Frage von till:
Hello,
- I want to cut my contribution without loss record back to a MiniDV tape. What and how do I exactly tuhen?
- what should I look for when rendering this regard? And what settings are not necessary?
- Where can I change the settings?
I hope it was not asking too much! Am very grateful for your help.
till
Antwort von Ephraim:
I would like to record my contribution without loss cut back on a MiniDV tape. What and how do I exactly tuhen? Put the cable of the camera in the 2nd Loch of the left
- what should I look for when rendering this regard? And what settings are not necessary? Place all controls to "5"
- Where can I change the settings? Top right are three boxes: Click on the right, then all is ok
I hope it was not asking too much! Am very grateful for your help. Not asked!
I hope I could help you: I work with the same software ;-)
Antwort von oliver II:
Hi Till!
Before you get the wrong hole in your camera you are using and on the response of Ephraim wondering here's a hint:
Tell us as precisely as possible, with what devices (camera, computer, etc.) and what software (editing software, operating system, etc.) You are working.
You will be surprised, turn out precisely how much the answers are.
In this sense, good lighting and good will "post"
Oliver
Antwort von StefanS:
why we do not here next?
http://forum.slashcam.de/qualitatsverlust--vt36730.html?highlight =
But because we are now well on it:
to 1
You have the right project parameters for capturing, edit and adjust to export to MiniDV tape. Those are always the same parameters, namely PAL DV (provided we have here) is not NTSC. At the sound you may have, or eight to 48 kHz/16 bit 32 kHz/12 bit.
to 2
To 1 if you did everything right, you need to 2 watch gar nix.
to 3
Among the various menu items, among which is the project settings or the settings for the "Export" or "Make Movie" (can be adjusted depending on the software).
Greeting
Stefan
Antwort von till:
I would like to record my contribution without loss cut back on a MiniDV tape. What and how do I exactly tuhen?
Put the cable of the camera in the 2nd Loch of the left
- what should I look for when rendering this regard? And what settings are not necessary?
Place all controls to "5"
- Where can I change the settings?
Top right are three boxes: Click on the right, then all is ok
I hope it was not asking too much! Am very grateful for your help.
Not asked!
I hope I could help you: I work with the same software ;-) Hello Ephrahim, or whatever you synonymous words ..
I am sure that you're very funny but I think your setting is keeping .... have only pity for such people
A pity you for your time and effortlessly.
Antwort von till:
why we do not here next?
http://forum.slashcam.de/qualitatsverlust--vt36730.html?highlight =
But because we are now well on it:
to 1
You have the right project parameters for capturing, edit and adjust to export to MiniDV tape. Those are always the same parameters, namely PAL DV (provided we have here) is not NTSC. At the sound you may have, or eight to 48 kHz/16 bit 32 kHz/12 bit.
to 2
To 1 if you did everything right, you need to 2 watch gar nix.
to 3
Among the various menu items, among which is the project settings or the settings for the "Export" or "Make Movie" (can be adjusted depending on the software).
Greeting
Stefan Thus,
order to provide clarity:
-Adobe Premiere Pro 1.5
Panasonic DVX-100BE
Windows XP Pro
--------------------- 3.2GHz
--------------------- 1GB Ram
Port: FireWire
I hope that's enough.
till
Antwort von StefanS:
Dear Till,
what are you doing at the moment, sounds a bit like
I bought myself a Ferrari Formula 1 racer. What must I do so I'm going as Michael Schumacher's fast?
You have 'expensive camera ne ne' expensive editing software, 'nen matching calculator and can not or will not afford the time to familiarize yourself to the topic DV editing, but of us expect that we tell you that you are in the 1st Right-click menu item above, have the third option, and then turn the second of the top and since then the check mark and set values according to our specifications.
It does not work.
I want you never to the leg, etc. But it does not work. Beginner or not, if there is little or no initiative from the question herauslesbar resulting answers as you get them. Since this forum is (including me now) has become somewhat sensitive.
A good approach would be to collaborate on your Page now have, for example, now inform you that your project settings were such as DV-Pal, that the sound was synonymous properly, etc. etc.
How about with a meaningful dialogue instead of insulted liver sausage?
Reading the responses of Ephraim and synonymous of me time under the heading:
Wants to provoke me, so I'm now even bother mentioning anything and share with as much detail as I can. Then they can not talk himself out, recognize that synonymous I take the trouble to write something more than just three questions, and to all boredom synonymous'm still willing to invest time.
So just courage. Ran s.The keys.
If you once you take the trouble to read the last 5000 threads, perhaps you know what I mean.
Greeting
Stefan
Antwort von steveb:
Dear Till,
synonymous you can be sure helped, though .... or but yes (synonymous But now again) if you are just a small moment would have thrown in the instructions, you'd notice that it is actually good and would have been described (answered almost) all questions ...
You've got a manual?
Edit. sign Stefans Post!
Antwort von rolarocka:
Dear Till,
what are you doing at the moment, sounds a bit like
I bought myself a Ferrari Formula 1 racer. What must I do so I'm going as Michael Schumacher's fast? [...] Dear Stefan,
I do not understand why she keeps me so stupid. When I rumtanze with sooo expensive material and only have to ask some technical, it does not mean that i have no clue.
I've spent nights in order to study this Manual.
I have dubbed synonymous onto tape. But I want to be sure I had everything done correctly. Whether dises tape has the same quality as the raw material from the camera.
eg. about APPRO, I tried to burn to DVD. Has synonymous work. But it does not meanders. It always jerky. Although I have done everything as it should be. The settings in the Project I have everything set up correctly. So:
Pal -
-48 Hz
-4:3
lower-HBilder etc.
With the ton, I have no problems.
I wanted synonymous use your experiences to be sure I had everything done correctly.
Currently auser DVD movie jerky is all right.
I wanted to annoy anyone.
Sorry
Again: I've already bit ahnung but not so that I know all the technical background.
Love greetings
till
Antwort von prem:
s.schneider I'm currently making, and do. Ask the brief arisen from the present because of that. Had no time to write long been contributing to. but would provide a sinfolle and productive dialog if more time would lead to too verfühgung.
Antwort von StefanS:
Till,
None, it is you are stupid!
I personally, and for this you may not stone me later or what I would have no preference but rather, just a little critical of the way and manner, as you can be wrong with us as a questioner as little information of your page in the area around a second thread on the same topic and then open the injured admit, if it does not go according to your wishes.
So, now stony or let me help you next, but please with a little cooperation.
After your last thread, I assume that you know the following:
The data on the tape are the main quality dar.
This looks out for Camera and played directly on TV super.
Transferred from camera to PC and then played back, things look not so great.
It was here already described thousands of times why this is so. I repeat, therefore, not only here but also confirm to you that the quality of your recordings in any way has deteriorated there.
If you are editing these recordings now programmed in which no preference editing, while the right ones, have chosen to DV fitting parameters and are working hard with only cuts, is not rendered to those who raised the quality of your original recording not veschlechtert again. There are still the ones and zeroes itself in the same order.
If you assumed that mean, correct settings, so that no rendering process begins, which would you even recognize certainly playing on a MiniDV tape back, then you have again the same quality as the starting material.
Now, whenever you re-direct the new tape of a camera s.TV play, you have super Picture s.Qualität the same without any loss.
So much for the DV track.
Anders is that if you create a DVD.
Here is much more compressed. Synonymous but here we can say that you are depending on the codec and settings you can achieve a result that you visually only with difficulty or not at all can be distinguished from the starting material.
On the other hand But you can be a disaster synonymous Herbei lead.
What makes me as trim s.Deinem last post, is the statement that the DVD jerky, even though the settings you mentioned that you, at first glance appear to be correct.
Why write about this part of the story again in more detail.
Length of the film
Data Rate
Where is what hooks in terms of half-image, full screen, etc.
Jerky like it, permanently or only sometimes
Which encoder was used in the APP or an external
On which player is jerky
& c. & c. & c.
The more information we have, the easier it can be helped.
Greeting
Stefan
