Newsmeldung von slashCAM:Hier geht es zur Newsmeldung: Hinterkamerafernbedienung building instructions for a Panasonic camcorder
Antwort von Jörg:
For people who know Page s.welcher the soldering iron gets hot, would constitute the replica of the remote control is no problem if anyone of these artists soldering remember, to assemble such a part, I would take his smooth another.
The charges we will be quick to agree ....
Antwort von deti:
... And if you want to solder something similar for a SonyPMW-EX1 / 3, attached gets the connection assignment of the so-called "Lens-Remote" connector. The caption should provide the experienced hobbyist halbswegs Instructions enough ;-)
Deti
Antwort von Wolle2002:
Great instructions. Dare me now even s.eine Hintercamerabedienung for NV-GS 400th Instructions of http://www.softweigh.com/video/diy.html. We'll see. All illustrated. Has anyone been rebuilt?
Antwort von r4z0r:
I would be interested to know whether sowas times someone has already built for the EX3 ... I can with the assignment that is not enough to start that it could create a remote control ^ ^
Antwort von deti:
I would be interested to know whether sowas times someone has already built for the EX3 ... I can with the assignment that is not enough to start that it could create a remote control ^ ^ yes, I do. It's simply:
- To zoom in pin 2
- Get out (wide) to pin 1
- Rein (Close-Up) to pin 3
- Resting position would be contrary to pin 4
With a 10kOhm trimmer / potentiometer as a voltage divider between pin 0 / 3 can be guided to the center tap to pin 2 in order to influence the zoom speed and direction with only a rotational movement (as is so synonymous with the remotes purchased).
- Loosen To start the recording pin 5 to pin 7, to end connection.
- Goes to the review function pin 6 7. short against pin
Done. Just incidentally, does the handling of Broadcast lenses synonymous with 8 - or 12-pin connector.
Deti
Antwort von buildyo:
Super instructions. I did not know that it's that simple.
Deti @: Thank you! When I now connected to pin 2 (ZOOM), an external voltage between 1.66 V and V 3:33 lege (Cons with pin 7 (GND)) then the camera would zoom in, or synonymous? I wonder why because I would like to control the whole of a microprocessor analog output.
Panasonic has the same tension?
Antwort von buildyo:
double posting
