Infoseite // Is then a video (VCR) and TV s.Sat without control of the Scart inputs

Frage von bibo:


Hello,
new devices are not always better!

My old TV had 2x Scart - since I had the satellite receiver (with 3x Scart for TV + VCR + Cable Turner) and turn the VCR (1x Scart) then had the TV s.der Front Connections - since I had the DVD on it - all inputs of the TV, I was able to choose through - a / source switching, etc. Thus, I could as DVD or VCR to record SAT without umzustecken.

Context
my new TV is synonymous 2x Scart and front connectors. the front lines, however, the switch from AV2 - a disgrace!
The AV scart connections 1 +2 I can not, through no input / output for recording choose.

Now the question

Example 1
If I follow these steps, I can not begin s.VCR
Satellite receiver s.TV AV1
VCR AV2 s.TV

there is no connection between the satellite receiver and VCR
or can I adjust something so that this connection
can?

Example 2
If I follow these steps, I can not see on TV VCR
Satellite receiver s.TV AV1
Satellite receiver s.VCR

In this case, the missing link between my VCR and TV

Only with the help of the old TV cable (round connector), I can
solve this - there are other connectivity options and
Settings - you say if I like Example 2 steps that should always work ....?...

Thanks for any tip
Bibo



Antwort von Markus:

"bibo" wrote: ... new equipment is not always better!
Indeed! Especially if you buy cheap. - This should be no allusion. I do not know what your new TV has cost. ;-)

"bibo" wrote: [...] Example 1 or can I adjust something so that they can connect?
My first idea was in the direction an additional scart cable between the equipment concerned to hang. This is not because the VCR only has scart connection. :-(

"bibo" wrote: Example 2 [...] satellite receiver s.TV AV1, satellite receiver s.VCR ...
The satellite receiver is only Scart outputs, but no input. Or?

Currently I have nothing better to synonymous. If the connection on the antenna cable (RF cable = "old cable TV"), then take the halt. This is not the most elegant way, but at least one that works.



Antwort von K.-D. Schmidt:

Either you close the satellite receiver s.den VCR s.and then the VCR s.das TV. Then of course you need to turn on the VCR to the satellite receiver to see Programs. During VCR playback, then the tape s.TV to be seen.

Or, you buy yourself a few euros for a switch, with the three devices you have scart output s.einen forwared can. I realized synonymous, and it works well.

Greeting
KDS