Frage von Thomas 533:
Hello,
I have a problem with my Firewire card.
If I use my digital camera connected via firewire, my
Cam easily detected Picture is synonymous top, just have no sound.
I also concur with an audio cable via line-in, or Micro s.habe'm just a grunt on the speaker.
For analog recording through S-Video and Line-In funzt fine.
Realtectreiber and audio features, if I remember correctly,
Who can help me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Antwort von grovel:
It is almost not possible in principle, the sound via firewire to lose (and certainly not necessary to further LineIn on the adapter).
Maybe you betray us so times, what program you use and how accurately you're made.
SeeYa Groveler
Antwort von Thomas 533:
DeLOCK did me a Firewire PCI card with 3x ext. and 1x internal connections increased (6 pole).
With a cable attached SonyDCR-PC1E via the DV jack.
Software is of Magix Video Deluxe 06/07 benutzt.Eingestellt is Wave Drivers Realtek HD Audio rear output.
Incorporated is with DV as an MPEG
Gruß Thomas
Antwort von grovel:
Unfortunately I have no idea of Magix - possibly what it would bring, if you take a screenshot of the Preferences window would post (And although the one where you "will be recorded with DV as an MPEG set did).
I guess times that there is something with the MPEG-setting has to do. In any case, the whole
s.weder s.irgend a Windows-Drivers-setting
b) nor s.deiner Hardware
otherwise would not synonymous Picture come. Instead, Magix loses when importing apparently the sound. Very likely a wrong setting on your part.
SeeYa Groveler
Antwort von Rovi75:
Sure the whole thing happened in the conversion to MPEG. Try it out the DV-Import Ihne any change - Just capturing. There must (!) With the sound 'of it, because it is a pure copy process is.
I SOWISO not understand why you deas material when reading umwandelst. Or do you have any HDV?
The real-DV files are larger () ca 12-13 GB / hour), but for a more appropriate cut synonymous. If you do not have enough disk space, then deletes the Meaterial you stop hinerher again. In addition, hard drive cost more auchnicht the world ....
I make the DV-cut principle, so, especially since I finished the film geeschnittenen SOWISO synonymous to tape recording. The conversion to MPEG for DVD creation, I do with the ready-cut material ....
Antwort von Thomas 533:
Hello,
because I have not much experience with DV recording, I have to appreciate every tip will then later convert the movie into MPEG.
So now relating to:
the problem arises not only when capturing but before I rec. go, so even if I only am in the recording mode.
I have now identified the different drivers at different Aufnahmemodis used.
Namely: In
Studio DV Microsoft DV Camera and VCR "in DV and
MPEG appears as" Sony DV device DV (Pal) VCR " But for all the settings I get no sound.
How do I send a screenshot in this forum with, he did not have to insert?
Gruß Thomas
Antwort von grovel:
If you're not logged in, so you have the Picture for a free image hosting raufladen.
eg http://imageshack.us
