Frage von Kuma2627:
Who can be against me if the pay raises, the motivation to solder a cable to my previous DV Camera via LANC s.Scart adapter?
I would like to DV - In s.der camera off, so I VHS tape directly over the Firewire to PC Sonyand Digitizer can.
My fingers just do not create more.
Wiring diagram is available (s.Anlage). Sometimes I can provide a standard cable, so only needs to be adjusted.
Thanks for your bids
Edit from Mod: thread under the heading "beginner questions" postponed.
Antwort von Quadruplex:
Who can be against me if the pay raises, the motivation to solder a cable to my previous DV Camera via LANC s.Scart adapter? That will probably not go - LANC is the camcorder for thought control, Scart for analog picture and sound signals.
I would like to DV - In s.der camera off, so I VHS tape directly over the Firewire to PC Sonyand Digitizer can. What does the DV-input with any analog input to be done?
My fingers just do not create more. With all due respect: If I read your question, it seems to me not the finger to be the problem ...
Antwort von Markus:
... in order to solder a cable above my DV Camera [...] [...] s.Scart adapter so that I VHS tape directly over the Firewire to PC Sonyand Digitizer can. First, the AV input of the TRV310 unlocked, what standard is not the case. That is, for example with a widget that is synonymous (in fact) the DV input unlock.
The next step is of no cable Scart to Lanc (2.5 mm jack) is needed, since this is the wrong way. The TRV310 has quite normal RCA connectors for video and audio, so that you're on a cable of the pole can fall back. It is to signal the direction to be respected. The most common cables are namely [cinch -> SCART], but you need [SCART -> cinch].
Whether the TRV310 is an analog AV signal and directly through PC via Firewire s.einen can pass on, I would doubt, because the DV camcorder to instantly switch-IN once a Firewire cable is inserted. Would be possible but a digitization of VHS on Digital8 and a subsequent capture of Digital8 to the computer.
Antwort von bobby-c:
Who can be against me if the pay raises, the motivation to solder a cable to my previous DV Camera via LANC s.Scart adapter?
That will probably not go - LANC is the camcorder for thought control, Scart for analog picture and sound signals.
I would like to DV - In s.der camera off, so I VHS tape directly over the Firewire to PC Sonyand Digitizer can.
What does the DV-input with any analog input to be done?
My fingers just do not create more.
With all due respect: If I read your question, it seems to me not the finger to be the problem ... I think YOU do not have just one problem but several.
Once enable people to take seriously and, secondly, you have no idea.
Antwort von bobby-c:
... in order to solder a cable above my DV Camera [...] [...] s.Scart adapter so that I VHS tape directly over the Firewire to PC Sonyand Digitizer can.
First, the AV input of the TRV310 unlocked, what standard is not the case. That is, for example with a widget that is synonymous (in fact) the DV input unlock.
Yes, my camera is standard DV - In free running, as in Japan bought.
The next step is of no cable Scart to Lanc (2.5 mm jack) is needed, since this is the wrong way. The TRV310 has quite normal RCA connectors for video and audio, so that you're on a cable of the pole can fall back. It is to signal the direction to be respected. The most common cables are namely [cinch -> SCART], but you need [SCART -> cinch].
Whether the TRV310 is an analog AV signal and directly through PC via Firewire s.einen can pass on, I would doubt, because the DV camcorder to instantly switch-IN once a Firewire cable is inserted. Would be possible but a digitization of VHS on Digital8 and a subsequent capture of Digital8 to the computer. Markus, das apparently I am by these (and other) contributions to come: http://ns.sps.volyne.cz/set1394/anin/analog.html, have tried Prog under W98, but since this happened, what you say: the camera switches instantly to DV - in as soon as I connect firewire. Also this contribution says that with the aforementioned cable works:
http://groups.google.com/group/rec.video.production/browse_frm/thread/887f603582a5d76d?hl=en&lr=&ie=UTF-8&oe=utf-8&rnum=5&prev=/groups% 3Fhl% 3Den% 26lr% 3D % 26ie% 3DUTF-8% 26oe% 3Dutf-8% 26q% 3Djukka% 2Baho% 2B310% 26btnG% 3DGoogle% 2BSearch
Antwort von bobby-c:
Mark's still a complement:
if one has a lot of VHS recordings, this "looping" probably the best because it is quality and in time brings s.meisten.
The connection of DVD recorder using RCA s.die Sonyerfolgt after this deactivation of the DV - In, but probably need to disable using the cable described previously only be made if I find that the two websites (s.vorheriger contribution) have understood correctly.
Antwort von Quadruplex:
Once enable people to take seriously Sure - that is why I try so, synonymous to unclear questions to answer.
and secondly, you have no idea. Presumably therefore the moderator of this forum my concerns and questions promptly confirmed ...
Antwort von bobby-c:
The required adapter is D-SUB25 of on mini-jack ... thus, the Camera s.den parallel port of the PC ... Just read.
Antwort von Markus:
if one has a lot of VHS recordings, this "looping" probably the best because it is quality and in time brings s.meisten. The quality in both cases (D8 caching directly through) the same, but the camcorder is not negligible laufwerksseitig course load. After all, would come through the recording and subsequent playback, dual DVD-term s.Kopfstunden together.
... should probably disable the means of the previously described cable only be made ... It may be that the application of a special computer freaks, the firmware directly on the camcorder takes access. I do not know that the deactivation of the Lanc DV input while retaining the analog input provides.
For cable, perhaps the following:
Lanc via PC? Among the standard Lanc-functions:
Antwort von PUDU:
Markus,
of the link I mentioned says:
"However, it is possible to get the pass-through conversion
feature to work even in the older models by Fiddling with
the camcorder's memory settings, which is accessed via a
cable to the LANC port of the camera.
You can find instructions on building such a cable here:
<http>
The same site then carries a simple program with which you
can temporarily enable the analog-to-feature using the said
cable: <http>.
Moreover, it is also possible to enable some other nifty
hidden features, such s.manual white balance and zebra
stripes, although adding them requires a bit more work.
Study the links on the above-mentioned page. "
This I gather from that not really a double load times, because there is nothing on the camcorder is cached, but it is directly of VHS recorders to hard drive. Better if it works, then it is not.
One of the participants' guest 'felt it was probably only a d-sub25 to mini jack cable is required. Why then, but the wiring diagram on volyne.cz ... ... ? And as for me, then starts the tray to Chinese (EPP / ECP / SPP mode). Who knows what there already is?
Many thanks and greetings
Antwort von Quadruplex:
Marku (EPP / ECP / SPP mode). Who knows what there already is? The parallel port, known colloquially synonymous printer port called - has been synonymous here already mentioned. Had with the origin of the questioners mentioned Scart nix nothing to do ... Had but in contrast to Scart conclusive - on the parallel port can be quite simple control commands of all kinds settle.
Antwort von PUDU:
EPP / ECP be directional / bidirectional, or even to print only in forward gear and the anderemal forward and reverse gear.
