Frage von wassi:
I use the NV MX 350 EC synonymous in an underwater housing when diving Sealux. My problem is that I do not), the record signal (see red mark on my monitor can s.Analogausgang suspended underwater. If the camera when it's open with the remote control adjusts the delivery of time and date is not a problem - until the first reboot of the Camera from the housing - then everything is running away!
Is there any trick in the depths of the menus with which I can bring the data display permanently on the AV-output to the monitor?
Thanks in advance for your tips and beautiful Christmas!
Wassi
Antwort von Blackeagle123:
Hello,
So jump set is s.der Panasonic I do not (I have the NV-MX300)! Should you can change something and have the signal on the monitor, did you tape it on wahrscheinlichauch synonymous with what would be bad.
Will you something else you need to consider. (Example: Second Small Camera of Conrad and buy into the housing?)
Love and Merry Christmas greetings
Constantin
Antwort von MiXMaster:
Hallo erstmal and many thanks for the quick response!
Your tip does not help me next unfortunately. I wanted an opportunity.
di me eternal Guckerei into the keyhole of the built
Viewfinder saves. So I've always wied3er that the camera does not
Dept. heard and next to the running, although I have pressed STOP!
Nevertheless, many thanks and Merry Christmas!
Wassi
Antwort von Stefan:
Water absorbs IR light stop pretty well ... (if there is an IR-FB)
Are not you REC lamp somewhere s.der Camera? With a photo resistor, a battery, two wires and an LED, or alternatively with a Listleitfaser can one little light somewhere s.eine clearly visible from the housing agency tinker ...
Good luck
The fat Stefan
