-400 ..

Well, it must import what hilfts ... just a little mini-DV camcorder for her ...

or has someone like that lying around at home?
Simply mail s.mich .. otherwise I have to go buy new ..

I need a canon model, if I want to play the frame mode of the xl1 synonymous in the pc? (I do not think so, because that's ready to cass ...) I thought maybe - because of the same manufacturer and so - s.The MV 700 ...

matthew








Antwort von Markus:

Hi Matthew,

There is new information:




Antwort von matthew:

comes a little late, I would say .. :-(

The camcorder is already about 3 years old, so I can probably do nothing to guarantee, etc. I think once ...



Antwort von Markus:

"Matthew" wrote:
comes a little late, I would say .. :-(

You complain with Christina ... she has posted just today! ;-)

Maybe your camcorder will be repaired or a gesture of goodwill, if you enclose when sending in a nice letter in which you reporting it like to have of this hidden defect obtained only now (with a consequent defect) knowledge ...

Good luck!



Antwort von matthew:

In any case try werds ... So email? no telephone? would be personal but not?

matthew



Antwort von Markus:

I think the phone is more personal than something like an arbitrary email. Especially since you are much more synonymous over the phone and can clarify (if you can get quite fond of) any tips on how and where you need to send the camcorder to get it repaired in a gesture of goodwill.




Antworten zu ähnlichen Fragen:
Help - Color Grading reagiert nicht - Resolve 16
Help! LUMIX S5, Ninja V and RIBBON HDMI cable...
media Encoder Timecode geht nicht, need help
F: DVB 2 DVD mit DVD-Patcher 1.06 (help me)
Help need with Software Engineer roles based in Dublin - C++, DVB, MPEG2
Nero 7 updat und Help
Apple Show time (not)
ZOOM F6 Audio Recorder / Do not buy !
Kinos weiter in Not - neue Studie macht Hoffnung, aber das Filmauswertungsfenster wackelt
Wenn du als Regisseur not amused bist.
Not just another drone shot...Epic shi* @ Extreme Mountain Biking
Pinn.Studio 9 - Install: ".DS Store" not found!
ProjectX v0.81.9-20041031 "Could not find the main class..."
PCTV Vision als limitierter Benutzer -> vision001.dll not found
Absturz der Software Terratec Cinergy 1200-DVBT unter Windows2000 als User: "" is not a valid integer value"
Konvertieren - Source Format is not Acceptable - Divx

















weitere Themen:
Spezialthemen


16:9
AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos