Logo Logo
/// 
NV-GS320 problem mit Ersatzakku.

NV-GS320 problem with spare battery.



Frage von chris2407:
August 2007

hallo leute,

I've bought 2600mAh battery for the cam at the following link: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=200144081476

The cam shows but only a rest period of 45 minutes exactly the same as the standard battery ... Standard Battery has 640maH ie 4x so little ... what is this? I am amazed that the synonymous extremely fast Battery was fully charged ... After about 1 1 / 2 hour he was fully ... have the power cord from the Charger then separated again for 5 minutes and again the lamp was connected but after a few minutes from ...

've just read in the manual that charging for such a battery lasts 3.55 hours ...

or is the original of Panasonic Charger may not be suitable?

thank you very much.



Antwort von Peter2003:

Hello,

maybe good for the simple yes Battery nothing seems so absolute cheap goods to be.

Greeting
Peter



Antwort von skymann1:

Hello, I would send him back, I wrote the original with 2600 MA, which needs about 3 1 / 2 hours until it is full, but s.meiner 320 synonymous good 2 hours with the display.

Thy was synonymous cheap and has the correct size (as it looks) such as the large, but who knows what's inside?

However, for the money you get the little synonymous of Pana is not, perhaps anmailen times and complain if you have no reaction yet just a little and learn to balance it, the great original cost here so synonymous over 90 euros.

Gruß Peter








Antwort von JustMatt:

Moin

if Panasonic, with one of the largest battery manufacturers in the back (and the associated production techniques such as knowledge), his only 2040 mAh Battery to build. How then should the prices of such people without these opportunities come from? ..... as you can but before the sale was at thinking.



Antwort von Markus73:

"chris2407" wrote:
The cam shows but only a rest period of 45 minutes exactly the same as the standard battery ...

Hello,
I had the last week so you have written that you will soon need a new battery when you get to buy cheap :-)

Gruß,
Markus



Antwort von chris2407:

I had extra for a good battery but you wanted to ask me so do not recommend:)

How can I understand now exactly the Batteries How to test it? The best cam stand up, press record and run it?



Antwort von Markus73:

"chris2407" wrote:
I had extra for a good battery but you wanted to ask me so do not recommend:)

Then you have my answer from last Saturday apparently not good enough to read!

http://forum.slashcam.de/viewtopic.php?p=239015 # 239015

Gruß,
Markus



Antwort von chris2407:

but I've read but have no Ansmann akku of, or as found on my cam ... thought that these 12 ¬ Batteries are quite ok ... how can I do rational test How they really keep the battery? Continuous recording or is it just the cam to leave?



Antwort von tv-man_sh:

"chris2407" wrote:
... but do not have a battery of Ansmann or so for my cam found ...

Not just for a good photo retailers have a look. The Batteries are in doubt, do not have stock, they can usually order. On the homepage of Ansmann you can the exact article name for it.

"chris2407" wrote:
thought that these 12 ¬ Batteries are quite ok ... how can I do rational test How they really keep the battery?

In Cheap batteries are usually synonymous only Cheap-cells were used. They have the habit, the capacity rapidly to lose. Capacitance measurement is only under load make.
And before you now vast sums ausgibst to you by the army of Ebay Cheap provider to fight, rather once for reasonable money matters and will then spend a long-term work. With the Billigdingern can still throwing Battery-make and test how far they can fly;)



Antwort von chris2407:

so bad is the battery probably is not ... 'm currently in the recording mode to test ... until now there are 2 bands already fully complete so already 2 hours without a break is the Battery ... now runs the third tape bin mal gespannt How still holds:)

Just funny is that my cam is showing 60 min, then counts down the display completely after 0 and then go off again at 60 ...



Antwort von Markus73:

"chris2407" wrote:
Just funny is that my cam is showing 60 min, then counts down the display completely after 0 and then go off again at 60 ...

Can it be that you have the rest of band display mean? ;-)

Gruß,
Markus



Antwort von chris2407:

hmm this may be synonymous. Before the display is a R. .. thought that would be the battery indicator ... sorry I know with the cam is still not as good. Where can I understand the remaining battery life to see?








Antwort von Markus73:

"chris2407" wrote:
hmm this may be synonymous. Before the display is a R. .. thought that would be the battery indicator ... sorry I know with the cam is still not as good. Where can I understand the remaining battery life to see?

Not at all. You see only the charge. Incidentally, everything is synonymous in the instruction booklet.

Gruß,
Markus



Antwort von chris2407:

the battery always has a 3 bar can still easily take 4 hours to a total of approximately 6 hours with one battery: D

What software is really good and easy to use for the films later s.PC to edit? Good for the software of panasonic something? Or prefer other software? From the price quite apart ...



Antwort von jansi:

Yes. as you can from my own experience Pinnacle 10 recommendations.
Take prefer the new version (Pinnacle Studio 11).
Is very easy to come in and still offers many opportunities (everything is relative;)), such as chroma keying, etc.
The crash out again and you simply must accept, unless you have a special video editing PC.



Antwort von chris2407:

what do you think of this Magix Movie Maker or something? Or is it something else?




Antworten zu ähnlichen Fragen:
Battery Door kaufen Blackmagic Pocket 6k/4k
Deity SPD-1 | Battery Distribution System
GROSSES PROBLEM: Eingescannte Fotos in der Timeline!
Veydra-Objektiv - Fokusring-Problem
Canon C300 MK II und Tamron 24-70 Problem
Problem Ronin S und GH5
Problem mit ein paar Windgeräuschen (Interview)
Export Problem Premiere Pro CC 2019
Problem mit Orbitalen in After Effects CS6
Problem iMac 2017
Samplingrate Problem 48kHz > 44kHz
Problem Premiere Programmfenster Vollbild
GH5/GH5s Problem mit Atomos shogun inferno
DaVinci Resolve 16 Problem - Nur Ton- keine Bildspur
Sony PMW 400 mit Canon HJ40-fach Zoom Power Problem
Youtube 720p Problem
Zhiyun Crane 3 LAB Wifi Problem
P2 MXF Metadaten Problem
Logistisches Problem- Batterien
Problem mit HDMI Überspielung Fuji Blackmagic
Sachtler ACE L - Pan/Drag-Problem
Lumetri-Scopes Problem
Blackmagic Pocket 6 K, problem with compact flash
Problem mit Davinci 16
XDCAM - Import - Problem - XDCAM Transfer?
Color Grading Problem.. (Mir fällt kein besserer Titel ein)

















weitere Themen:
Spezialthemen


16:9
AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos