Infoseite // JVC GR-DX35 video - In problem

Frage von spi:


Hello,

I have the above camcorder. This has an A / V (S-Video) input.
If I like anything described in the Instructions do, I get to
synonymous and the monitor on the tape do not provide a clear picture.
Sattdessen I have a verzertes Picture in black and white.

If the problem is known. Search by've found nothing.

Thank you
Stefan



Antwort von Badd:

Quote: ... This has an A / V (S-Video) input.
This is of course synonymous advance, there a Y / C signal and not a composite signal. And if adapter with the game (Y / C> CVBS), always remember no such adapter signal converter!



Antwort von Markus:

"spi" wrote: verzertes ... a picture in black and white.
Plays a Y / C signal is a composite input to (or vice versa), then you get only one (possibly with Grieseln marked by) s / w-Picture, but it is still stable on the display.

The description by type I tend to different television standards in player and recording device. Something similar was being discussed here:

-> The camcorder is NTSC ... Bullet Cam is my PAL



Antwort von spi:

"Mark" wrote: The description by type I tend to different television standards in player and recording device. Something similar was being discussed here:

-> The camcorder is NTSC ... Bullet Cam is my PAL

Something in the way I would have presumed synonymous. But why should the camcorder an NTSC signal expect? Is synonymous nix the instructions.

On the subject of Bullet CAM: there just want to go.
I would s.Mopped filming and wanted to advance the AV interface test.
As a source, I had a DVB-T Box. The is a PAL signal.

Thus, I will provide me a CAM which supports NTSC synonymous.

Greeting
Stefan



Antwort von baerfot:

Maybe try Dus nochml only with a different source



Antwort von Bernd E.:

"spi" wrote: ... So I will provide me a CAM which supports NTSC synonymous ...
If both your camcorder as synonymous with PAL source work, the cause of your problem, so now lie elsewhere. The acquisition of a NTSC camcorder brings you only one thing: the exact knowledge of why it certainly does not work ;-) The test with another player would be my recommendation synonymous.

Gruß Bernd E.



Antwort von Markus:

"spi" wrote: But why should the camcorder an NTSC signal expect?
The camcorder would be an NTSC signal is expected if it is an NTSC device. Whether this is true in your case, betrays you usdas nameplate on the device.

Recently, I had photographs of a consumer customers, who was quite surprised when I opened it, that the contents of its MiniDV tapes in NTSC format available. How synonymous always had his camcorder, a PAL device was not.



Antwort von Michaela:

Bullet CAM is ordered. Parallel to this, I have with a
Digi-Cam as a source Tested.
Behold, I get a clean picture.

So hope it funzt. Information coming as soon as Bullet-Cam arrives.

Greeting
Stefan



Antwort von spi:

Hello,

Bullet Cam have now received. Plug and Play is unfortunately net.
But after the series.

I have to further restrict the times of the problem of my TV Out
Sony DigiCam s.den A / V (not the S-Video - In) connected to my JVC.
Setting s.Camcorders gem. Instructions Page 26
http://de.jvc-service.net/public/download.cfm/instrbook/LYT1120-002A.pdf?model=GR-DX35&size=1619080&link_flag=1

Result: Super Picture with setting PAL => As a result, the camcorder to
any case, PAL compatible

Now I have the Bullet Cam Video In on my TV set connected.
Picture to come clean.

Close I now Bullet Cam s.Camcorders s.bekomme I verzertes Picture
in s / w with small streaks.

Bullet VideoOut the CAM as described: 1.0 Vp-P75 Ohm / PAL composite signal

Video input of your camcorder (Page 45): 0.8-1.2 Vp-p 75 ohm / analog

Where can the problem lie?

Thank you
Stefan






Antwort von Markus:

"spi" wrote: I have to further limit the problem, sometimes the TV out of my Sony digital camera ...
"Digital camera" is a generic term that is used for simple camcorder as synonymous for Digiknipsen used. What is in your case?

Overall, the impact test results so far quite chaotic. Times and times it does not, but always with the same combination. Did you perhaps have a television, the only definitely PAL B / G s.dem understands you and the test could Bullet Cam? And a player who just absolutely PAL B / G issue and with which you input your camcorder could test?

Devices, which may be standard TV output mixes (eg Digiknipsen), are for such troubleshooting inappropriate.



Antwort von joachino:

Happy Easter first ;-)

So with a digital camera, I have a SonyCybershot Still Image Camera meant.
This is according to manual s.TV out a composite signal via the RCA out.
The signal is still in the menu of PAL on NTSC be converted.

With the setting PAL s.Camcorders I have a clean picture.
I have yet s.meinem DVD player and an RCA
S-video output switch including Y / C or Composite discovered.
Synonymous here I get a clean picture on the camcorder.

In my estimation should be to ensure that if the
Camcorder gets a clean signal, it is this synonymous "implement"
can.

Ergo, I have probably but with the output signal of a Bullet-Cam
Problem.
Can the resolution (in my case, 420 TVL) of the Bullet-Cam is a problem
be?

Kleiner Nachtrag: The Television s.dem I connected Bullet-Cam
had understood PAL and NTSC.

Greetings and Thanks
Stefan



Antwort von Markus:

"Stefan" wrote: The signal is still in the menu of PAL on NTSC be converted.
That should not be confusing, but just so you know where such information is the rub: What says "PAL" alone already?

"Stefan" wrote: Ergo, I have probably but with the output signal of the Bullet-Cam is a problem.
Your previous attempts, I would after such a possibility in the shortlist, but further tests after push to isolate the cause.

"Stefan" wrote: Can the resolution (in my case, 420 TVL) of the Bullet-Cam a problem?
No, this is no problem. The Resolutionin TV Lines says just how "sharp" the picture is produced. On the output composite / PAL has no influence.

Does the Bullet Cam nor anything set or is it all fixed? Stands apart from the television and the camcorder or other video device with AV input available? As I said, it would be advantageous if is one with Nur-PAL-B/G-Akzeptanz would.



Antwort von spi:

Hi Markus,

thanks for the help, but unfortunately I have no device was only explicitly
PAL those standards.
In any case, not that I knew. Therefore I decided
The Bullet-Cam to send back. Period expires in five days.

I will not give up, but a dealer here in Berlin are looking for,
where I can shop for free ;-)
Conrad for example.

Info follows.

Big THX
Stefan



Antwort von leonhard lierzer:

Hello,

now have the Aiptek Sporty CAM s.den and connected AV In
see it funzt. Problem was thus the Bullet Cam.

Greeting
Stefan