Frage von Jan Merlin:
Hey folks,
Would you not synonymous always play a Kamerakran have?
I got in just three days built. These costs amounted to just around 80 euros!
And that part is spitze become!
Check him out at: http://jmf.sebjo.de/
So do not hesitate, and you build synonymous one!
About feedback I would be delighted!
Antwort von christopher:
Wow, I'm very impressed. Congratulations!
Antwort von Jan Merlin:
Thanks you!
Antwort von kurt95:
Hi,
this is really an excellent piece of work, I can judge the times because I have learned Fitter.
Very nice!
Antwort von Jan Merlin:
Oh, thank you!
Tell me, has anyone of you have a dolly built?
Because I would have nähmlich synonymous genuine desire it, but everything I've seen so s.Eigenbauten, Sahr very wakelig from ....
Has anyone tips?
Antwort von PowerMac:
Crane is good for 80 euros.
Nice site. Good photos, articles without error. So should it be. The layout would be somewhat improved. And the phrase "Whether documentary or artistically challenging" is not very clever. As would be the one with the other excluded ...
Antwort von Jan Merlin:
jau, good criticism! Thank you!
Due to Lay Out ... Is holding a "Free-Page" because you can not do much ....
Antwort von gast12:
hi hab me the "movies" on the page views. the effect of sequence with the deaf in the movie "lied the truth of the senses" is very cool. how exactly did you made?
Antwort von kurt95:
Do you have the "Colors"? Or the pigeons apparently do not move?
Antwort von Reimer Reimer:
Hi Jan,
beautiful part: the animated, for self.
In the film office, we have collected two years ago, to a fine
own dolly to get. Then realizing it has a mechanical -
student. Here again the links (you have to first register yourself,
but this is free)
The film office has a Dolly (With Still Image) and
A dolly for the film office The Matze, who has built, is always ready to answer questions about
words.
All the best Axel
Antwort von PowerMac:
Is it synonymous Photos without signing in? Mich nervt it when I apply for a writer like image in a forum must register ...
Antwort von gast12:
@ jan: the latter. that the deaf do not seem to move
Antwort von kurt95:
yes you say it seems ;-) Was just happy filmed! Hab halt the pigeons and the Camera aufgescheucht coincidentally "parallel" to Auffliegen moves ... Lucky coincidence.
@ Reimer
Hab mich ma registered. Must wait until I can clean but ever grateful! What have you learned since then paid for the dolly?
Antwort von Jan Merlin:
jo, that was ... I was not logged ....
Antwort von Thore Rehbach:
Hi Jan, really impressive, your crane:) You write on your Page, you would have made designs, etc. Do you perhaps also on your Page put together with a list of needed parts? That would be very helpful, because not every design is a natural talent;)
Many greetings
Thore
Antwort von Jan Merlin:
Yes, I can make! If, however, still take a few days ... just did not have as much time ...
Antwort von catchafire:
great device, looks like what.
But the kannste gelöte synonymous transport?
Antwort von ussi:
Crane is good for 80 euros.
Nice site. Good photos, articles without error. ... if you do usfolgende changes that:
stable => Stable
preziese => precise
;-) (I'm not German ...)
The crane find ich toll. Anyway, my respect, so what you have everything to put you through!
Antwort von Jan Merlin:
Thank you very much! Changes will be implemented ....
Yes, with the transport is no problem. The "boom" is simple thanks to the screw (only 3 screws) and then disassemble wonderful place in the car!
But clearly, you can hike to the ding does not stick under your arm ... ;-)
Antwort von Andreas_Kiel:
Hi,
implemented the really cool idea! Couple questions I have:
- The angle at which the camera sits, how strong is the material?
- The counterweight to see some after-barbell rests, is that correct? Or are the DIY-list?
- How do you think the wire under tension, and how will Durchrutschen avoided? For variable length of the boom as a Einstellmechanismus must be, I do on the pictures do not recognize.
Thank you for the work
Andreas
Antwort von gast22:
Really nice to see how easily and quickly so a crane can be built. I am not couch on the assumption that a 3-pole construction with transport ableren lengths synonymous shaky or harder?
I'd smooth my own desire to build!
Mach so next! With so much excitement and enthusiasm, you need only perseverance and of you heard yet :-)
I'm waiting for the construction Instructions ...
Antwort von egomane:
Gibt's because synonymous times to see sample videos ... Faith is not really that of similar videos can be achieved, as with a commercial Leichtkran system (be it of Glidecam, ProVista, ABC, Kessler, Vance ,...). The mere absence of the fluid head is likely relatively soft rides hard time ...
Should it be otherwise, I am happy to teach better. So, please show us times what is possible (without Potspro ...)... Does look the part quite well ;-)
Antwort von Andreas_Kiel:
I am not couch on the assumption that a 3-pole construction with transport ableren lengths synonymous shaky or harder? Yes, each joint is always something instability as a whole. Joints need a minimal match, so that they can rotate. This game translates naturally to the end of the rod, and was in the joint are only hundredths of a millimeter, s.Ende lies in the millimeter range.
The weight can be neglected. There are very lightweight Kuntstoff joints.
BG
Andreas
Antwort von Andreas_Kiel:
Should it be otherwise, I am happy to teach better. Look on Page Jans after, there's a video to see: "excerpt from the film" The Uncertain Sleeps ". As far as I understand it, is it still with the
old crane emerged, and the Crane has become very personable.
Do not forget that a long Alustange synonymous as shock effect. It is elastic and springy to a certain extent the Handgezitter from the operator. Synonymous or Ruckler in small joints.
BG
Andreas
Antwort von Jan Merlin:
Hey guys, I wanted to just for the resonance of many thank you! I am really!
Did the last few days, unfortunately, very little time, but I will try over the weekend a test video (also likes without any post ;-)) and a construction manual ready to make!
That with the use of the old crane in "The Uncertain Sleeps" you (Andreas) is actually detected correctly!
MFG Jan
Antwort von FabeX:
So respekt .. I was impressed .. 'm on it and turn the crane to build, but I would like an additional opportunity for horizontal swivel the camera installed .. bin grad s.tüfteln, but already have a solution I think.
I should really build this thing or times draw diagrams, I'll certainly available.
lg
andi
Antwort von jansi:
For all those, especially in "Crane Fever", is perhaps this Page quite interesting:
Antwort von Jan Merlin:
So, habs finally shop!
Now there are many new pictures and two videos synonymous with the crane in action!
Bin gespannt synonymous your opinions!
MFG Jan
Antwort von PowerMac:
Those who like hot?
Antwort von Jan Merlin:
What do you mean?
The videos? -> "Kamerakran in the test run" and "A Dream"
Antwort von Addur:
Respect.
The crane, your movies, I like everything excellent.
Very nice.
Yes, the crane, I will build synonymous. The make a good impression.
Thank you for your instructions and preparing.
I think with a Canon XL2 should not be overloaded.
The spontaneously arising Film, gefällt mir gut. Sure wanted to be your girlfriend anyway s.dem days of parking and plunge you thought:
"Och, because I try but like the crane, then at least it is not in vain ..."
The reason for their suicidal thoughts thrust was the crane s.sich, so much of her time with you has stolen. ;-)
Antwort von Andreas_Kiel:
... the embedded video on your Page funzt strangely not ( "We're sorry, this video is no longer available"), but this link: http://de.youtube.com/watch?v=WritqxI3ivo leads remains to be seen.
Very nicely done, thank you!
BG, Andreas
Antwort von Addur:
Hab mir mal Prices of the ABA can send by mail.
Antwort von Jan Merlin:
Yes that is with my girlfriend so I can sign! ;-)
Jau cool find ich gut, if you build a synonymous! If but once he is ready to see photos!
Uh, for me does the video ever!! Who still has problems with it?
Then I would again re-link .... Thanks for the hint!
Next weekend I will probably back a little movie ... of course, rotate with crane! Then again you get a few pictures are not so shaky ....
MfG Jan
Antwort von FabeX:
Well, I've already Tripod, Monitor, bolts, angles, etc. Now I am missing yet the aluminum profile bars .. (I get the end of the week) and then go to Build s.Wochenende :-)
First now but the "simple" variant with pure vertical swivel of the camera .. in a second, I would like to progressively expand the possibility of horizontal swivel camera reality.
Can not wait to finally drill in hand to take * g *
lg
andi
Antwort von Jan Merlin:
How well I understand you can! I wish you much fun and good luck!
And as I said: Pictures Pictures Pictures!
But treason times as you swing the horizontal history want to build?
Antwort von Addur:
I've since discovered a problem. I do not get the rods in the length of your built into the car. Have unfortunately only a small car.
I will be in shorter sections to build the arm and must have me ne socket idea that does not wobble and then the 4 elements of a 1m connecting.
I have already: the monitor, the cable, the remote tripod for my Canon XL (so I can complete the bottom of camera control) and a good mood.
The horizontal movement of the cam could be via Schneckenradantrieb with a small servo motor make. Gibts at Conrad. Can infinitely in speed to the left or right to rotate.
Antwort von Jan Merlin:
What is the cost to such an engine? And how do you control then?
Will you really make 4 elements? What is it for a car? Smart?
Since you had to be good but what really superior, otherwise the fast shaky!
Antwort von Addur:
What is the cost to such an engine? And how do you control then?
Will you really make 4 elements? What is it for a car? Smart?
Since you had to be good but what really superior, otherwise the fast shaky! Because the engine look for example here:
http://www1.conrad.de
The cost between 10 and 60 euros, depending on performance. (For models look)
Control is very simple: Battery, and NEN controller as the model of rail, adjustable links on the right knob. 5, - ¬ approx Battery When you could not take moped battery which is rechargeable and creates yet NEN small spot with lens for night shots, or so, eat only ne idea.
Yes, I must make four elements. It must fit in the trunk. Is an SLK and has only two seats, "rear" do not eat.
Nee with the rotational movement of the first off let me, I feel like you've already built it super.
Antwort von Dhub:
Moin:)
The replica excites me:)
Where did you live such a good 50kg boxing stand raised?
Antwort von FabeX:
So regarding Horizontal swivel option I can not really explain how I did this out .. but I will make times a sketch, which is synonymous with someone else except me know :-)
Basically, it would be so, then below that I have a lever, which is always exactly the same position as the camera top. That means I prefer the stick right, the camera turns to the right, to before .. camera down, etc.. All of the camera would be a mad movement type .. but is still not quite 100% elaborate .. would also be made with wire. but on what you need for each case is at least 1 ball .. and with the fit of ball bearings, I've never been employed .. drum mach I only look at the "normal" version.
Well of course there are photos and then once I've finished it.
lg
Andi
Antwort von Reimer Reimer:
@ Reimer
Hab mich ma registered. Must wait until I can, however, purely
thank you in advance! What have you learned since then paid for the dolly? He has cost 550 euros s.Material and 100 hours of Matze.
All the best Axel
Antwort von videojoe:
Soon, the unused stuff in the corner, everything is dead ..
Antwort von Jan Merlin:
That with the engines of Canrad sounds really good and so easy! But I have zero experience with such Bastelleien ... Times I'll ask my uncle, the model is ...
Well, ok. 550 euros is too much for me unfortunately ....
The "that stuff" soon unused in the corner I do not think so! Two projects with the crane are already planned in Bielefeld in March and accompanied me to the crane to Marburg where we are a small movie project to have the legs!
Antwort von videojoe:
@ Dhub
The boxes I stand from a music Facheschäft.
But here: http://www.thomann.de/de/km_21450.htm
Is the synonymous ...
Antwort von FabeX:
Only in this way a small tipp .. there are boxes for the tripod speaker mounting plates to put on the tripod, and with a set screw to be fixed. Leaving now the set screw off if the plate very well 360Grad can rotate .. ie, you will save the manufacturing of the balks, etc.
Such a plate will cost a few euros .. Ich habs mir grad ordered and will then look if it works.
Antwort von Jan Merlin:
where you have the mounting plate to the stand? Everything in the store I've found about this was just too shaky. Therefore I apologize for the wood and decided it was better than expected.
Antwort von FabeX:
Now, I do not yet know whether the synonymous with this record really 100% fit .. but I probiers times, not so much expensive.
Did the plate at Monacor ordered ..
Bin accidentally in an electrical wholesaler, so I have for my own use as synonymous terms quite good :-)
lg
Andi
Antwort von VipA:
Toller crane for little money!
Have your film I viewed at Youtube, is for test shots really good.
Antwort von Jan Merlin:
Thank you!
Ah, see there ... Electrical Wholesale! Very good, yes you are then sitting s.der Source! ;-)
Something else, I want me a shoulder stand build. Like on the Picture. Because who has experience or ideas as well could go?
Antwort von Andreas_Kiel:
Miss this design four servos and eighth is a Windschutzfell already shaking it through the room, barking and making Häufibäufi on the carpet :-)))
and seriously: Construction? Hmmm ... because I had something, but I must raussuchen is forever ago. Either a link or a PDF doc.
BG, Andreas
Antwort von FabeX:
Sodale .. Crane is now 80% complete.
come tomorrow or the rope, the monitor bracket and the handle for the vertical movement of the camera, then the cabling and the ding is ready :-)
Hab das ding, however, made up of 3 tracks, each of 2.45 m was built. the middle rail, you can omit synonymous, so werd ich cut the ropes so that they easily with snap hooks on the smaller version can be cut.
naja .. if he really is finished, the pictures:)
regarding shoulder .. tripod something I would have before me a long time to build .. However, I do not know what variant. glaub ich werd before I tended to the bodykit for the Glidecam build.
lg
andi
Antwort von Jan Merlin:
Na, da bin ich aber gespannt!
Here are the boys of OkPictures have something as simple gebastelt ....
Antwort von Jan Merlin:
Hey Andi,
What looks like with your crane? Isser ready?
Antwort von FabeX:
Hi Jan,
So the crane is in principle .. with 4 meters boom.
but the storage s.stativ still new, I must make. I have provisionally made with a balks (although I have no cutter with the diameter had, now I've fudged through drills 20s:)
HAB me but something else which I bought on the entire build. Monitor mount yet to come and then I will take pictures.
Brauch the crane now then eh soon for an event.
lg
andi
Antwort von Jan Merlin:
Narrative? what an event?
Antwort von FabeX:
A tuning event in Salzburg .. Atrium at West.
I know the club personally well organized and the year will be synonymous to rotate a clip .. because the crane is increasingly being used.
And of the event, I also make a short clip.
(But I must first look to whether I actually use the crane / use it or not ..)
Antwort von Jan Merlin:
cool, I can see the pictures before me! Since Kranaufnahmen but would be really a good Gestalterischesmittel! If Salzburg is not so far away, I would indeed provide "second camera" to make ... Or second crane ...
Antwort von FabeX:
hmm .. so pity .. I would always need a second camera .. So if someone is from salzburg s.diesem date and time has .. bitte melden!
Antwort von kayburg:
looks great
Antwort von Stallforce:
Very cool! I understand not only the technology. High Down is clear but how the camera is rotated, or what is the rope? to tend?
Antwort von FabeX:
Exactly, the rope is extended by two s.der roll forward with the front roller cam is mounted a lever s.der rear.
Through the tension of the wire (this must be really excited to be determined) turns the camera front with the 1:1 leverage with movement. Ie vertical swivel.
wants you to swivel horizontally you would have either a remote head or other structure of the camera platform and the lever (Works in my theory in practice .. but I have not tried .. the principle is similar to the Glidecam4000)
lg
andi
Antwort von Prinzregent:
I've written the übrigends ^
Hab mir jetzt mal a few sketches angerfertigt! Will we build a well synonymous. Maybe I try to swing the horizontal yet assembled. Possibly with remote control and engine?
Antwort von FabeX:
I wanted the horizontal swing synonymous originally installed, but on the wire. As I said, in theory, it seems to work if synonymous with s.aufwand more than the current version.
A Panhead get s.1500, - is therefore not in favor ..
I am even more synonymous in the superior me if I perhaps synonymous themselves Panhead build, but I must still carefully consider and plan, because I Stepless speed control so I want gentle rides and synonymous fast pans can do. (If yes, because already :-))
However, I must first of my crane as it is completely finished build :-)
Antwort von Jan Merlin:
Building and then equal to two times the Panheads, ne? One then nähmlich for me! ;-)
Antwort von FabeX:
hehehe :-)
Well, we must ourselves be entertained * ggg *
but basically synonymous should be no problem :-)
Antwort von Prinzregent:
Hab gestern mal an old RC car and taken to the gearbox and the electric motor dismantled! Problem is, however, the engine turns too fast and I have to throttle him. Has someone an idea? Can I somehow cut? Moreover, it is only with a reel and cable if you make the plate will not be so inclined above the head with a motor will be controlled.
Antwort von FabeX:
So in an rc car is the engine driving a universal motor .. You can use the power of speed rules. But the torque is not good I think.
Already, it wüde work with both pans to wire, but just using a different construction.
Just as a notice of thought .. times you try to present you monticola Glidecam 2000/4000 only one front and one rear s.Kran (where the second roller normally sits) then you connect the whole with two ropes (one for horizontal, one for vertical). No matter how you now move the rear Glidecam .. the front would be the same motion to join ..
But such a construction is a little difficult to make .. Therefore I think that I even synonymous to me more like a panhead build:)
Hach .. Would that I had more time and Money * ggg *
Antwort von geid0r:
With a RC-engine, the whole can not be solved.
You have
a very strong servo engines.
I am sure something can be found at a moderate price.
Antwort von Prinzregent:
Again ne question about aluminum profiles! How wide are they? 5cm?
Antwort von FabeX:
exactly 50x50mm
Antwort von Bilderbastler:
Looks very impressive. Ich mach mir synonymous already thinking how I can implement the design.
I'm just not sure that this cable construction ne could endure heavier Camera, minhas weighs about 6kg and I am not sure if it were not then the Wheel s.dem wire wegrutscht and the camera slowly to the bottom of all pans.
Antwort von Prinzregent:
So now I have a 6 meter Vierkantalurohr ordered! I hope this is not too hard behind. Does this make sense then to 3 meters to share? Because of transportation, etc. or better s.einem piece approved? Where can I get a tripod to buy boxes? Ebay?
Antwort von sas_hh:
What works in any case is a mini Jiib with losing his arm.
the man could in a small amateur Tripod build if ne small camera that would take work.
I was animated, thank you!
Antwort von Jan Merlin:
Yes, I would aufjedenfall share after 3 meters! and then one meter overlapping screw together. So kommst du synonymous a length of four meters and have a much better Stabielität. To tranasportieren should be synonymous better.
Boxing tripod gibts in the music shop or here: http://www.thomann.de/de/km_21450.htm
or perhaps synonymous on Ebay .... ;-)
Antwort von Prinzregent:
Could you possibly describe again as the suspension is on the tripod? Simply NEN hole with the Druchmesser of the tripod in a block of wood, drill?
Antwort von Jan Merlin:
Yes, just as I have done. My neighbor and carpenter, the tool because I could make the exact match. The shaking does not have a degree of resistance and can still shoot well.
Antwort von Prinzregent:
But not completely durchgebohrt? How do you get then the core of all this? You can completely synonymous with the top and then again a plate or screw top?
So now the question ne camera: What you need for a screw to attach the camera? That is certainly standardized?
Antwort von Jan Merlin:
Perforation is of course synonymous ... But with such a thick drill, you can simply synonymous with a certain depth to stop drilling.
Yes, you need halt sone Screw:
http://www.fotokoch.de/fotowelt/Hama_Taschenschraube_Metall_1_4_1_Stueck_13559_sets.shtml
Antwort von Drrichardfahrer:
From the U.S., there are pan / tilt system already below 1500 EUR ...
Schaut mal hier her:
http://www.servocity.com/html/pan_tilt_roll___accessories.html
Is there something synonymous in German and Austrian stores to buy?
Antwort von Oezkan57:
Crane is good for 80 euros.
Nice site. Good photos, articles without error. So should it be. The layout would be somewhat improved. And the phrase "Whether documentary or artistically challenging" is not very clever. As would be the one with the other excluded ... Hi,
Please excuse, but unfortunately I have no link to the website found :-( (
Antwort von Peter02:
That sounds really good man can an.Wo the images of the crane to see?
gruss
Gordon
Antwort von Michael Walter:
I have a crane at the Aventomedientechnik to say and write less than 3000 euros including Remote Head Monitor, etc. purchased and am so very zufrieden.Jetzt I can synonymous for my customers to make better films and they are more willing now synonymous budget slack to make.
It was a real investment.
Gruss
Michael
Antwort von PowerMac:
"Better Films" ...
Antwort von Jan Merlin:
http://jmf.sebjo.de/
Antwort von yeah:
http://jmf.sebjo.de/ In times of Abmahnanwälten I would be careful with a commercial and business genutzen website without imprint. But, who as an independent company s.Markt occurs .....
Or is it just kids with a little plastic toy in his hand, which want to play?
Antwort von Jan Merlin:
I choose in any case, the toy version! ...
Antwort von FabeX:
specifically s.Jan: :-)
On Friday, I think the first time used a crane.
Here is a small clip where two to three brief trips inside.
Is much more s.Kamerafahrten but will only cut .. it takes even longer ..
http://www.partyreporter.at/Videos/09.05.08-Night-Tunes-CARsting-Wie-Sexy-macht-ein-heisses-Auto_728
lg
Andi
Antwort von Jan Merlin:
Hey Andi,
das freut mich! looks very good! But I want to see your photos! ;-)
I just is synonymous again fully operational. Turn is just a short kung fu film in Marburg and since he is almost every second of filming used. If in the next few days to a few of my Page "Behind the Scenes Photos" to give my Page.
MfG Jan
Antwort von Prinzregent:
So today was synonymous in the construction. Did everything as far along but now it is a problem with the Holzkeil of the Tripod is. Do not just clean the hole. How do I now s.besten? Carpenter I trust them?
Antwort von Jan Merlin:
The can with safety! So I had the good fortune a master carpenter next door, too, because it was no problem.
It is synonymous very important that the hole diameter has the right! So because wakeln and stabielität. Also the hole should be deep enough. When I really stop it suits perfectly. Does not a game but can be rotated without bucking.
Reports times, whether it has worked!
Regards jan
Antwort von ef.multimedia:
So I'll crane my now synonymous rebuild. At present it consists of 2 aluminum profiles, which can be pushed into one another, enough on top. The whole then 2 times: the top and bottom. So the crane swivels vertically always with. I still have concerns about the wheels and steel cables. Keep the wheels really look like? As you have noted the rope stretch? What happens if you released the lever back? Camera pans the front s.Kran then rapidly down? How much kg you need in your FX1 s.Gegengewicht install?
Antwort von Jan Merlin:
I've got 7.5 n.hinten it. But that depends, of course, synonymous depending on how long your "boom" is over and how much you stand to the rear did.
The wheels and the wire holding it all without any problems!
The tension of the rope varies so I'm always a little bit, because I do not have ball bearings fitted, depends on the fact I leichtläufigkeit the camera motion. This one has everything but after two test runs quite well out!
I will in the coming days synonymous again a new "Kranvideo upload.
best Grüße Jan
Antwort von ef.multimedia:
So I was already in the building. Do the same roles as you get. What kind of steel you have taken, 3mm?
For me everything works well in advance, except for the clamping of the rope that is really very difficult.
Antwort von Jan Merlin:
No, I have a longer cable, as it is twice the length of the crane must have. On one of the photos on my Page you can see, as I with the tension of the rope made hab. This comic "clamping Dinger" because ...
It is important that you are a PVC coated wire take that ensures that the right grip!
If your crane is ready, you have to give me a few photos absolutely chic!
Good luck!
Jan
Antwort von Prinzregent:
So the tension, I found very easy. Synonymous Have a 3mm PVC umanteltes wire and put about 10 meters purchased. but was far too much. To stretch just a pack with 4 terminals so NEN Entdrillerteil and so Harken for clamping.
zum Bild zum Bild The hole I might now get a shrine made of
Antwort von Gugo:
... On Friday, I think the first time used a crane.
Here is a small clip where two to three short trips there are ... Crap, I would have known I would not s.dem WE went into the city, but in the Atrium ...
Antwort von ef.multimedia:
I hope I can exchange my cable yet. Mine is without Kunststoffummandlung. With what I actually 3mm diameter :-). My rope is 6m long. Pictures I will soon be my new hompage. One last question: yes I have the same roles as you made. How did you handle it screwed? This is something I have not yet quite clear.
Antwort von FabeX:
@ Gugo: You're from Salzburg? Find ich cool. szene1 you're on or something? (my nick: FabeX) -> times to contact me .. maybe some day we can mutually exchange information, etc.
@ all:
So I voted for my is being un-coated steel made .. synonymous works well, you just need to stretch halfway heavily ..
(Our stores are more than bad in Salzburg .. because you have to be happy if you screw m12er in getting the correct length, etc..)
@ Jan: sorry, still have no photos.
lg
andi
Antwort von Prinzregent:
I think the leverage is with two screws through the gaps of the wheel is inserted and then tightened with washers. Have the wheels synonymous
Antwort von ef.multimedia:
Ah yes, now I see's synonymous. Do I have the same times I try. I have times without the lever a couple of trips sampled. It seems pretty hard to be that you have a loose free ride how.
Antwort von FabeX:
So I have the lever for an aluminum tube is used. two holes in the roller reingebohrt also two small holes drilled and the whole plate with screws tightened. Keeps perfectly.
Basically, I have my crane the material "wood" to avoid :-)
No idea why .. perhaps because I am on my metalworking trades (electrician) is better ..
(And for optical reasons I think:))
Antwort von Prinzregent:
I will be synonymous an old motorcycle handlebars use if it works.
Antwort von megalutzi:
Hello,
by no means a PVC coated wire used!
I've learned in the study but never quite understood why ...
then when I finally build my crane collapsed. Now I know why ...
For me it was so that the PVC of the Seilklemmen abgequetscht was torn bodies and s.diesen is. The wire is then simply through the PVC sleeve slipped.
Since then I Lastseil as a non-coated wire, the stress test is much better to survive.
Just for info, my crane is somewhat larger, 6m. Above was a Z7 with Remote Head drauf, s.anderen end, it was 40kg!
There are of course ordinary loads on the rope.
The lateral stabilizers I have with PVC wire left since coming less load on it.
Can be a stop time image of the cunning rope (actually it's not torn but s.der Kausch durchgerutscht) that if someone is interested. I had some other synonymous Seilklemmen, which are slightly longer and about 3cm to the cover rope.
Believe me.
Do not sheathed cables!
Synonymous I had enough confidence in my health and the ropes. But after thy before your eyes crane collapses, because you no longer go so well. Fortunately, the building where 3 people were tuned to have accessed and the expensive camera so have been saved.
And fortunately it was a test day, so we had enough time to organize new cables and the crane was for later production use.
Greeting
Lutz
Antwort von Prinzregent:
So I tell me if this crane may not coincide but only the activation of the "head" ausharken. Will the PVC sheathed times can
Antwort von Eugen von ...:
by no means a PVC coated wire used!
Take s.besten which is made of stainless steel, because if it is. It looks better longer and not rust (it is good for clothes and cars). Ropes and unverdreht always carefully unroll. Minimum diameter for diversion note! When handling work gloves if possible and always check for wear.
Stainless steel ropes for example, when there is a railing Takler wire (thin) or Wantendraht (S.4 mm upwards).
Eugen
Antwort von megalutzi:
So I tell me if this crane may not coincide but only the activation of the "head" ausharken. Will the PVC sheathed times can OK, if the rope only for the parallel guidance of the head or the head itself is used, then that's okay.
Should more weight because dranhängen will halt difficult.
Is each small enough cranes Seilverspannung without constraints.
Stainless steel is certainly the best solution (my yacht synonymous ...).
Greeting
Lutz
Antwort von ef.multimedia:
Then yes, I've yet purchased the right rope. Fortunately I was able to steel the exchange no longer, otherwise I now synonymous hätt these PVC sheathed scrap. Slashcam When the upload of images works again, then I will be one of my purely represent crane. With my homepage is still lasts.
Antwort von Tuffy:
Slashcam When the upload of images works again, then I will be one of my purely represent crane. With my homepage is still lasts. Take a picture but Hoster - is no bad as Image Shack, but as a good
Antwort von tom:
Slashcam When the upload of images works again, then I will be one of my purely represent crane. With my homepage is still lasts. The image upload works again!
Liebe Grüße,
Thomas
Slashcam
Antwort von ef.multimedia:
So this time a 2 pictures of the crane. The lever needs to be screwed synonymous and the platform for the camera must be screwed ncoh.
Antwort von Prinzregent:
But looks good! May be I'll ask for what you paid for the Cam so?
Antwort von PowerMac:
Fast du Darfst is if you even researched.
Antwort von ef.multimedia:
SonyHDR FX7. At about 3000-2400 ¬. My has cost 2500 ¬.
Antwort von Prinzregent:
Only in this way for private use? Since I can not keep my cams. Is there somewhere a good point or tips slightly older models to gain?
Hope my block of wood is tomorrow ready for the crane
@ Power Mac
I think in a community can be quiet times demand and converse. Such posts are fürn ass damage and a forum. Sorry. If I would have researched know I still do not how much he had paid.
Antwort von Jan Merlin:
Wow, I am indeed correct about! Find ich gut!
Ef.multimedia Thanks for the pictures! If you want the crane to travel on rails? Due to the large base plate ... Now I am eagerly awaiting the first sample videos!
Antwort von Jan Merlin:
ah, ok ... 've just picture the headline read on ... because it is synonymous without Dolly?
Antwort von ef.multimedia:
The crane was built so that it fits on my dolly. Without it stands, but I will never again make. At last, without turning the crane dolly would almost collapsed because it was an uneven lawn. Sample videos available soon on the net.
Antwort von PowerMac:
(...) @ Power Mac
I think in a community can be quiet times demand and converse. Such posts are fürn ass damage and a forum. Sorry. If I would have researched know I still do not how much he had paid. This is redundant and required knowledge. There are Google. For experiences, opinions and there are new forums. But not to determine what a camera will cost. There are search engines and price the product pages of the Manufacturer.
Antwort von Natevi:
Powermeck Ah, but let these silly touch, and compulsory redundant knowledge, Chapeau! Do you know when I started to involve myself here, I found your articles interesting, but now it makes no more fun to read.
Regardless, I now associate Kläffer always one of the neighborhood, every time when a stranger goes along, slobbering on s.Zaun and s.springt.
Schade. Anders's all beautiful.
Antwort von PowerMac:
Yes, beautiful.
Antwort von Prinzregent:
... and because he received word from the experts!
Naja relating back to.
Antwort von Prinzregent:
So here and my first test video. You notice how I still think the "nod" and so but it says something about this. Unfortunately, I have the camera on auto so the light had problems.
http://www.myvideo.de/watch/4516728/Kamerekrantest
Antwort von Jan Merlin:
Wow! The looks so exactly like mine from! Krass!
Gefällt mir gut! So, the video is just a bissel boring because there is always the same shows, but because it is so synonymous not drum .... Uh, because the "nod" that you can with the time ever more control! Practice Practice Practice! If you have the doll Drahtseil not so exciting, you have less synonymous shakes inside! Of course it can not loose it ...
How long is your "boom"?
Antwort von Prinzregent:
Aha I thought would be better Strammer. I then loose all the times a little. I also have no leverage s.der posterior part. If the useful and the more you feel?
On Sunday I will be in a skate park a few times to make shots.
I guess I am with the crane to a Height of 5 meters per come as a profile of 3 meters and has them at 50 cm overlap. Then stop stativ height and to the swing point deducted, we are at about 5 meters.
Antwort von ef.multimedia:
Hello,
did the same crane. The buckling is synonymous struck me. Since the crane is not used nor was I so synonymous not busy next. But if the first use of the crane should have work properly. How then is this "kink" eliminate. For emergency, I could simply swivel head against my own, but this is not a permanent solution.
Antwort von Prinzregent:
Here are a few pictures
zum Bild zum Bild zum Bild zum Bild zum Bild zum Bild zum Bild zum Bild zum Bild zum Bild
Antwort von Jan Merlin:
Wow! It is times an ordinary crane! Hast du gut gemacht! With 5 feet do you even have a meter higher than me! x-), however, is your cam so synonymous lighter than what my ...
The counterweight, I would, however, still clearly s.den fixed crane machine! So, it looks as it could be that there can swing around and that would be quite an zurfolge wiggle ...
I've now synonymous again with new video Kranaufnahmen online ... -> http://jmf.sebjo.de/
LG Jan
Antwort von Prinzregent:
Yes equal gehts los Schnall then the weight times I still firmly with tape so it does not wobble and as I see in your video, I must make mine even more difficult.
Find in the Making of where the person in the garden below is very nice and then when the girl comes s.das railing. Also nice is when the person is hochgelaufen the stairs and you only garnicht understands only pity the s.ende them briefly the person from the picture is. Last trip I find synonymous top.
Antwort von Jan Merlin:
Thank you!
Yes, buckles because the times fixed drann! If the tank as completely full? because otherwise the water in there so synonymous out and her schwapen ...
--
http://jmf.sebjo.de/
Antwort von Prinzregent:
So yesterday went quite well because I have a backpack with beer on it was hanged. went much liquid! The tank is almost full. Will I have weights but to lay! The recordings I have not yet analaysiert * g *
Antwort von FabeX:
Haha:)
Backpack with beer * ggg *
That's me started quite well before, only the longer the duration of filming the easier is the counterweight * ggg *
Antwort von Prinzregent:
Jap because you're right but fortunately I had a bottle of water and soda to the entire balance could resist.
