Frage von toxitobi:
I have a motion to the second output is always in position. However, I would like to create a time-lapse recording, after an interval of 1.1 seconds makes a picture to make up for the movement visible to not get shut down image. Since I work with the 550d I would not realize the whole of the film feature, because the recording time is so limited.
Are there any DIY solutions? Or rather, the interval timer in a position limit resort my problem?
Greeting Toxitobi
Antwort von Jake the rake:
If your EOS remote control a program was there! Try it with it (laptop, via USB) ...
Otherwise, there are replicas of the Canon
Antwort von toxitobi:
The Eos utility gives me an opportunity every 5 seconds undergo a Picture. External trigger I've found on the inet can make a picture every second. But if you want to take a pendulum clock by Timlapse, then the pendulum every second s.selben site. No the trigger has a finer grid than a second. So you can not capture the movement.
Antwort von Jake the rake:
Perhaps it is easier to build a device where the decisive pendulum triggers the camera.
The trigger unit is very easy to build yourself.
Antwort von deti:
Cheap and good: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=250603863427
Have the timer itself successfully in use for some time.
Deti
Antwort von Jake the rake:
Cheap and good: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=250603863427
Have the timer itself successfully in use for some time.
Deti Hi,
he needs an interval of 1.1 seconds ... (The timer can be linked, just as the original Canon TC-trigger 80 only in the second interval or more ...)
Antwort von deti:
Well, then stop the contraction in the 32khz crystal shutter with a trimming capacitor a little bit. But presumably, the EOS does not trigger anyway just to 100ms. In my Timelapseaufnahmen, there are always long break in it which are probably due to the memory card. It makes no difference whether one uses a Class-6 or -10 card.
Deti
Antwort von toxitobi:
Thank you first for the input
Yes, the one with the intervals noted in the burst mode is that if one receives in the Raw. There are the first pictures still fast and then it's just next slowly. So my workarounds will now be wholly script that raises the Eos Utility, unfortunately, not mobile but better than nothing.
If we delayed the trip a small step in the so Kabelwegt. one is the second release arrived again at a second interval. Runs well on a full-yourself with NEM timer, simply because NEN retarders between remote and Cam will not work. I hope I have not understood you wrong, Deti because if you've got the solution, then explain to me how that would more accurately.
Greeting Toxitobi
Antwort von stefangs:
It seems to me to be easier to install an extra weight s.das pendulum. would be what?
stefan
Antwort von toxitobi:
I'm just not sure, but has the mass, I mean no influence on the oscillation period. The length of the pendulum is important for the well-known in ancient times physics. I could take the synonymous Clock in Stop Motion Engineering, when I swing with kneading the mass detainment * grin *
Edit: Wikipedia my commute to the physical, the oscillation period but with the weight related. In Mathematical commuting would not be the case. Would be synonymous not a bad idea.
Tomorrow I test times with a stopwatch if my Pc with NEM AutoIt script is able to get all the added sound synchronously.
Greeting Toxitobi
