Frage von Richman163:
Hello!
I have a camcorder of Panasonic (GS70EG) and would like to add a Picture of my PC to the camcorder via S-Video. The S-video output I get of my graphics card (Asus V8460) and have linked this with an S-Vid cable with my camcorder. Unfortunately I know next absolutely nothing else. 've Never done before sowas with the action. Firstly, I have no proof that my graphics card gives a signal at all and receive all of the camcorder signal. According to the manual, I have it set that can receive a signal on my camcorder, S-Video.
I very much hope that I can help someone. This is all much neuland too much. I thank you in advance.
Mfg.
Richman163
Antwort von Summoner:
Hello Richman163!
So I would try the following:
To see if your graphics card emits a signal you first go to the desktop with the right mouse button on "Properties". For further details on the output over S-video on your Gra-card, I can not tell you because it is different for each Manufacturer. In any case, this is (usually) the place to activate the S-Video output of the Gra-card. Next, begin a television set would not hurt to see our introductory offer of whether a signal is sent to the card. What could be synonymous going to turn you have Panasonic on recording mode while connected cable. In the viewfinder will then be shown the signal of the PC.
If all this is done, you only need to display anything on the screen what your heart desires ;-)! Before You set the camera to go with the Studio Recording and gehts!
I hope this helps .-)
Gruss,
Summoner
