Frage von alannah12:
Hello,
I can not really take my video of the Panasoni NV-GS75 with software ulead videostudio9. 1.erscheint the video are not up in the small window, 2 appear in the NV-GS75, after a short time the announcement to press the reset switch. I then make, then briefly and comes back the next message. Now I do not know if this is s.der camera or just s.der software.
then there's so synonymous with ulead dv-band on the functional scan. the strangely works better, but even then, comes after a short time they reset message. what can be wrong? my camcorder already broken? is in the bdienungsanleitung if this reset-message several times comes, it means that what should be broken. but how came about that. I do not often use the camcorder?
or if the s.meinem drivers videoaufnahemgerät? where I could update the?
gruß alana
have the same post already written, because not knowing whether it is s.der software or s.camcorder: http://forum.slashcam.de/probleme-bei-videoaufnahme-vp114524.html#114524
Antwort von Jan:
Even with firewire connected?
Stupid question, but first I ask, because with the included software incl drivers for the GS 75 proposes an Dubbing with USB with the original program would be possible. Unfortunately, other Programs often take the USB 2.0 Drivers not matter.
LG
January
Antwort von alannah12:
hello jan,
na clear, I have connected the camera with Firwire. Under no circumstances can it possibly liegen.muß anything with video recording device-be drivers. is there anyone who once had similar problem?
gruß alana
Antwort von Markus:
Hi Alana,
You are a
repetition of the perpetrator. The dual, identical posting I've deleted. Please read the views here:
Punkt 1. ;-)
Es gibt eine ganze Reihe Dinge, die Du abklären kannst,
if Firewire (not working properly). Should not these apply, then it may well be, dass ..
stands in the bdienungsanleitung if this reset-message several times comes, it means that ... ... Your camcorder may be broken. That in turn could have several causes, such as electrostatic charges could your camcorder or FireWire interface s.Computer have added (->
ESD) damage.
Antwort von alannah12:
Hi markus,
excuse for the double topic, but I simply did not know why. synonymous, it might indeed be a software error, no? indeed had (problems with the power producer), therefore the other post under ulead. Also I had indicated at the bottom, that I am a 2nd had written.
because of the ESD: you can load credit for the electrostatic discharge that may again? or can prevent it is only that when charging the cable / computer does not it?
having firewire I had already checked in advance and actually I have complied with all the points. I can video record, yes, only that now come the reset messages. in the computer itself, there was the announcement that he is possibly the video recording device to update drivers?
ulead panasonic know nothing and do not synonymous.
Antwort von Markus:
Hi Alana,
is the reset error s.Camcorders synonymous when the device is not connected s.Computer? For example, during recording or playback?
Electrostatic discharge causes damage to the devices involved, so that there is a catastrophic failure or malfunction. What exactly happened there and how you can prevent the stands in the above linked posting "ESD damage.
PS: My links do not understand please as decoration, but click. ;-)
Antwort von alannah12:
Hi markus,
frequent reset messages when I only got as I said the video from dv-band wanted to record. there came the announcement that something with the video recording was not fall into the regulatory drivers.
There is so synonymous with the other functional ulead: "First to dv-band scan and then add video" and because it happened only at the end after a 20-minute recording. but was working again after I had turned off the camcorder again.
Antwort von alannah12:
I now have herumprobiert lot and found one: it's totally important that first the fire-wire s.den computer and then closes s.The camera.
And then the video recording only works if I just toggle the camera when I was in ulead already inside the camera, I bin.schalte a previously, I have already indicated above these problems.
And then it depends succeed, together with the formats: a flawless recording will only be successful if I am in AVi format HOST and not in DV Format.wenn namely, the camera is already turned on and then I open the studio9, slipping the car into the recording DV -- Format and I can not change the manual, so Format.erst to AVI if I turn off the camera again and again.
And as I said, I can not record in DV format, because then come the reset messages in the camera.
maybe someone knows why? in the grunde should not really be, right? the camera could still be broken?
And again, have said only for people who just similar problems.
alana
Antwort von Markus:
Hi Alana,
I propose that the AVI / DV-part new, opened only in your thread to discuss:
DV oder AVI-Format - Was bedeutet das eigentlich genau?
...sonst haben wir ja
return duplicate discussions. ;-)
Is this thread (Problem with data transfer via Firewire done) with it?
Antwort von alannah12:
Hi markus,
I mean, you have nothing better to control than the whole time, to answer how many threads I write, and whether they are double or not? it would be better if you were to ask to have it or be flat.
what is the pettiness? this topic is with the theme avi format absolutely nothing to do, ok!
So message to all others: excuse me for this personal, but that has just really annoyed.
alana
Antwort von Jan:
Hello alannah12,
"You'd better write answers ...."
that sounds pretty hard. I can only speak of me, I write almost 3 posts per day and often sit 1h s.Computer (s.meisten reading course with).
In each day goes by plenty of time to explain to the 1200en like a film dubbing s.besten is. I often give Tip's for Consumercam's and get a cent for it.
Mark writes plenty of 10 answers per day that bring most users almost always forward. I do not want to know how much time he davorsitzt. One should consider, without a coating now.
The double posting's are currently already annoying (to me synonymous already happened ..)
Well probably was the high degree of anger .....
LG
January
Antwort von Markus:
Hi Alana,
I'm doing just so that answers will be posted not unnecessarily duplicate and triplicate, especially when it comes to the same questioner or the same questioner.
There are several reasons: First, it gives those who provide answers, unnecessary work, there are some more people s.unterschiedlichen threads with identical contents turn. Second, the forum quickly becomes incomprehensible when discussing too many similar posts at the same time s.verschiedenen bodies in different directions. The smorgasbord of similar contributions is especially a hindrance for those who are here to search the forum for possible solutions before they start their own thread.
I hope you are to me (not) more angry if I s.and to come with proposals like the one above. ;-)
