Infoseite // Motion detection with (semi) professional cameras?



Frage von Wurzel_Bildung:


Good day together;

actually I'm considering to get denCanonXA10. Especially since he has very impressive features.
However, I lack beiCanonXA10 a function which "motion detection" calls.
I hope it is really synonymous motion detection.

I am looking for a camera that is within the functions such as dasCanonXA10, but additionally has the function of "smart to film."

By this I mean that the camera is not pointless film the whole time, but only if you move / or. if something moves in the image.
A kind of automatic sleep mode and automatic recording.
Describes something stupid, so sorry.

Can someone help me because next?


Regards

Wurzel_Bildung

Space


Antwort von B.DeKid:

So I do not remember the mode it a trap (trap mode).

MfG
B. DeKid

Space


Antwort von deti:

As you take an IR detector and thus controls the recording function.

Yes, you can take something like: http://www.pollin.de/shop/dt/NDg0ODY0OTk-/Lichttechnik_Leuchtmittel/Leuchten/Leuchten/Nachtlicht_mit_Bewegungsmelder.html

... and then solder a cable s.den right places. Done.

Deti

Space


Antwort von Freddi:

Deti's right - that might be the easiest solution.

Much more interesting than the start-is, however, the stop function ... ?

So in addition a small-time circuit of Conrad now that switched off after a set time a relay, which is soldered to the same points as the detector output (eg, IR remote control or Lanc control).
prevent and to which disables the detector with a second release, the cam before the time runs out, I put the output of the detector would be synonymous to run on the relay of the timer (of course the other contact) - which then inevitably for the duration of the time delay open.

However, I would take any battery-powered detectors, which have to extend the battery life is usually a so-called "dead time" mode - that is, if they had a release, they are for a period of "X" (typically 90-180 sec ) not working, so dead
If the subject that is within a few seconds of 2x moves, takes the Cam might not occur.
So 12 V power supply with detector use - there's no such thing.

Why do you need that?
There may indeed synonymous other (simpler) solutions ...

Space


Antwort von handiro:

For veterinary use film in years. However, Motorcycle Battery minimum, because the whole thing must always be under current has said .... otherwise as Deti, the movement of so synonymous alone can turn off when moving nothing more.
Many prefer to work with wire ...

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash