Frage von cliffomalley:
Hi folks,
I have recently made recordings with my family.
This to me is just sufficient quality of the HV30's internal mic noticed. I decided now to buy a new one.
The decision was s.end my research on the Rode Stereo VideoMic.
Now it is with this so that it has no super directivity and not synonymous far out on the camera. You can hear the motor hum that is very clear (of course then synonymous only right).
I have a bit of research on the Internet and came across something.
The idea, I have tried to copy and expand somewhat.
With the results that I earn so I am very satisfied.
I wanted to hear your opinions and views maybe even improve it. Of course I want to help those synonymous feel the same noise as disturbing.
Of course, suffers from a bit of stereo effect underneath.
But really just a bit.
I have tinkered something together quickly and placed it on Vimeo online - see for yourself:
http://www.vimeo.com/11382077
Those who want to improve my English is welcome to attend. :-D
What struck me at the microphone is the bad decoupling.
Screw the camera on a tripod, you can clearly hear sounds when I touch the tripod grip.
Taking the microphone, regardless of the Camera in hand,
continue to hear the engine noise.
So the sounds are based less on sound body.
The cable is not touching the body of the camera.
Thereupon my actions.
Thank you
Greeting Cliff
Antwort von Jitter:
The recording of the drive noise has actually nothing to do with impact sound. special that will air on the Übetragung sound. I got your design views. Your insulation measures directly s.Laufwerk I do not think it somewhat problematic. At the microphone so that you degrading the sound. What one hears, of course, only if language or music is played. When atmo-sound one does not notice it.
The simplest solution is the microphone far enough to position the drive, for example, with an angular rail. You come out ultimately indispensable. If you are still too close to the Rode s.der camera lens. You can see the Fellhaare in the Picture. My next camcorder work must be absolutely silent, the only way to really solve the annoying problem.
Antwort von cliffomalley:
Hi jitter,
thank you for your feedback. A longer test will I do when I again have a reason to film. This will be the end of May, not late.
When the drive solution I have in mind something synonymous.
I'll think it over whether it should really be a permanent solution. The next recording will be in rallycross.
In testing here in the apartment with Headphones aufm head
I have yet to hear any real deterioration (votes before the Microphone and Music in the background).
What should occur next to a serious deterioration or loss? I notice the damping already when you consider the fur cap on the microcode. This is like a velvet bag with fur around it.
Once I have meaningful realistic images, I will express here.
Ds With the angle rail synonymous I have thought of already.
I am in the process synonymous already come to a Conclusion.
In some videos with SVM as a Microphone and angle rail as a solution,
it seems to INterview recordings so as if the speaker produces sound from left or right rather stand next to the Picture.
For this reason I have rejected the idea immediately.
I'm going to grow even a small tripod and a 2m jack Verlängerunsgkabel. For some situations which could then be a solution.
The hairs in the Picture, I've noticed. I have now fixed with a little hair spray. Let's see how long it holds and whether it affected the sound.
If one of the microphone about 20cm in front of the camera without him positiniert auzuziehen while the fur cap, you can hear the camera motor continues.
Antwort von cutaway:
Hi, I use this part for my Sennheiser Microphone
http://www.thomann.de/de/sennheiser_mzs6.htm and the
http://www.thomann.de/de/beyerdynamic_bs_86.htm
No more drive noise.
Greetings cutaway
Antwort von 02VideoFaBI:
Even the noise of the HV30, I think that is very loud. Since then helps probably only one external recorder ...
