Frage von hmGast:
Good day,
I use a tripod and the Manfrotto 055PROB than the 700RC2 head. Since I use the tripod in the often impossible position, I consider me a leveling bowl zuzulegen.
Unfortunately, nowhere do I find an indication whether or not I, if there really is one, between tripod and head can be affixed.
Has anyone with this specific combination of experience and can help me?
Or is it imperative to introduce a new column with leveling to purchase a bowl?
Thank you in advance ever.
Regards
Herbert
Antwort von Udo Schröer:
Sell your head and then buy the 701RC2, the dragonfly s.Board
Antwort von Jan:
Hello,
the center column with Nivelliervorrichtung for the 055er series called
555 B.
I think you mean the Nivellierkugel 438 or Nivelliersockel 338, the s.Stativen without Nivelliervorrichtung their service verichten.
Frag stop where you buy it again after experience with the last two options on how well the fit with your tripod.
VG
Jan
Antwort von asa:
Hello,
@ Jan
@ Udo
firstly thanks for your replies. Probably I was not very clearly expressed, namely:
The tripod is sometimes the case that the diaphragm of the head absorbs up to 30 degrees of the horizontal differs. To head and horizontally oriented camcorder now can I really need a three-way head.
But I do with the 700RC2 quite clearly come as Pensioners unbd but rather had to be ready, I am looking for a solution, these continue to be. That would be, for example with a ball joint possible, but too shaky to me.
Therefore I thought s.eine Nivellierhalbschale between head and plate, so as the orientation of 30 degrees to the horizontal can be achieved.
Unfortunately, I have here on the "flat land" is not an appropriate way to shop reside, there is not. If at least 90 n.dafür drive and then synonymous not sure if I richigen specialist for you.
Hence my question here and maybe you can me further help.
In any case, thanks, really helpful for each answer.
Antwort von Jan:
Now I understood, you want to bump the tripod no change (some legs up or down until the screws dragonfly in the middle), but only move his head so that there is an evenness quickly.
Yes I can with my 501 head with 525 Tripod - sometimes very useful - I had my times with the second tripod Velbon DV 7000 - then I must just like when you bump Scattered legs to change the spirit in the middle, which then sometimes can be very annoying.
If your center column horizontally post (it did at the 055 samples), that's the angle of Manfrotto rail 553 to the camera in the right direction to get, but is synonymous not what you are looking for.
You want a kind of ball - on the head must be the 700 RC 2, which is difficult. Manfrotto Gear Eiger courses there, but it is a matter much more expensive gear like the Eiger 400
Gear Eiger 400 I know now not at all synonymous, whether on a Manfrotto ball head not just any 3 / 8 threaded draufbekommt - as in the fitted Neiger 400.
difficult difficult ....
VG
Jan
Antwort von hmGast:
Hi, Jan
thank you. Yes, exactly what would be the expected solution. Good, however, that the solution of your specified price is not the same with this stand. The first shock was just too great, he came but once I learn it s.anderer body was: 589,00 EUR.
That is certainly worth the design, but unfortunately I do not pity.
Nevertheless, many thanks for your professional reference.
But synonymous for the indication of a Manfrotto ball head. Since then I have discovered, of which I think I could so clearly synonymous and the price is acceptable, with around 55 EURO.
Manfrotto MA 486 Compact Ball Head - Rugged ball for medium-weight cameras with Zentralarretierung for mounting on all Manfrotto tripods-(3 / 8 "), without the quick-change device, 1 / 4" and 3 / 8 "camera screw, Color Black - - 360 ° rotation - -- Tilt -90 ° to +90 ° - the maximum load capacity 6 kg.
That should work or?
Best Regards
Herbert
Antwort von finne99:
PS
The price was already here and is even over 600, I had him first not seen because JavaScript was disabled.
H.
Antwort von Peter S.:
There is indeed a Nivelliereinrichtung to dazwischenmontieren, it costs less than 100 ¬. However, there is probably no 30 degree offset. The part is expected to Panorama accessories can be found.
MFG Peter
Antwort von Nivellierer:
If I have understood you right, you have a look Nivelliereinrichtung between Tripod and Video Eiger can be screwed.
The Nivellierkopf of Manfrotto 438 MA I have been using about 3 years with good success. The Nivellierkopf for Tripods gadacht which does not possess Nivellierhalbkugel. Adjustment + / - 10 °, 3 / 8 "female thread for tripod screw, 3 / 8" screw for the video Eiger. price about 70 euros.
Greeting shops
Antwort von hmGast:
@ Peter
@ Shops
Thank you for further instructions, but unfortunately there are 30 ° is the minimum that I "manage" should be.
Regards
Herbert
Antwort von Jan:
Hello,
yes leveler is right - I completely overlooked, 438 can be 10 ° leveling, 338 = 5 °.
The MA 486 is the best of my knowledge the first (lowest Manfrotto) ball head, above the 1 / 4 "and 3 / 8" (as you need it) - 482 and 484 have only the top 1 / 4 "thread.
Should go, I do not know how stable the whole affair with the ball and pointing aufgeschraubten video head.
VG
Jan
Antwort von hmGast:
Should go, I do not know how stable the whole affair with the ball and pointing aufgeschraubten video head. Hello, Jan,
have here - of the past - a stable imperial ball and so is the whole thing quite unproffesionell, ie shaky.
Be So wait, if it eventually a more stable solution is, say a 4xx that synonymous to 25 or 30 ° creates.
MOST BEAUTIFUL SUNDAY
Herbert
Antwort von hmGast:
unprofessional
.. BTW, so I will not be misunderstood, the emperor ball was then used for the purpose best.
Regards
Herbert
Antwort von hmGast:
Hello, togetherness,
but it is now leveling the hemisphere Manfrotto MA555 MDeVe with center column and it has worked very satisfactorily.
Again many thanks to all, especially Jan, Peter S. and leveler, which have helped me, a decision is correct.
Regards
Herbert
