Frage von Polecat:
Hooray, I thought, my hard disks DVD recorder has a DV input to accommodate "the camcorder.
Perfect! Since I spend at the rendering time and can easily accommodate in real time on the recorder and then write them a DVD of it.
Theoretically.
My recorder is connected to me still says "No DV camcorder. It's true synonymous, but my PC. But that's s.sich the same video signal.
Has anyone done sowas schonmal or someone has a tip on how I could do this?
I have Adobe Premiere 6.5 and the Pioneer DVR-433.
Best regards,
adrian
Antwort von GhostDog:
I have the pioneer dvr 520th
I'll do it as follows:
dvd-recorder connected via firewire cable s.pc. the dvd-recorder switched on dv. run after that you can just leave the video premiere and at the same time in the recorder for recording press.
spend perhaps synonymous works if you export cut window to make band. for me it worked last time not more.
just as I said, simply connected, then the video on the timeline and then press run on borrowing.
If you have problems, simply register again!
for me we went without problems.
Greeting Fire Fan
Antwort von Polecat:
I've tried so not at all honesty, I have only read on the DVD recorder "No camcorder connected" and had not at Recording then tried.
I've tried to spend both on tape; spending on video and can run directly, always connected to the message "No camcorder.
But stimtt: I simply press the recording time still try to ... doubt but that it will work.
Otherwise, the DVD recorder has some s.Reiz lost to me: that was one of the main reasons: hooray, I can no longer be reckoned 36h for a video but can directly record ...
Thank you,
regards,
adrian
Antwort von jens:
Did your camera Dvin? Then you could even round replay on the Camera and then to the recorder.
Good luck,
Jens
Antwort von Polecat:
already, the camera has DV in / out. That would be synonymous, the ultimate wisdom, clear. But that is all a roundabout way I want to avoid.
But I think I've found 'something ...
jaap! it works!
I foolishly used the comic "Copy from camcorder" wizard that synonymous owns a camcorder control, etc. .. And who made Natiirl blue.
And now I just simply try the recorder to input: DV to make and it works!
yipiieeh!
Antwort von GhostDog:
I am glad that it worked!
pioneer times when I wrote because of a problem, they told me that they could and could not connect the recorder, "" via firewire.
well, as long as it goes ...
gruss Fire fan [/ b]
Antwort von chrisgau:
Question out of curiosity: What is the encoding encoded with the MPEG encoder for your hard disk recorder, the DV material. Use of fixed predetermined GOPs (Groups of Pictures) or analyzed the material and then chooses - according to the source - different strategies?
Background of my question: I'm inclined to believe that a reasonably rational 2-pass MPEG encoder with s.PC Average 7-8 Mbps achieve the best results, but I was happy to leave of the latest developments s.der Festplattenrecorder Front of a better lecture.
Regards,
chrisgau
Antwort von GhostDog:
So out of pure experience, I must say that the hard disk recorder for me is a blessing!
I would have needed for 2h 16min video material with TMPGenc about 30h, VBR, and a bit of noise reduction. With a 3 GHz Intel Pentium. And the result would have been only satisfactory.
The DVD recorder to take my knowledge fixed settings: You're in Normal Mode can only between five different "quality" option. VBR and it would not synonymous, since he otherwise would have to analyze the video footage before (right?).
Third, if I want to insert intersection that goes only every 13 frames () in a mode. That is what lies s.der GOP structure, right? I can only put one Zylkus intersections s.Beginn and chapter marks ...
Fire-Fan: The Pioneer says this is understandable from a political perspective. Just as we use the device, we have finally a 1A MPEG encoder / DVD Producer / was always synonymous. We go totally digital and lossless 1A sizzle out one DVD ...
Many greetings,
adrian
Antwort von chrisgau:
Aha. So the Pioneer uses a fixed GOP structure and encoded with constant (but selectable) data rate -> CBR.
Ah, yes ... if you use those settings on your computer, it takes 30 hours certainly not synonymous. Safe but still more than in the hard disk recorder with its hardware encoder.
Thanks for the info.
And the result would have been only satisfactory. Try it once with the Cinema Craft Encoder Basic. Achieved very good results (definitely better) than TMPeg.
Regards,
chrisgau
Antwort von Markus:
Hello Chrisgau,
I have a Panasonic DVD recorder of the first generation. The device records in the usual GOP structure (I BBP BBP BBP BB I) with variable data rate. Two hours of video creates the device in good, one hours in very good quality. This is certainly not least s.Hardware MPEG2 encoder, which is specifically responsible for this task.
For me the device, however, encodes only the current TV program, mostly for timeshifting. For edited videos, I have other helpers ... ;-)
Antwort von Polecat:
Hello Chrisgau,
I have since been clinging s.den TMPGenc, because I bought it on the one hand, on the other synonymous invested much effort had to achieve very good results with it ...
And now, I must say that my problem is already done: I will have for everything else now use my DVD recorder. I held out a half years now, my theater friends who produce DVD (dual layer then was synonymous not a theme!).
A Propos: the Pioneer can synonymous, so dual-layer. excellent.
again thanks for the tips,
regards,
Adrian
