Frage von lospottos:
Hello,
've Matrox Parhelia 128 gp
and get a good piece not to run.
slot, cable, etc. is all correct.
have on the hp matrox the latest drivers downloaded,
I just do not know what actually will be used ....
new old can not write about etc, windows software test failed, etc. ..
the seller has given me no standard installation included
(USED BOUGHT), with RTX 100 mineral could at least download the installation and update ...
have two tft's s.die map angeschlosssen, s.anderen computer running
both vga / vga / dvi adapters without any problems.
matrox can I start the computer section, the second tft not activated, and both are connected to dvi synonymous configured
(S.tft is set )....
would be grateful for any help ...
Antwort von hkrull:
Good morning lospottos,
the problem comes to me in connection with a card MATROX P650 familiar. The calculator does not boot and the next control LEDs of my two TFTs went off again and thus signaled "no signal". In my case it was because Windows XP does not funktionfähigen (MATROX)-Drivers brings.
The solution went something like this:
Windows in Safe Mode, which can be reached by one during startup of the computer at the right moment the F8 button presses, then screen with VGA resolution (640x480) the calculator boot. The next step then MATROX drivers install, but it may be possible (depending on driver package), the MS. NET Framework package installed, the MATROX software to further configure the card. Then you can start with the höherauflösenden (MATROX-Drivers)-screen resolution to boot. I hope I could help you. Grüsse hkrull
Antwort von lospottos:
thank you very much,
solving problems, without success.
do not have any cd drivers get (private sale)
of the downloaded drivers matrox homepage
are so extensive that I can see no order, just as in the RTX. 100 per, for example, is ...
meanwhile, I had both monitors s.laufen, but with
farbausfällen, artifacts, tape, etc. .. krisseln
somebody has an installation CD and can tell me what it is and how it is installed.
synonymous am equally s.den support of matrox but English is not my strength at least not in such things ...
danke für eure hilfe
Antwort von HZJ:
Here are the latest drivers for Win 2000 and XP
http://www.matrox.com/graphics/en/corpo/support/drivers/driverInfo.php?id=201
The link leads directly to the download page Matrox
The Page durchscrollen to bottom, put the check mark and then click on Download.
If you already have other drivers installed, in safe mode to uninstall everything.
And one more thing:
With digital control the Matrox cards have only limited resolution combinations. Two times is 1024x1280, Wide Screen, however, is not, as far as I can remember.
Greetings, Bernhard
