Frage von leoHDV:
I know, I am a little nerv with the canon hv 20, but it is very important to me!
I wanted my film s.Computer cut!
When cutting software I use Magix Video deluxe 2007/2008 Plus!
My PC has enough power synonymous to HDV material to be cut.
But the transfer of the high resolution material tells me the computer:
"It could not connect me to the unit be established"
What can you do? But Windows shows me s.der task bar, a camcorder has been connected; synonymous known
"Windows Sound" sounds when you turn the Cam (dark, bright sound) or off (bright; darker sound)! : (
In SP nomaler transmission klappt alles bestens!
Is transferred via a Firewire cable!
And once everything is almost good gegannen to transfer the said magix finalize the transfer, that the target directory was not found and thus synonymous no film has been transferred, although the HV 20 of film in the transmission ended!
PLEASE HELP ME! Weis no longer be next! For all the answers I would be grateful
Greetings from Leiblfing!
[/ code] [/ quote] [/ url]
Antwort von Andreas_Kiel:
Try something with the freeware HDVSplit. When the camera is detected because it is a setting for Magix, which is twisted. Then I would sowieo at HDVSplit stay.
Otherwise, look in the manual of the camera according to how HDV is ausgepielt. When SonyFX1
for example, there are several settings (synonymous in combination), of which there is only one off the way you want to work.
Incidentally, it is clear from the manual of my FX1 synonymous not think the off in the other direction the camera to playback mode switch must be ... extent on the quality of manuals.
BG
Andreas
Antwort von Realsound:
Normally it is a faulty setting s.HV20. It must be asked to HDV. Not that he accidentally stands on DV. Since I often between HDV and DV material change I noticed that I started without Magix, the inserted tape briefly and then must start in the Magix Recording of an HDV recorder to be able to start. Otherwise your exact error message. So ...
1. HV20 via Firewire to connect.
Windows detects the camera (hopefully)
2. HDV tape can start short (10 sec.)
3. Magix start. Under recording - from an HDV camcorder select
That's it ..
Otherwise I type on a faulty device driver. This is somewhat complicated.
