Frage von Michaela:
Hallo, erstmal!
I'm New here!
I already have the whole lunch forum in your leisure, but not the right place.
Therefore, I must now be but a question. I hope you have a tip for me.
So, I want my VHS movies to DVD burn. I have a four-month-old multimedia PC of Medion, which - as far as I can over look - have the features available.
So I s.meinem VCR SCART RCA adapter connected, it is provided "triple-RCA cable." The other end of the cable I s.der front of my PC s.den corresponding jacks plugged in - by the colors Blondinentauglich yes! Then turn on VCR, video start, Other .. then I really expected that my PC has to say something.
But nothing happened. And now?
I then called Nero, on the option "record movie" button. But there was only a black picture and say that the recording was canceled because no signal was found.
Is now among you someone who is on the floor and laughs and kringelt something like "typical woman" calls.
I would be super happy anyway, if your me your knowledge could provide.
Would it perhaps?
Ah yes, the Scart Male Female I s.der with the TV legend connected and the switch s.dem adapter to output to.
Go times assume that this is correct.
Sincerely,
Michaela
Antwort von Michaela:
I guess this is about the TV card will run.
Antwort von B.DeKid:
Is the yellow Male (s.PC jack) Video In synonymous?
Gabs because no software? What does the Windows Movie Maker for example Virtualbud or if you have it connected.
Antwort von Michaela:
Hi,
So the yellow time is right.
With Windows Movie Maker I have just done what. So the program is running.
Should I directly what of the VHS movie to see, if I click on?
What does on the TV card to run?
LG
Michaela
Antwort von Markus:
So I s.meinem VCR SCART RCA adapter connected ... With adapters, the Scart and RCA connections, there are two signal directions. Widespread RCA -> Scart, but you need the direction Scart -> RCA. Furthermore, the VCR SCART output hold (usually with "TV", or similar means).
Then turn on VCR, video start, Other .. then I really expected that my PC has to say something. But nothing happened. No reason for concern, because of analog devices are generally not recognized PCs. The software in the recording device must be selected the next digital, that is between your VCR and your PC. If in doubt, you have to halt all available options give it a try.
Ah yes, the Scart Male Female I s.der with the TV legend connected and the switch s.dem adapter to output to. Go times assume that this is correct. I just see that I am your only contribution to the end should have read. ;-)
Where is your approach is correct, but most synonymous for the sake of completeness the scart switch position "input". It is often not clear whether the claim to the Scart or cinch the page and "input" would be in your case for the scart page correctly.
Antwort von Michaela:
... The software in the recording device must be selected the next digital, that is between your VCR and your PC ...... I understand that not so true. Could you give me explain it again?
Where is your approach is correct, but most synonymous for the sake of completeness the scart switch position "input". It is often not clear whether the claim to the Scart or cinch the page and "input" would be in your case for the scart page correctly. "Input" synonymous, I have already tried, but there is nothing doing.
Could it possibly be that the PC Connections s.meinem are not configured correctly? Can I see somewhere? Where can I find info on my PC about it?
I somehow have no starting point, something had never been made synonymous.
Sincerely,
Michaela
Antwort von Markus:
... The software in the recording device must be selected the next digital, that is between your VCR and your PC ......
I understand that not so true. Could you give me explain it again? Your VCR is analog, so it can not recognize the computer, just as in the usual (digital) hardware. Instead, as a recording source, a device to ensure that the PC knows. This could, for example, TV or graphics card, depending on with which the internal component AV Connections s.PC are connected.
Could it possibly be that the PC Connections s.meinem are not configured correctly? Since I have you s.die manual, which has put your PC should have. AV connections may exist, but not internal connected. So something would betray the instructions.
And if nothing drinstehen should have the PC someone unscrew and look into it. At least then reveal the "blind" Connections.
Antwort von Michaela:
Thank you, now I have understood it.
In the manual is as follows:
".. This connector is used to connect external analog audio sources (such as stereo, synthesizer )..."
"... may be synonymous optional stereo RCA cable."
"... You can s.Ihrem PC an external video source with an S-video - or composite (RCA) - cable. These connections enable you, with your PC to record video data and edit if necessary ..."
That sounded to me quite simple and clear. And so I made it synonymous.
On weekends, I have a little time again because I will again sit in peace and try.
If it still does not work, do I sign up again if I may.
If it went well, do I obviously synonymous.
Thanks again!
Until then cordial greetings
Michaela
Antwort von Markus:
In the manual is as follows: ... That sounds promising! In this case, synonymous for recording a software installed. Sometimes, these inputs of only very specific (attached) programs.
